Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Авторы: Li H.
Показаны 1−20 из 58	< предыдущая 1 2 3 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Li H., Li Z., Zhang C., Zhang T., Zheng X., Jiao C.

Study of the electromagnetic characteristics of multiple HTSPPT modules based on the configuration of toroidal structure for inductive pulsed power supply

Ключевые слова: numerical analysis, critical characteristics, critical current density, magnetic field distribution, power supply, pulsed current, HTS, transformers, Bi2223/Ag, tapes, coils toroidal, modular system

Cryogenics, 2018, v.91, N , p.21-26

Полный текст на Sci-Hub

Дополнительная информация

Xie Y., Li H., Chen X., Li J., Shi L., Fang M., Ouyang Z., Meng Q., Ai X., Kuang D.

Operation of the Helium Cryogenic System for the Hybrid Superconducting Outsert at CHMFL

Ключевые слова: hybrid systems, high field magnets, coils outer, LTS, Nb3Sn, cable-in-conduit conductor, forced flow conductor, helium supercritical, cryogenic systems, operational performance, cooling technology

IEEE Transactions Applied Superconductivity, 2018, v.28, N 3, p.4300604

Полный текст на Sci-Hub

Дополнительная информация

Doping-Induced Isotopic Mg_11^B2 Bulk Superconductor for Fusion Application

Ключевые слова: MgB2, bulk, magnetization, microstructure, critical characteristics, Jc/B curves

Energies, 2017, v.10, N 3, p.409

Полный текст на Sci-Hub

Дополнительная информация

Li H., Zheng J., Li J., Huang H., Deng Z., Zheng B.

Nonlinear vibration behaviors of high-Tc superconducting bulks in an applied permanent magnetic array field

Ключевые слова: HTS, bulk, vibration, magnetic field dependence, modeling, levitation performance, numerical analysis, YBCO, experimental results

J Applied Physics, 2017, v.121, N 24, p.243901

Полный текст на Sci-Hub

Дополнительная информация

Li H., Hu Y., Li Z., Zhang C., Zheng X., Gao M.

An Inductive Pulsed-Power Supply Circuit Consisting of Multiple HTSPPT Modules With Capacitor Reuse Methodology

Ключевые слова: power equipment, pulsed operation, power supply, induction, transformers, HTS, electromagnetic launch, Bi2223/Ag, tapes, coils pancake, SMES, modeling

IEEE Transactions Plasma Science, 2017, v.45, N 7, p.1139-1145

Полный текст на Sci-Hub

Дополнительная информация

Li H., Zhang X., Li Z., Zhang C., Liu S.

A Zero-Current Opening Circuit for Inductive Pulsed-Power Supply Based on High-Temperature Superconducting Pulsed-Power Transformer

Ключевые слова: HTS, transformers, pulsed operation, power supply, switches, switching process, modeling, numerical analysis

IEEE Transactions Plasma Science, 2017, v.45, N 9, p.2536-2540

Полный текст на Sci-Hub

Дополнительная информация

Li H., Zheng J., Li J., Huang H., Deng Z., Zheng B., Quan N.

Correlations Between Magnetic Flux and Levitation Force of HTS Bulk Above a Permanent Magnet Guideway

Ключевые слова: HTS, YBCO, bulk, levitation performance, Maglev system, flux density, experimental results

J Low Temperature Physics, 2017, v.189, N 1-2, p.42-52

Полный текст на Sci-Hub

Дополнительная информация

Li Y., Li H., Zheng J., Li J., Huang H.

Motion stability of the magnetic levitation and suspension with YBa2Cu3O7-x high-Tc superconducting bulks and NdFeB magnets

Ключевые слова: Maglev system, stability, levitation performance, HTS, YBCO, bulk, suspension, numerical analysis

J Applied Physics, 2017, v.122, N 15, p.153902

Полный текст на Sci-Hub

Дополнительная информация

Zheng J., Deng Z.G., Sun R.X., Zhan L.J., Huang S.Y., Li H.T.

