Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Авторы: Guan M.
Показаны 1−20 из 36	< предыдущая 1 2 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Zhou Y., Chen J., Wang S., Wang X., Guan M.

A visual and full-field method for detecting quench and normal zone propagation in HTS tapes

Ключевые слова: HTS, YBCO, coated conductors, tapes, quench detection, normal zone propagation, measurement technique, measurement setup, mechanical properties, strain effects, experimental results

Superconductor Science Technology, 2022, v.35, N 2, p.25010

Полный текст на Sci-Hub

Дополнительная информация

Pan Y., Guan M.

Characterization of Multi-field Behaviors on Fatigue Damage Due to High Cyclic Loading in YBCO-Coated Conductors Fabricated by the IBAD-PLD Technology

Ключевые слова: HTS, YBCO, coated conductors, IBAD process, PLD process, tapes, cycling, loads, mechanical properties, fatigue behavior, crack formation, microstructure, measurement setup, tensile tests, stress effects, degradation studies, critical current

J Low Temperature Physics, 2022, v.207, N 1-2, p.97-114

Полный текст на Sci-Hub

Дополнительная информация

Wang X., Sun L., Chen Y., Wu W., Zhao H., Zheng S., Guan M., Xin C., Wu B., Mei E., Ou X.

Mechanical Analysis and Validation of the Prototype of Nb3Sn Superconducting Magnet Structure With Dummy Coils for FECR Ion Source

Ключевые слова: accelerator magnets, ion sources, LTS, Nb3Sn, magnets, design, prototype, magnetic systems, coils, mechanical properties, modeling, stress effects, strain effects, numerical analysis, experimental results, loads, cooling technology, supporting structure

IEEE Transactions Applied Superconductivity, 2022, v.32, N 6, p.4006207

Полный текст на Sci-Hub

Дополнительная информация

Chen Y., Wu W., Yao Q., Zheng S., Guan M., Liang Y., Ni D., Mei E., Tong Y., Ou X.

Electro-Thermal Coupling Model of Quench Protection With a Quench-Back for DCT&CCT Superconducting Magnets

Ключевые слова: magnets, LTS, NbTi, cables, design parameters, quench protection, Nb3Sn, Rutherford cables, discharge characteristics, hot spots, modeling, numerical analysis

IEEE Transactions Applied Superconductivity, 2022, v.32, N 6, p.4701106

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Wang X., Guan M., Gao P.

Electromagnetic-thermal-structure multi-layer nonlinear elastoplastic modelling study on epoxy-impregnated REBCO pancake coils in high-field magnets

Ключевые слова: HTS, REBCO, coated conductors, tapes, coils pancake, impregnation, mechanical properties, cooling technology, stress distribution, elastic behavior, modeling, numerical analysis

SUPERCONDUCTIVITY, 2022, v.1, N 1, p.100002

Полный текст на Sci-Hub

Дополнительная информация

Li Y., Yang Z., Qu T., Feng F., Song P., Guan M.

Effect of edge cracks on critical current degradation in REBCO tapes under tensile stress

Ключевые слова: HTS, REBCO, tapes, mechanical properties, stress effects, strain effects, fracture behavior, crack formation, critical current, degradation studies, surface, microstructure, tensile tests, measurement setup

SUPERCONDUCTIVITY, 2022, v.1, N 1, p.100007

Полный текст на Sci-Hub

Дополнительная информация

Li Y., Qu T., Yan Y., Liu H., Song P., Guan M., Xin C.

Screening-current-induced mechanical strains in REBCO insert coils

Ключевые слова: HTS, REBCO, tapes, coils insert, design parameters, screening current, mechanical properties, mechanical strain, measurement technique, magnetic field distribution, current distribution, experimental results, numerical analysis, screen

Superconductor Science Technology, 2021, v.34, N 8, p.85012

Полный текст на Sci-Hub

Дополнительная информация

Yang Z., Qu T., Song P., Guan M., Feng F.*3

Critical current degradation and delamination crack observation of epoxy-coated REBCO superconducting tapes after thermal cycles in liquid nitrogen

Ключевые слова: HTS, REBCO, tapes, insulation coating, impregnation, laminations, crack formation, thermal performance, cycling, thermal stress, critical caracteristics, critical current, degradation studies, microstructure, stress distribution, delamination

Ceramics International, 2021, v.47, N 21, p.29824-29831

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Wang X., Guan M., Hu Q.

