Вы запросили

Авторы: Angeli G

Показаны 1−12 из 12 < предыдущая 1 следующая > Показать все
Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Martini L., Bocchi M., Rossi V., Ascade M., Valzasina A., Angeli G., Martino E., Bassi A.L., Casari C.S.

Assembly and Soldering Procedure of Nonstabilized YBCO Coils for 1000 A SFCL

Ключевые слова: HTS, YBCO, coated conductors, coils, solder, FCL resistive, joints, joint resistances, reinforcement, protection layer Ag, fabrication, critical characteristics, current-voltage characteristics, experimental results

IEEE Transactions Applied Superconductivity, 2018, v.28, N 1, p.5600204

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Ohsaki H., Yamada Y., Angeli G., Marchionini B.G.

Technology Collaboration Programme on High-Temperature Superconductivity (HTS): HTS Applications and the Need for International Standardization Activity

Ключевые слова: standards, collaborations, HTS, power equipment, FCL, cables, transformers, generators, SMES

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.5000404

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Bocchi M., Angeli G., Serri L.

Short-Circuit Current Limitation Through 2G YBCO Resistive-Type SFCL Devices: A Model for Technical and Economic Comparison With Traditional Air-Core Reactors

Ключевые слова: power equipment, FCL resistive, HTS, YBCO, coated conductors, modeling, comparison, cost estimate, conventional systems, reactor, core air, short circuit test, current, time evolution, temperature rise

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.5602505

Полный текст на Sci-Hub

Дополнительная информация

Grasso G., Ferdeghini C., Martini L., Breschi M., Turtu S., Ribani P.L., Vignolo M., Morandi A., Nardelli D., Tropeano M., Corte A.D., Angeli G., Anemona A., Gandolfi C., Grandi G., Melaccio U., Siri S.

The DRYSMES4GRID Project: Development of a 500 kJ/200 kW Cryogen-Free Cooled SMES Demonstrator Based on MgB2

Ключевые слова: power equipment, SMES, cryogenic systems, conduction cooled systems, MgB2, coils, wires round, design, design parameters, discharge characteristics, hot spots, heat loads, modeling, numerical analysis

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.5700205

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Grilli F., Bocchi M., Brambilla R., Angeli G.

A Finite-Element Method Framework for Modeling Rotating Machines With Superconducting Windings

Ключевые слова: rotating machines, modeling, HTS, coated conductors, winding techniques

IEEE Transactions Applied Superconductivity, 2018, v.28, N 5, p.5207511

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Bocchi M., Rossi V., Ascade M., Valzasina A., Angeli G.

Development of Superconducting Devices for Power Grids in Italy: Update About the SFCL Project and Launching of the Research Activity on HTS Cables

Ключевые слова: power, power equipment, FCL, cables, status, plans, power distribution system, cooling technology, short circuit test, HTS, YBCO, coils, coated conductors, test results, ac losses, modeling

IEEE Transactions Applied Superconductivity, 2017, v.27, N 4-2, p.5600406

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Bocchi M., Rossi V., Ascade M., Valzasina A., Angeli G., Ravetta C.

Status of Superconducting Fault Current Limiter in Italy: Final Results From the In-Field Testing Activity and Design of the 9 kV/15.6 MVA Device

Ключевые слова: Bi-based systems, critical characteristics, current-voltage characteristics, YBCO, coated conductors, coils, prototype, short circuit test, ac losses, experimental results, power equipment, power distribution system, FCL resistive, HTS

IEEE Transactions Applied Superconductivity, 2016, v.26, N 3, p.5600705

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Bocchi M., Rossi V., Ascade M., Valzasina A., Angeli G., Ravetta C., Fratti S., Martino E.

Live grid field-testing final results of the first Italian Superconducting Fault Current Limiter and severe 3-phase fault experience

Ключевые слова: power equipment, power distribution system, FCL resistive, design parameters, short circuit test, resistance, FCL three-phase, HTS, YBCO, coated conductors

IEEE Transactions Applied Superconductivity, 2015, v.25, N 3, p.5600405

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Bocchi M., Rossi V., Ascade M., Valzasina A., Angeli G., Ravetta C.

The first Italian Superconducting Fault Current Limiter: Results of the field testing experience after one year operation

Ключевые слова: power equipment, HTS, FCL resistive, Bi2223, power distribution system, test long-term operation, design parameters, time evolution, transport currents, cryogenic systems, cryostat, pressure effect

J Physics: Conference Series, 2014, v.507, N 3, p.32003

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Dutoit B., Bocchi M., Colangelo D., Angeli G.

Electrical and Thermal Characterization of Commercial Superconducting YBCO Coated Conductors

Ключевые слова: HTS, YBCO, coated conductors, ac performance, nitrogen liquid , time evolution, critical characteristics, current-voltage characteristics, numerical analysis, electric field, modeling, thermal properties, experimental results

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.6602304

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Bocchi M., Rossi V., Ascade M., Valzasina A., Angeli G., Ravetta C.

Live-grid installation and field testing of the first Italian Superconducting Fault Current Limiter

Ключевые слова: power equipment, HTS, FCL resistive, Bi2223/Ag, tapes, grid operation, design, fabrication, test results

EUROPEAN SUPERCONDUCTIVITY NEWS FORUM, 2012, v.22, N 1, p.306

Полный текст на Sci-Hub

Дополнительная информация

Martini L., Rossi V., Valzasina A., Angeli G., Ravetta C.

Development, Testing and Installation of a Superconducting Fault Current Limiter for Medium Voltage Distribution Networks

Ключевые слова: power equipment, distribution, FCL resistive, design, design parameters, critical current, critical current, ac losses, dielectric properties, discharge characteristics, short circuit test, HTS, Bi2223, tapes

Physics Procedia, 2012, v.36, N , p.914-920

Полный текст на Sci-Hub

Дополнительная информация

Главная | Новости | Бюллетень | Конференции | Поиск публикаций в базе данных | Новое в базе данных
Российские организации | Энциклопедия | Цели сайта | Контакты | Полезные ссылки | Карта сайта | Помощь

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.