Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Авторы: Liu H
Показаны 1−20 из 135	< предыдущая 1 2 3 ... 7 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Shi Y., Zhang X., Jin H., Chen H., Tan Y., Liu H., Liu F.

Design and Electromechanical Properties of Round HTS Strand With Soldered Multilayer Copper Tapes as Filler and Tube

Ключевые слова: twisting, critical characteristics, critical current, n-value, bending strain, high field magnets, HTS, REBCO, coated conductors, tapes multifilamentary, stacked blocks, cables, strand geometry, wires round, fabrication, milling process, solder, Cu-based conductors, tapes

IEEE Transactions Applied Superconductivity, 2021, v.31, N 1, p.4200104

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Zhang X., Jin H., Chen H., Tan Y., Liu H., Liu F.

Critical Current Characteristics of HTS Round Strand Using REBCO Tapes Under Transverse and Cyclic Load

Ключевые слова: HTS, REBCO, tapes, strands, wires round, cables, twisting, solder, Cu-based conductors, mechanical properties, transverse strain, cycling, loads, measurement setup, critical characteristics, critical current, pressure dependence, experimental results

IEEE Transactions Applied Superconductivity, 2021, v.31, N 1, p.4200305

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Wang Y., Yao H., Zhang X., Ma Y., Wang C., Wang D., Zhang Z., Zhang Z., Liu H., Liu F., Xu Q., Wei S.

First performance test of the iron-based superconducting racetrack coils at 10 T

Ключевые слова: pnictides, tapes multifilamentary, coils racetrack, design parameters, design, fabrication, heat treatment, impregnation, magnetic field distribution, quench current, test results

Superconductor Science Technology, 2021, v.34, N 3, p.35021

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Zhang X., Jin H., Lei L., Tan Y., Liu H., Yu M., Liu F., Guo L.

Quasi-Round HTS Conductor Using REBCO Tapes for Fusion Magnet Application

Ключевые слова: fusion magnets, HTS, REBCO, coated conductors, wires round, stacked blocks, twisting, fabrication, photo, design parameters, bending radius, critical current, critical current, bending strain, experimental results

IEEE Transactions Applied Superconductivity, 2020, v.30, N 1, p.4800104

Полный текст на Sci-Hub

Дополнительная информация

Li Y., Zhao Y., Li Z., Shen B., He D., Zhang H., Liu H., Ma J., Ji X.

Transient Characteristics of YBCO Tapes Under Pulsed Current and Pressures

Ключевые слова: HTS, YBCO, coated conductors, transient performance, pulsed current, pressure dependence, critical characteristics, current-voltage characteristics, resistance, impedance, experimental results

IEEE Transactions Applied Superconductivitycri, 2020, v.30, N 2, p.5600206

Полный текст на Sci-Hub

Дополнительная информация

Li J., Zhang X., Zhang X., Hu Y., Chen B., Liu H., Zhou C., Ma H.

Quench Detection of Bi2223/Ag Insulated Double-Pancake Coil Using Distributed Optic Fiber Sensor

Ключевые слова: HTS, Bi2223/Ag, tapes, coils pancake, design parameters, quench detection, hot spots, quench propagation, measurement technique, fibers, sensors, experimental results

IEEE Transactions Applied Superconductivity, 2020, v.30, N 3, p.4700405

Полный текст на Sci-Hub

Дополнительная информация

Zhang X., Wu Y., Liu H., Liu F., Qin J., Ma H.

Summary of NbTi Strand Performance for ITER PF Conductors in China

Ключевые слова: ITER, coils poloidal field, LTS, NbTi, strands, design parameters, critical current distribution, ac losses, RRR parameter, distribution, critical current, temperature dependence, magnetic field dependence, test results, China

IEEE Transactions Applied Superconductivity, 2020, v.30, N 3, p.8000205

Полный текст на Sci-Hub

Дополнительная информация

Ochiai S., Saito A., Liu H., Baron P., Dupuy E., Larsson R., Manago N., Murtagh D., Oyama S., Sagawa H., Sakazaki T., Shiotani M.*10, Suzuki M.*11