Magneto-Mechanical Coupling Analysis of a Superconducting Solenoid Using FEM With Different Approaches

Ключевые слова: coils solenoidal, mechanical properties, magnetic properties, modeling, numerical analysis, deformation, LTS, NbTi, Nb3Sn, magnetic field distribution, stress distribution, strain effects, distribution

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.4900305

Полный текст на Sci-Hub

Дополнительная информация

Qu T., Tan Y., Yan Y., Liu H., Guan M., Xin C.

Screening current effect on the stress and strain distribution in REBCO high-field magnets: experimental verification and numerical analysis

Ключевые слова: high field magnets, LTS, coils outer, HTS, REBCO, coated conductors, coils insert, screening current, shielding effects, mechanical properties, stress distribution, strain effects, distribution, experimental results, numerical analysis, modeling, screen

Superconductor Science Technology, 2020, v.33, N 5, p.2

Полный текст на Sci-Hub

Дополнительная информация

Wang X., Sun L., Chen Y., Wu W., Zhao H., Guan M., Xin C., Wu B.

Mechanical Responses of a Combined Support Structure for a Nb3Sn Sextupole Magnet During Assembly and Thermal Cycle

Ключевые слова: LTS, Nb3Sn, magnets sextupole, supporting structure, mechanical properties, strain effects, thermal performance, cycling, design, test results

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.4002905

Полный текст на Sci-Hub

Дополнительная информация

Guan M., Xin C., Gao P.

A dynamic strain-based quench-detection method in an LTS sextupole magnet during excitation and quench

Ключевые слова: LTS, NbTi, magnets sextupole, design parameters, quench detection, strain effects, measurement technique, dynamic operation, vibration, frequency dependence, experimental results

Superconductor Science Technology, 2020, v.33, N 11, p.11510

Полный текст на Sci-Hub

Дополнительная информация

Wang X., Guan M., Hu Q., Wu B.

Strain Responses of Superconducting Magnets Based on Embedded Polymer-FBG and Cryogenic Resistance Strain Gauge Measurements

Ключевые слова: LTS, NbTi, coils racetrack, Nb3Sn, coils solenoidal, magnets, mechanical properties, strain effects, measurement technique, quench, experimental results

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.8400207

Полный текст на Sci-Hub

Дополнительная информация

Guan M., Xin C.

Shallow Embedded Strain Measurements and Analysis for a NbTi Superconducting Sextupole Coil During Cooling, Excitation, and Quench

Ключевые слова: LTS, NbTi, magnets sextupole, coils, cooling technology, excitation system, quench properties, mechanical properties, strain effects, elastic behavior, thermal strain, experimental results, numerical analysis

J Superconductivity Novel Magnetism, 2019, v.32, N 2, p.175-183

Полный текст на Sci-Hub

Дополнительная информация

Guan M., Xin C.

The sensitivity of distributed temperature sensor system based on Raman scattering under cooling down, loading and magnetic field

Ключевые слова: temperature dependence, sensors, Raman spectroscopy, cooling technology, measurement technique, mechanical training, magnetic field dependence, cryogenic systems, sensitivity analysis

Cryogenics, 2019, v.100, N , p.36-40

Полный текст на Sci-Hub

Дополнительная информация

Wu W., Liao C., Guan M., Xin C., Gao P., Wu B., Wei X.

Numerical investigation on decreasing radial stress in epoxy impregnated REBCO pancake coils by overband

Ключевые слова: HTS, REBCO, coated conductors, coils pancake, impregnation, mechanical properties, stress effects, stress distribution, degradation studies, numerical analysis

Cryogenics, 2019, v.103, N , p.102971

Полный текст на Sci-Hub

Дополнительная информация

Wang X., Guan M., Tong Y.

