Вы запросили

Авторы: Jin H

Показаны 1−20 из 47 < предыдущая 1 2 3 следующая > Показать все
Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Shi Y., Zhang X., Jin H., Chen H., Tan Y., Liu H., Liu F.

Design and Electromechanical Properties of Round HTS Strand With Soldered Multilayer Copper Tapes as Filler and Tube

Ключевые слова: twisting, critical characteristics, critical current, n-value, bending strain, high field magnets, HTS, REBCO, coated conductors, tapes multifilamentary, stacked blocks, cables, strand geometry, wires round, fabrication, milling process, solder, Cu-based conductors, tapes

IEEE Transactions Applied Superconductivity, 2021, v.31, N 1, p.4200104

Полный текст на Sci-Hub

Дополнительная информация

Hu L., Zhang Y., Shi Y., Han H., Wu K., Xu A., Jin H., Wu Y., Wu J., Yu X., Hao Q., Dai C.

Electromagnetic and Mechanical Analysis of DC Magnet for Super X Test Facility

Ключевые слова: measurement setup, magnetic systems, coils, series connection, cable-in-conduit conductor, series connection, LTS, Nb3Sn, mechanical properties, stress distribution, magnetic field distribution

IEEE Transactions Applied Superconductivity, 2021, v.31, N 1, p.4200205

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Zhang X., Jin H., Chen H., Tan Y., Liu H., Liu F.

Critical Current Characteristics of HTS Round Strand Using REBCO Tapes Under Transverse and Cyclic Load

Ключевые слова: HTS, REBCO, tapes, strands, wires round, cables, twisting, solder, Cu-based conductors, mechanical properties, transverse strain, cycling, loads, measurement setup, critical characteristics, critical current, pressure dependence, experimental results

IEEE Transactions Applied Superconductivity, 2021, v.31, N 1, p.4200305

Полный текст на Sci-Hub

Дополнительная информация

Xiao L., Xin Y., Li Q., Xiong J., Huang Y., Jin H., Song M., Wang C., Li C., li B., Yang C., Yang T., Ma T., Sheng C., Luo P.

Current limiting tests of a prototype 160 kV/1 kA resistive DC superconducting fault current limiter

Ключевые слова: power equipment, FCL resistive, prototype, design parameters, HTS, GdBCO, coated conductors, fabrication, current limiting characteristics, test results, high voltage tests, dc performance, quench, resistance, time evolution

Superconductor Science Technology, 2021, v.34, N 1, p.14002

Полный текст на Sci-Hub

Дополнительная информация

Xin Y., Li Q., Jin H., Tian B., Li W., Yang T., Hong W.

Feasibility study of high temperature superconducting cables for distribution power grids in metropolises

Ключевые слова: power equipment, power distribution system, HTS, cables three-phase, cables cold-dielectric, cables warm-dielectric, conventional systems, comparison, China, power supply, efficiency, numerical analysis, cryocoolers, current, length, power losses

Superconductor Science Technology, 2020, v.33, N 1, p.14002

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Zhang X., Jin H., Lei L., Tan Y., Liu H., Yu M., Liu F., Guo L.

Quasi-Round HTS Conductor Using REBCO Tapes for Fusion Magnet Application

Ключевые слова: fusion magnets, HTS, REBCO, coated conductors, wires round, stacked blocks, twisting, fabrication, photo, design parameters, bending radius, critical current, critical current, bending strain, experimental results

IEEE Transactions Applied Superconductivity, 2020, v.30, N 1, p.4800104

Полный текст на Sci-Hub

Дополнительная информация

Xin Y., Li J., Jin H., Zhao C., Wen Y., Hong W.

Magnetic Levitation Characteristics of HTS Bulk Above Electromagnets

Ключевые слова: Maglev system, HTS, bulk, levitation performance, magnetic field distribution, displacements, experimental results, numerical analysis

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.3600905

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Han H., Li J., Hu Y., Jin H., Wang T., Song J., Wang W., Ma G., Wu Y., Li T., Liu H., Qin J., Jin J., Guo L., Yin D.

Manufacturing Status of CFETR Central Solenoid Model Coil

Ключевые слова: Tokamak, central coils, winding process, heat treatment, joints, joint resistances, LTS, NbTi, Nb3Sn, cable-in-conduit conductor, coils insert, coils outer, impregnation, fabrication, design, design parameters, test results, coils model

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.4201904

Полный текст на Sci-Hub

Дополнительная информация

Li J., Jin H., Qin J., Zhou C., Xiao G., Gao P., Xue S.

The effect of strain and filament fracture on the transport properties of ITER cable-in-conduit conductors

Ключевые слова: ITER, LTS, Nb3Sn, cable-in-conduit conductor, mechanical properties, strain effects, filaments, fracture behavior, crack formation, current-voltage characteristics, critical temperature, SULTAN, experimental results

AIP Advances, 2020, v.10, N 6, p.65011

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Li J., Jin H., Chen H., Li C., Liu H., Liu F., Qin J., Zhou C., Dai C.

Critical Current Under Uniaxial Strain on High-Pressure Heat Treatment Bi-2212 Round Wire

Ключевые слова: HTS, Bi2212, wires round, mechanical properties, strain effects, critical characteristics, critical current, heat treatment, high pressure processing, fabrication, PIT process

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.6400304

Полный текст на Sci-Hub

Дополнительная информация

Jin H., Jin H., Yu M., Yu M., Liu F., Liu F., Qin J., Qin J., Yang D., Yang D.