Potential for the measurement of mesosphere and lower thermosphere (MLT) wind, temperature, density and geomagnetic field with Superconducting Submillimeter-Wave Limb-Emission Sounder 2 (SMILES-2)

Ключевые слова: wind farms application, measurement technique, acoustic emission, temperature distributions, experimental results, measurement setup

Atmospheric Measurement Techniques, 2020, v.13, N 1, p.219-237

Полный текст на Sci-Hub

Дополнительная информация

Sun J., Wang Y., Wang L., Wang H., Wang H., Wang Q., Dai Y., Wang D., Hu X., Liu J., Zhang Z., Liu H., Cui C., Qin L., Wang K., Zhou B., Sun W., Xiong W.S.

World record 32.35 tesla direct-current magnetic field generated with an all-superconducting magnet

Ключевые слова: high field magnets, coils outer, LTS, coils insert, HTS, YBCO, GdBCO, coated conductors, insulationless, coils pancake, design parameters, fabrication, magnetic field density, test results

Superconductor Science Technology, 2020, v.33, N 3, p.1

Полный текст на Sci-Hub

Дополнительная информация

Ding H., Wang G., Li L., Tan Y., Liu H., Qin J., Huang Z., He R.

Research and Optimization of Ice Impregnation for YBCO Coils

Ключевые слова: HTS, YBCO, coils, impregnation, ice, fibers, mechanical properties, crack formation, breakdown characteristics, compression, experimental results

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.4601104

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Han H., Li J., Hu Y., Jin H., Wang T., Song J., Wang W., Ma G., Wu Y., Li T., Liu H., Qin J., Jin J., Guo L., Yin D.

Manufacturing Status of CFETR Central Solenoid Model Coil

Ключевые слова: Tokamak, central coils, winding process, heat treatment, joints, joint resistances, LTS, NbTi, Nb3Sn, cable-in-conduit conductor, coils insert, coils outer, impregnation, fabrication, design, design parameters, test results, coils model

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.4201904

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Zhang X., Hong Z., Lei L., Tan Y., Liu H., Liu F., Ma H.

Progress in the Development of a 25 T All Superconducting Magnet With Small-Scale YBCO Insert Coil

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.4600405

Полный текст на Sci-Hub

Дополнительная информация

Qu T., Tan Y., Yan Y., Liu H., Guan M., Xin C.

Screening current effect on the stress and strain distribution in REBCO high-field magnets: experimental verification and numerical analysis

Ключевые слова: high field magnets, LTS, coils outer, HTS, REBCO, coated conductors, coils insert, screening current, shielding effects, mechanical properties, stress distribution, strain effects, distribution, experimental results, numerical analysis, modeling

Superconductor Science Technology, 2020, v.33, N 5, p.2

Полный текст на Sci-Hub

Дополнительная информация

Li Y., Zhu M., Li J., Li W., Zheng R., Liu H., Sun M., Qu J., Cairney J.M.

Carbon Coating Layers on Boron Generated High Critical Current Density in MgB2 Superconductor

Ключевые слова: MgB2, bulk, carbon, coatings, pinning centers, irreversibility fields, doping effect, critical characteristics, Jc/B curves, pinning force, X-ray irradiation, Raman spectroscopy, microstructure, critical temperature

ACS Applied Materials Interfaces, 2020, v.12, N 7, p.8563-8572

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Wang L., Wang Q., Dai Y., Liu J., Liu H., Qin L., Wang K., Zhou B.

Generation of 32.35T with an All-superconducting Magnet at IEECAS

Ключевые слова: high field magnets, LTS, coils outer, HTS, coils insert, insulationless, coils pancake, REBCO, coated conductors, fabrication

EUROPEAN SUPERCONDUCTIVITY NEWS FORUM, 2020, v.14, N 48-2, p.60

Полный текст на Sci-Hub

Дополнительная информация

Li C.S., Wang Q.Y., Feng J.Q., Jin L.H., Xiong X.M., Zhang S.N., Yang F., Liu H.R., Xie Z.W., Zhou ·.L.