Theoretical estimation of quench occurrence and propagation based on generalized thermoelasticity for LTS/HTS tapes triggered by a spot heater

Ключевые слова: LTS, HTS, tapes, quench propagation, thermal properties, elastic behavior, normal zone propagation, heat transfer, modeling, numerical analysis

Superconductor Science Technology, 2017, v.30, N 4, p.45002

Полный текст на Sci-Hub

Дополнительная информация

Iwasa Y., Hahn S., Bascunan J., Qu T., Michael P.C., Lecrevisse T., Guan M.

Test of an 8.66-T REBCO Insert Coil With Overbanding Radial Build for a 1.3-GHz LTS/HTS NMR Magnet

Ключевые слова: NMR magnet, LTS, HTS, hybrid systems, coils insert, REBCO, test results, coils pancake, insulationless, design parameters, fabrication, voltage, magnetic field distribution, nitrogen liquid , helium liquid, experimental results

IEEE Transactions Applied Superconductivity, 2017, v.27, N 4-2, p.4600605

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Wang X., Guan M.

The Influence of Strain Rate on the Tensile Properties of a Nb–Ti/Cu Superconducting Composite Wire Under Variable Cryogenic Temperature

Ключевые слова: LTS, NbTi, composites, mechanical properties, strain effects, strain effects, tensile tests, cryogenic systems, temperature dependence

IEEE Transactions Applied Superconductivity, 2016, v.26, N 2, p.8400205

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Iwasa Y., Wang X., Hahn S., Bascunan J., Guan M., Gao P.

A Parametric Study on Overband Radial Build for a REBCO 800-MHz Insert of a 1.3-GHz LTS/HTS NMR Magnet

Ключевые слова: NMR magnet, LTS, HTS, REBCO, coated conductors, coils pancake, mechanical properties, stress effects, numerical analysis, modeling, coils insert

IEEE Transactions Applied Superconductivity, 2016, v.26, N 4, p.4301205

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Авторы: Guan M.

A visual and full-field method for detecting quench and normal zone propagation in HTS tapes

Characterization of Multi-field Behaviors on Fatigue Damage Due to High Cyclic Loading in YBCO-Coated Conductors Fabricated by the IBAD-PLD Technology

Mechanical Analysis and Validation of the Prototype of Nb3Sn Superconducting Magnet Structure With Dummy Coils for FECR Ion Source

Electro-Thermal Coupling Model of Quench Protection With a Quench-Back for DCT&CCT Superconducting Magnets

Electromagnetic-thermal-structure multi-layer nonlinear elastoplastic modelling study on epoxy-impregnated REBCO pancake coils in high-field magnets

Effect of edge cracks on critical current degradation in REBCO tapes under tensile stress

Screening-current-induced mechanical strains in REBCO insert coils

Critical current degradation and delamination crack observation of epoxy-coated REBCO superconducting tapes after thermal cycles in liquid nitrogen

Magneto-Mechanical Coupling Analysis of a Superconducting Solenoid Using FEM With Different Approaches

Screening current effect on the stress and strain distribution in REBCO high-field magnets: experimental verification and numerical analysis

Mechanical Responses of a Combined Support Structure for a Nb3Sn Sextupole Magnet During Assembly and Thermal Cycle

A dynamic strain-based quench-detection method in an LTS sextupole magnet during excitation and quench

Strain Responses of Superconducting Magnets Based on Embedded Polymer-FBG and Cryogenic Resistance Strain Gauge Measurements

Shallow Embedded Strain Measurements and Analysis for a NbTi Superconducting Sextupole Coil During Cooling, Excitation, and Quench

The sensitivity of distributed temperature sensor system based on Raman scattering under cooling down, loading and magnetic field

Numerical investigation on decreasing radial stress in epoxy impregnated REBCO pancake coils by overband

Theoretical estimation of quench occurrence and propagation based on generalized thermoelasticity for LTS/HTS tapes triggered by a spot heater

Test of an 8.66-T REBCO Insert Coil With Overbanding Radial Build for a 1.3-GHz LTS/HTS NMR Magnet

The Influence of Strain Rate on the Tensile Properties of a Nb–Ti/Cu Superconducting Composite Wire Under Variable Cryogenic Temperature

A Parametric Study on Overband Radial Build for a REBCO 800-MHz Insert of a 1.3-GHz LTS/HTS NMR Magnet