Вы запросили

Авторы: Yang X

Показаны 1−20 из 55 < предыдущая 1 2 3 следующая > Показать все
Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Yang X., Song M., Tang X., Hu N., Zeng L., Qiu W., Liang Z.

Polarity Effect on Standard Lightning Impulse Surface Flashover Under Extremely Nonuniform Electric Field in Liquid Nitrogen

Ключевые слова: surface, breakdown characteristics, cryogenic systems, nitrogen liquid , pulsed operation, electric field, discharge characteristics, experimental results

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.5000107

Полный текст на Sci-Hub

Дополнительная информация

Chen Y., Yang X., Cheng D., Xu F., Chen A., Peng Q.

The superconducting magnet for ADS injection-I

Ключевые слова: magnets, accelerator magnets, cryostat, design, coils solenoidal, fabrication, vacuum structure

Radiation Detection Technology Methods, 2019, v.3, N 1, p.19-23

Полный текст на Sci-Hub

Дополнительная информация

Wang S., Zhang Y., Li F., Wu H., Zhao P., Jiang L., Muhammad S., Le X., Xiao Z., Ou X., Ouyang X.

Low-energy (40 keV) proton irradiation of YBa2Cu3O7-x thin films - Micro-Raman characterization and electrical transport properties

Ключевые слова: HTS, YBCO, thin films, films epitaxial, irradiation effects, proton irradiation, Raman spectroscopy, substrate LaAlO3, MOD process, fabrication, X-ray diffraction, lattice parameter, oxygen, composition, resistive transition, magnetic field dependence, experimental results

Chinese Physics B, 2019, v.28, N 2, p.27401

Полный текст на Sci-Hub

Дополнительная информация

Zhang W., Zhang Y., Zhao Y., Yang X., Yu Z., Li P., Pan X., Zou X.

Equiaxial nano-crystals Nb3Al superconductor prepared by optimized mechanically alloying

Ключевые слова: LTS, Nb3Al, fabrication, composition, milling process, sintering, phase formation, microstructure, X-ray diffraction, magnetization, critical temperature, resistivity, temperature dependence, upper critical fields, critical characteristics, Jc/B curves, pinning force

J Materials Research, 2019, v.54, N 6, p.5022-5031

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Yang X., Wang C., Zhang K., Cheng D., Zhang Z., Peng Q., Xu Q., Wei S., Kong E.

Mechanical Design, Assembly, and Test of LPF1 - A 10.2 T Nb3Sn Common-Coil Dipole Magnet With Graded Coil Configuration

Ключевые слова: LTS, Nb3Sn, NbTi, coils racetrack, coils poloidal field, magnets dipole, design, design parameters, mechanical properties, stress effects, strain effects, loads, fabrication, training effect, quench current, accelerator magnets, high field magnets

IEEE Transactions Applied Superconductivity, 2019, v.29, N 4, p.4000108

Полный текст на Sci-Hub

Дополнительная информация

Yan G., Feng Y., Zhang Y., Zhao Y., Yang X., Yu Z., Li P., Ke C., Yang C., Xia L., Pan X.

Improvement of Superconducting Properties by Optimized Post-Heat Treatment for Nb3Al Wires Fabricated by RHQ

Ключевые слова: LTS, Nb3Al, wires, fabrication, RHQT-process, heat treatment, X-ray diffraction, critical characteristics, Jc/B curves, magnetization, temperature dependence, experimental results

IEEE Transactions Applied Superconductivity, 2019, v.19, N 2, p.6000104

Полный текст на Sci-Hub

Дополнительная информация

Zhao Y., Chen W., Yang X.S., Pan X.F., Zhu Y.P., Liu L.Y., Zhang H.Y.