Design and fabrication of a hybrid maglev model employing PML and SML

Ключевые слова: Maglev system, hybrid systems, magnets permanent, levitation performance, HTS, bulk, stability, model small-scale, experimental results

International J Modern Physics B, 2017, v.31, N 25, p.1745014

Полный текст на Sci-Hub

Дополнительная информация

Li H., Liu Y., Hossain M.S., Liu C., Ma Z., Cheng F., Yamauchi Y., Fatehmulla A., Farooq W.A., Bando Y.

Enhancement of grain connectivity and critical current density in the ex-situ sintered MgB2 superconductors by doping minor Cu

Ключевые слова: MgB2, bulk, ex-situ process, sintering, grain structure, doping effect, microstructure, grain size, critical temperature, critical characteristics, Jc/B curves, resistive transition, resistivity, temperature dependence, fabrication, experimental results

J Alloys Compounds, 2017, v.727, N , p.1105-1109

Полный текст на Sci-Hub

Дополнительная информация

Goto T., Shi J., Li Q., Zhang L., Li H., Wang T., Yang M., Zhang S., Tu R., Wang K.

Thickness dependence of structure and superconductivity of the SmBa2Cu3O7 film by laser CVD

Ключевые слова: HTS, SmBCO, substrate LaAlO3, laser application, CVD process, thickness dependence, angular dependence, microwave devices, critical characteristics, growth rate, X-ray diffraction, resistive transition, current-voltage characteristics, critical current density, experimental results

RSC Advances, 2017, v.7, N 89, p.56166-56172

Полный текст на Sci-Hub

Дополнительная информация

Hong Z., Li Z.Y., Ma J., Sheng J., Jin Z., Yao Z.H., Gan H.Y., Li H.J., Ai X.Z.

Experimental and numerical study of a DC induction heater prototype with an adjustable air gap structure

Ключевые слова: induction heating, experimental results, numerical analysis, dc performance, HTS, prototype, core iron, temperature distributions

IEEE Transactions Applied Superconductivity, 2016, v.26, N 4, p.4900605

Полный текст на Sci-Hub

Дополнительная информация

Sun Y., Wang L., Li H., Li G., Zhang B., Shen B., Qian J., Jia M., Zhong F., Gan K.

Vacuum modeling of three-dimensional magnetic field topology under resonant magnetic perturbations on EAST

Ключевые слова: Tokamak, modeling, nucleation, magnetic field distribution, magnetic field dependence, vacuum structure

Plasma Physics Controlled Fusion, 2016, v.58, N 5, p.55010

Полный текст на Sci-Hub

Дополнительная информация

Li H., Zheng J., Li J., Deng Z., Wang B., Qian N., Si S.

Dynamic response characteristics of the high-temperature superconducting maglev system under lateral eccentric distance

Ключевые слова: Maglev system, HTS, YBCO, bulk, stiffness, levitation performance, experimental results, model small-scale, dynamic operation

Cryogenics, 2016, v.77, N , p.1-7

Полный текст на Sci-Hub

Дополнительная информация

Li H., Liu Y., Ma Z., Cai Q., GUO Q.

Second-phase segregation and micro strain/lattice parameter dependent transition temperature in polycrystalline MgB2

Ключевые слова: MgB2, bulk, phase formation, phase composition, X-ray diffraction, fabrication, mechanical properties, strain effects, lattice parameter, critical temperature, doping effect, critical characteristics, Jc/B curves, microstructure, grain size, pinning force

Superconductor Science Technology, 2016, v.29, N 10, p.105013

Полный текст на Sci-Hub

Дополнительная информация

Li H., Zhang X., Ma Y., Ni B., Gu Q.

Critical Current and Flux Pinning Characteristics in Sr0.6K0.4Fe2As2 Superconducting Tapes

Ключевые слова: pnictides, tapes, PIT process, ex-situ process, fabrication, microstructure, penetration depth, magnetic field dependence, critical characteristics, Jc/B curves, pinning, experimental results

IEEE Transactions Applied Superconductivity, 2016, v.26, N 3, p.8000204

Полный текст на Sci-Hub

Дополнительная информация

Li H., Hu Y., Li Z., Zhang C., Zheng X., Gao M.