Performance and Microstructure of Bi-2212 Wire under Different OverPressures Heat-treatment

Ключевые слова: HTS, Bi2212, wires round, fabrication, overpressure processing, heat treatment, microstructure, grain size, distribution

J Physics: Conference Series, 2020, v.1559, N , p.12025

Полный текст на Sci-Hub

Дополнительная информация

Jin H., Liu H.J., Liu F., Zhou C., Li J.G., Qin J.G., Xiao G.Y., Dai T.L., Zhang X.T.

Experimental study on cabling properties of different REBCO coated tapes

Ключевые слова: HTS, REBCO, coated conductors, tapes, CORC cables, fabrication, former, Cu-based conductors, winding techniques, critical characteristics, current-voltage characteristics, thickness dependence, width, experimental results

J Physics: Conference Series, 2020, v.1559, N , p.12111

Полный текст на Sci-Hub

Дополнительная информация

Jin H., Wu K.H., Wu Y., Tan Y.F., Liu H.J., Liu F., Li J.J., Zhou C., Jiang D.H., Gao P., Li J.G., Qin J.G., Xiao G.Y., Ma H.J., Mai T.

The performance of first CORC cable solenoid insert for development of CFETR high-field magnet

Ключевые слова: high field magnets, coils solenoidal, design parameters, fabrication, HTS, CORC cables, cycling, critical current, magnetic field dependence, test results, critical characteristics, current-voltage characteristics, n-value

Nuclear Fusion, 2020, v.60, N 9, p.96028

Полный текст на Sci-Hub

Дополнительная информация

Li X., Zhang Y., Shi Y., Zhang X., Jin H., Lei L., Wu Y., Liu H., Liu F., Qin J., Ma H.

Properties of Toroidal Field Nb3Sn Strands Made for the ITER Chinese Domestic Agency

Ключевые слова: ITER, LTS, Nb3Sn, strands, coils toroidal, China, critical current distribution, n-value, distribution, mechanical properties, strain effects, stress effects, tensile tests, test results

IEEE Transactions Applied Superconductivity, 2019, v.29, N 5, p.6000504

Полный текст на Sci-Hub

Дополнительная информация

Liu X., Zhang X., Devred A., Nijhuis A., Jin H., Wu Y., Liu H., Qin J., Zhou C., Yue D., Dai C.

Rotation analysis on large complex superconducting cables based on numerical modeling and experiments

Ключевые слова: LTS, Nb3Sn, design parameters, cables, fabrication, twisting, jacketing, mechanical properties, degradation studies, tensile tests, rotating, numerical analysis

Superconductor Science Technology, 2018, v.31, N 2, p.25001

Полный текст на Sci-Hub

Дополнительная информация

Liu B., Shi Y., Jin H., Wu Y., Liu H., Yu M., Liu F., Qin J., Hao Q.

DC performance measurement and of Nb3Sn Cable-In-Conduit Conductor for CFETR CS model coil

Ключевые слова: Tokamak, central coils, LTS, Nb3Sn, cable-in-conduit conductor, strands, twist-pitch, design parameters, fabrication, current sharing, measurement setup, SULTAN, mechanical properties, critical characteristics, critical current, strain effects, magnetic field dependence, experimental results, numerical analysis

Fusion Engineering Design, 2018, v.126, N , p.29-35

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Jin H., Lei L., Tan Y.F., Liu H.J., Yu M., Liu F., Guo L., Hong Z.Y.

Development of an YBCO coil with SSTC conductors for high field application

Ключевые слова: HTS, YBCO, coated conductors, coils pancake, fabrication, design parameters, magnetic field distribution, critical characteristics, critical current, ac magnetic field dependence, current-voltage characteristics, experimental results

Physica C, 2018, v.550, N , p.10-13

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Nijhuis A., Jin H., Wu Y., Liu H., Liu F., Qin J., Zhou C., Hao Q., Yagotintsev K.

Mechanical and Electrical Properties of a CFETR CSMC Conductor Under Transverse Mechanical Loadings

Ключевые слова: Tokamak, central coils, LTS, Nb3Sn, cable-in-conduit conductor, mechanical properties, transverse strain, loads, displacements, contact characteristics, resistance, pressure effect, cycling, ac losses, experimental results, numerical analysis

IEEE Transactions Applied Superconductivity, 2018, v.28, N 6, p.8401105

Полный текст на Sci-Hub

Дополнительная информация

Liu L., Jin H., Wang T., Wu Y., Zhang H., Liu S., Qin J., Zhou C., Dai C., Kosse J.J.

A Numerical Adiabatic Model for the Quench Behavior Analysis of the Ag-Matrix Bi-2212 Round Wire

Ключевые слова: Bi2212, wires round, quench properties, modeling, numerical analysis, minimum quench energy, normal zone propagation

IEEE Transactions Applied Superconductivity, 2018, v.28, N 8, p.6400706

Полный текст на Sci-Hub

Дополнительная информация

Zhang Y., Shi Y., Li F., Jin H., Wu Y., Liu H., Liu F., Qin J., Zhou C., Dai C., Mao Z., Ma H.

Indentation effects on strain sensitivity of critical current for internal-tin Nb3Sn strand

Ключевые слова: LTS, Nb3Sn, strands, mechanical properties, strain effects, internal tin method, mechanical treatment, RRR parameter, critical characteristics, critical current, stress effects, experimental results

Fusion Engineering Design, 2018, v.137, N , p.373-377

Полный текст на Sci-Hub

Дополнительная информация

Главная | Новости | Бюллетень | Конференции | Поиск публикаций в базе данных | Новое в базе данных
Российские организации | Энциклопедия | Цели сайта | Контакты | Полезные ссылки | Карта сайта | Помощь

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.