Study of the inhomogeneity of critical current under in-situ tensile stress for YBCO tape

Ключевые слова: HTS, YBCO, coated conductors, mechanical properties, critical characteristics, tensile tests, stress effects, critical current, homogeneity, measurement technique, Hall sensor, local distribution, numerical analysis, modeling, hot spots, minimum quench energy, thermal stability, crack formation, degradation studies, distribution, resistivity

Superconductor Science Technology, 2018, v.31, N 3, p.35007

Полный текст на Sci-Hub

Дополнительная информация

Shi J., Chen W., Yang X., Zhang H., Qiu T., Cryogenics

Effect of the local defects induced by bending strain on the quench properties for YBCO tapes

Ключевые слова: critical current, recovery characteristics, minimum quench energy, experimental results, HTS, YBCO, coated conductors, defects, local distribution, mechanical properties, bending strain, quench properties, thermal stability, homogeneity, critical characteristics, normal zone propagation

Cryogenics, 2018, v.90, N , p.52-55

Полный текст на Sci-Hub

Дополнительная информация

Zhang W., Yan G., Feng Y., Zhang Y., Wang G., Cheng C.H., Zhao Y., Yang X., Yu Z., Li P., Pan X., Lin W., Sun B.

Effect of Joule heating current on phase formation and superconducting properties based on Nb3Al for applications in nuclear fusion magnet energy

Ключевые слова: LTS, Nb3Al, wires, fabrication, phase formation, heat treatment, magnetic properties, critical temperature, microstructure, magnetization curves, critical characteristics, Jc/B curves, experimental results

J Alloys Compounds, 2018, v.742, N , p.130-134

Полный текст на Sci-Hub

Дополнительная информация

Yan G., Feng Y., Zhang Y., Cheng C.H., Zhao Y., Hsieh C.C., Yang X.S., Pan X.F., Ke C., Lin H.T., Chen Y.L., Li P.Y.

Superconducting Properties and Crystalline Structure of High-Performance Nb3Al Wires Fabricated by RHQ and Mechanical Alloying Methods

Ключевые слова: LTS, Nb3Al, RHQT-process, alloying effects, fabrication, wires, quenching, PIT process, comparison, X-ray diffraction, lattice parameter, composition, demagnetization, temperature dependence, critical characteristics, Jc/B curves, transport currents, experimental results

IEEE Transactions Applied Superconductivity, 2018, v.28, N 3, p.6000805

Полный текст на Sci-Hub

Дополнительная информация

Shi J., Liu L., Zhao Y., Chen W., Chen Y., Yang X., Zhang H.

Fatigue Behavior of Critical Current Degradation for YBCO Tapes at 77 K

Ключевые слова: HTS, YBCO, IBAD process, MOCVD process, coated conductors, degradation studies, critical characteristics, mechanical properties, fatigue behavior, measurement setup, tensile tests, stress effects, critical current, loads, cycling, n-value, magnetic field dependence, experimental results

IEEE Transactions Applied Superconductivity, 2018, v.28, N 3, p.8400905

Полный текст на Sci-Hub

Дополнительная информация

Zhang W., Yan G., Zhang Y., Zhao Y., Yang X., Yu Z., Li P., Zheng L., Pan X., Lin W.

Preparation of Nb3Al Superconducting Tapes by a Powder-in-Tube Method Combined with Hot-Pressed Sintering

Ключевые слова: magnetization, composition, magnetization curves, critical characteristics, Jc/B curves, microstructure, pinning force, experimental results, LTS, Nb3Al, tapes, fabrication, PIT process, hot pressing, sintering, X-ray diffraction

J Superconductivity Novel Magnetism, 2018, v.31, N 7, p.2027-2032

Полный текст на Sci-Hub

Дополнительная информация

Zhang Y., Shi J., Liu L., Zhao Y., Chen W., Chen Y., Yang X., Zhang H.

Quench Characteristics Comparison Between Solid Nitrogen and Conduction Cooled REBCO Coil Under qverand Over Current Pulse

Ключевые слова: HTS, YBCO, coated conductors, coils, conduction cooled systems, nitrogen solid, cryogenic systems, comparison, quench, overcurrent, pulsed operation, thermal stability, experimental results, minimum quench energy, mechanical properties, strain effects

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.4603705

Полный текст на Sci-Hub

Дополнительная информация

Zhang Y., Zhao Y., Chen W., Chen Y., Yang X., Zhang H.