Influence of Critical Parameters on the Performance of a Superconducting Inductive Pulsed-Power Supply Circuit

Ключевые слова: power supply, pulsed operation, critical characteristics, transformers, power equipment, current waveforms, numerical analysis, inductance, switches

IEEE Transactions Plasma Science, 2016, v.44, N 8, p.1435-1441

Полный текст на Sci-Hub

Дополнительная информация

Li H., Xiong J., Liu Y., Ma Z., Cai Q., Qin F., GUO Q.

Evaluation of quenching-induced lattice strain and superconducting properties in un-doped and glycine-doped MgB2 bulks

Ключевые слова: MgB2, bulk, doping effect, sintering, fabrication, heat treatment, mechanical properties, strain effects, X-ray diffraction, magnetization, critical characteristics, Jc/B curves, pinning force, experimental results

J Materials Science - Materials Electronics, 2016, v.27, N 9, p.0

Полный текст на Sci-Hub

Дополнительная информация

Liu B., Jin H., Wu Y., Liu S., Long F., Liu F., Jin J., Wang K., Su C., Qin J.-G., Liu H.-J., Yang Z.-Y., Pang Y.-C., Wei Z.-R., Xue T.-J., Li H.-W., Niu E.-W.

Status of the ITER Conductors in China

Ключевые слова: China, ITER, status, fabrication, coils toroidal, coils poloidal field, central coils, LTS, NbTi, Nb3Sn, cable-in-conduit conductor, critical characteristics, jacketing, mechanical properties, composition

IEEE Transactions Applied Superconductivity, 2016, v.26, N 4, p.6000405

Полный текст на Sci-Hub

Дополнительная информация

Li H., Liu Y., Ma Z., Cai Q., GUO Q.

Variation of MgB2 growth mode and enhancement of critical current density by instantaneously 800 °C-triggered low-temperature sintering

Ключевые слова: MgB2, bulk, fabrication, sintering, critical characteristics, grain structure, X-ray diffraction, lattice parameter, phase composition, microstructure, magnetization, Jc/B curves

Scripta Materialia, 2016, v.124, N , p.184-188

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Авторы: Li H.

Study of the electromagnetic characteristics of multiple HTSPPT modules based on the configuration of toroidal structure for inductive pulsed power supply

Operation of the Helium Cryogenic System for the Hybrid Superconducting Outsert at CHMFL

Doping-Induced Isotopic Mg_11^B2 Bulk Superconductor for Fusion Application

Nonlinear vibration behaviors of high-Tc superconducting bulks in an applied permanent magnetic array field

An Inductive Pulsed-Power Supply Circuit Consisting of Multiple HTSPPT Modules With Capacitor Reuse Methodology

A Zero-Current Opening Circuit for Inductive Pulsed-Power Supply Based on High-Temperature Superconducting Pulsed-Power Transformer

Correlations Between Magnetic Flux and Levitation Force of HTS Bulk Above a Permanent Magnet Guideway

Motion stability of the magnetic levitation and suspension with YBa2Cu3O7-x high-Tc superconducting bulks and NdFeB magnets

Design and fabrication of a hybrid maglev model employing PML and SML

Enhancement of grain connectivity and critical current density in the ex-situ sintered MgB2 superconductors by doping minor Cu

Thickness dependence of structure and superconductivity of the SmBa2Cu3O7 film by laser CVD

Experimental and numerical study of a DC induction heater prototype with an adjustable air gap structure

Vacuum modeling of three-dimensional magnetic field topology under resonant magnetic perturbations on EAST

Dynamic response characteristics of the high-temperature superconducting maglev system under lateral eccentric distance

Second-phase segregation and micro strain/lattice parameter dependent transition temperature in polycrystalline MgB2

Critical Current and Flux Pinning Characteristics in Sr0.6K0.4Fe2As2 Superconducting Tapes

Influence of Critical Parameters on the Performance of a Superconducting Inductive Pulsed-Power Supply Circuit

Evaluation of quenching-induced lattice strain and superconducting properties in un-doped and glycine-doped MgB2 bulks

Status of the ITER Conductors in China

Variation of MgB2 growth mode and enhancement of critical current density by instantaneously 800 °C-triggered low-temperature sintering