Improved superconducting properties in graphene-doped MgB2 bulks prepared by high energy ball milling

Ключевые слова: MgB2, doping effect, graphene, milling process, X-ray diffraction, lattice parameter, density, microstructure, critical characteristics, Jc/B curves, pinning force, fabrication, experimental results

J Materials Science - Materials Electronics, 2020, v.31, N , p.8837-8843

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Lei L., Li T., Liu H., Liu F., Guo L., GUO Q., Ma H.

Manufacture and Performance Test of 3.5 T High Temperature Superconducting Coils for the Magnetic Separation

Ключевые слова: magnetic separation, HTS, YBCO, tapes, coils pancake, impregnation, design parameters, fabrication, test results, magnetic field distribution, joints superconducting , Bi2223/Ag, joint resistances, critical characteristics, current-voltage characteristics, loads, magnetic field distribution

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.3700605

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Zhang X., Ma Y., Wang D., Zhang Z., Zhang Z., Liu H., Liu F., Gong L., Xu Q., Wei S., Tian C., Jiange D.

Fabrication and Test of Diameter 35 mm Iron-Based Superconductor Coils

Ключевые слова: pnictides, tapes multifilamentary, coils pancake, design, design parameters, fabrication, heat treatment, critical characteristics, critical current, winding techniques, impregnation, joints superconducting , YBCO, tapes, quench current, test results

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.4602404

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Li J., Jin H., Chen H., Li C., Liu H., Liu F., Qin J., Zhou C., Dai C.

Critical Current Under Uniaxial Strain on High-Pressure Heat Treatment Bi-2212 Round Wire

Ключевые слова: HTS, Bi2212, wires round, mechanical properties, strain effects, critical characteristics, critical current, heat treatment, high pressure processing, fabrication, PIT process

IEEE Transactions Applied Superconductivity, 2020, v.30, N 4, p.6400304

Полный текст на Sci-Hub

Дополнительная информация

Li J., Hu Y., Wang T., Chen B., Liu H., Zhou C., Ma H.

Distributed optical fiber sensor for investigation of normal zone propagation and hot spot location in REBCO cables

Ключевые слова: measurement setup, measurement technique, sensors, optical imaging, fiber, normal zone propagation, hot spots, Tokamak, central coils, cables, HTS, REBCO, quench detection, nitrogen liquid , experimental results

Fusion Engineering Design, 2020, v.156, N , p.111569

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Авторы: Liu H

Design and Electromechanical Properties of Round HTS Strand With Soldered Multilayer Copper Tapes as Filler and Tube

Critical Current Characteristics of HTS Round Strand Using REBCO Tapes Under Transverse and Cyclic Load

First performance test of the iron-based superconducting racetrack coils at 10 T

Quasi-Round HTS Conductor Using REBCO Tapes for Fusion Magnet Application

Transient Characteristics of YBCO Tapes Under Pulsed Current and Pressures

Quench Detection of Bi2223/Ag Insulated Double-Pancake Coil Using Distributed Optic Fiber Sensor

Summary of NbTi Strand Performance for ITER PF Conductors in China

Potential for the measurement of mesosphere and lower thermosphere (MLT) wind, temperature, density and geomagnetic field with Superconducting Submillimeter-Wave Limb-Emission Sounder 2 (SMILES-2)

World record 32.35 tesla direct-current magnetic field generated with an all-superconducting magnet

Research and Optimization of Ice Impregnation for YBCO Coils

Manufacturing Status of CFETR Central Solenoid Model Coil

Progress in the Development of a 25 T All Superconducting Magnet With Small-Scale YBCO Insert Coil

Screening current effect on the stress and strain distribution in REBCO high-field magnets: experimental verification and numerical analysis

Carbon Coating Layers on Boron Generated High Critical Current Density in MgB2 Superconductor

Generation of 32.35T with an All-superconducting Magnet at IEECAS

Improved superconducting properties in graphene-doped MgB2 bulks prepared by high energy ball milling

Manufacture and Performance Test of 3.5 T High Temperature Superconducting Coils for the Magnetic Separation

Fabrication and Test of Diameter 35 mm Iron-Based Superconductor Coils

Critical Current Under Uniaxial Strain on High-Pressure Heat Treatment Bi-2212 Round Wire

Distributed optical fiber sensor for investigation of normal zone propagation and hot spot location in REBCO cables