Impact of fatigue loading on the critical current of Bi-2223 tapes under background magnetic field

Ключевые слова: critical characteristics, critical current, magnetic field dependence, mechanical properties, fatigue behavior, cycling, measurement setup, tensile tests, stress effects, strain effects, experimental results, HTS, Bi2223, tapes

Cryogenics, 2018, v.94, N , p.1-4

Полный текст на Sci-Hub

Дополнительная информация

Liu L., Zhao Y., Yang X., Wang W.T., Xia Y.D., Wang M.J., Scurti F., Huo B.L.

Effects of chemical etching on structure and properties of Y0.5Gd0.5Ba2Cu3O7-z coated conductors

Ключевые слова: HTS, YGdBCO, coated conductors, joints, surface, electrochemical process, critical characteristics, current-voltage characteristics, microstructure, Raman spectroscopy, experimental results

Ceramics International, 2018, v.44, N 13, p.15572-15578

Полный текст на Sci-Hub

Дополнительная информация

Li C.S., Zhao Y., Chen W., Wu Y., Yang X.S., Hao Q.B., Li J.G., Qin J.G.

Non-destructive evaluation of critical current on a Bi-2212 first stage cable based on numerical analysis of the remnant field distributions

Ключевые слова: HTS, Bi2212, wires round, cables, measurement technique, critical characteristics, numerical analysis, remanent field, distribution, Hall sensor

Superconductor Science Technology, 2018, v.31, N 12, p.125018

Полный текст на Sci-Hub

Дополнительная информация

Liu L., Zhao Y., Chen W., Chen Y., Yang X., Xu M., Zhang H., Pan X.

Quench Behavior Comparison Between Solid Nitrogen and Conduction Cooled REBCO Coated Conductor

Ключевые слова: REBCO, HTS, coated conductors, quench properties, cryogenic systems, nitrogen solid, conduction cooled systems, comparison, minimum quench energy, normal zone propagation, thermal stability, experimental results

IEEE Transactions Applied Superconductivity, 2018, v.28, N 8, p.6602905

Полный текст на Sci-Hub

Дополнительная информация

Liu L., Zhao Y., Chen W., Yang X., Li C., Zhang H., Hao Q.

Experimental and Numerical Analysis of Equivalent Elastic Properties for Bi-2212 and YBCO Conductors

Ключевые слова: HTS, Bi2212, tapes, YBCO, coated conductors, comparison, mechanical properties, elastic behavior, numerical analysis, experimental results, tensile tests, stress effects, strain effects

J Superconductivity Novel Magnetism, 2017, v.30, N 4, p.885-891

Полный текст на Sci-Hub

Дополнительная информация

Li X., Wang X., Xu B., Yang X., He Y.

Investigation on stresses of superconductors under pulsed magnetic fields based on multiphysics model

Ключевые слова: cylinders, pulsed magnetization, mechanical properties, stress effects, modeling, magnetic field distribution, temperature distributions, stress distribution, numerical analysis, REBCO, bulk

Physica C, 2017, v.535, N , p.1-8

Полный текст на Sci-Hub

Дополнительная информация

Yang X., Wang T., Cheng D., Xu F., Peng Q., Wei X.

Design, modification and test of the conduction cooled high-current current leads for the superconducting magnet

Ключевые слова: magnets, current leads, conduction cooled systems, design, test results, Cu-based conductors, numerical analysis, fabrication

Cryogenics, 2017, v.86, N , p.80-86

Полный текст на Sci-Hub

Дополнительная информация

Главная | Новости | Бюллетень | Конференции | Поиск публикаций в базе данных | Новое в базе данных
Российские организации | Энциклопедия | Цели сайта | Контакты | Полезные ссылки | Карта сайта | Помощь

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.