Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: flux density
Показаны 1−20 из 365	< предыдущая 1 2 3 ... 19 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Grilli F., Stepien M., Kario A., Zermeno V.M., Godfrin A., Kubiczek K., Kampik M.

Length Uniformity of the Angular Dependences of Ic and n of Commercial REBCO Tapes with Artificial Pinning at 77 K

Ключевые слова: HTS, commercialization, REBCO, coated conductors, pinning centers artificial, uniformity, angular dependence, critical characteristics, critical current, n-value, flux density, distribution, experimental results, length

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.8000309

Полный текст на Sci-Hub

Дополнительная информация

Noe M., Grilli F., Liu Y., Zhang M., Zermeno V.M., Schreiner F., Ou J.

Comparison of 2D simulation models to estimate the critical current of a coated superconducting coil

Ключевые слова: HTS, GdBCO, coated conductors, coils pancake, coils racetrack, design parameters, modeling, critical characteristics, critical current, n-value, flux density, current-voltage characteristics, angular dependence, numerical analysis, experimental results, magnetic field distribution, comparison

Superconductor Science Technology, 2019, v.32, N 1, p.14001

Полный текст на Sci-Hub

Дополнительная информация

Grilli F., Coombs T., Shen B.

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission

Ключевые слова: power equipment, power transmission lines, HTS, stacked blocks, coated conductors, cables three-phase, ac losses, modeling, numerical analysis, transport currents, flux density, distribution, current distribution

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.5900205

Полный текст на Sci-Hub

Дополнительная информация

Fang J., Chen Z., Dai S., Geng G.

Design and Characteristics Analysis of a New High-Temperature Superconducting Composite Conductor

Ключевые слова: HTS, YBCO, coated conductors, CORC cables, current density, flux density, distribution, SMES, ac losses, modeling, numerical analysis, design

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.6900105

Полный текст на Sci-Hub

Дополнительная информация

Marchiori E., Bending S.J.

Mapping the flux penetration profile in a 2G-HTS tape at the microscopic scale - deviations from a classical critical state model

Ключевые слова: HTS, coated conductors, flux density, penetration depth, microstructure, critical state model, resistive transition, critical characteristics, critical current density, temperature dependence, magnetization, hysteresis, Hall sensor, distribution

Superconductor Science Technology, 2019, v.32, N 2, p.25009

Полный текст на Sci-Hub

Дополнительная информация

Takahashi K., Cardwell D.A., Fujishiro H., Durrell J.H., Ainslie M.D., Huang K.Y., Namba S., Chaddock J.

Numerical modelling of mechanical stresses in bulk superconductor magnets with and without mechanical reinforcement

Ключевые слова: HTS, GdBCO, critical characteristics, Jc/B curves, temperature dependence, bulk, magnets, reinforcement, trapped field, modeling, numerical analysis, flux density, distribution, current density, mechanical properties, stress effects, stress distribution, temperature distributions

Superconductor Science Technology, 2019, v.32, N 3, p.34002

Полный текст на Sci-Hub

Дополнительная информация

Gu C., Wang L., Zhu Y., Yang Z., Qu T., Feng F., Cheng X., Lu H., Feng B.

Investigations on the lead acetate addition in precursor solutions for YBCO superconducting film deposition

Ключевые слова: HTS, YBCO, precursors, chemical solution deposition, fabrication, substrate LaAlO3, thin films, flux density, microstructure

Surface Coatings Technology, 2019, v.358, N , p.1017-1021

Полный текст на Sci-Hub

Дополнительная информация

Cure B., Gaddi A., Gerwig H., Herve A., Klyukhin V., Amapane N., Ball A., Mulders M., Loveless R.

Using the Standard Linear Ramps of the CMS Superconducting Magnet for Measuring the Magnetic Flux Density in the Steel Flux-Return Yoke

Ключевые слова: coils solenoidal, large-scale applications, measurement technique, magnetic properties, iron yoke, modeling, discharge characteristics, flux density, distribution

IEEE Transactions on Magnetics, 2019, v.55, N 2, p.8300504

Полный текст на Sci-Hub

Дополнительная информация

Glowacki B.A., Reis T., Patel A., Baskys A., Climente-Alarcon V.

Design considerations for fully superconducting synchronous motors aimed at future electric aircraft

Ключевые слова: rotating machines, motors, aviation application, propulsion system, HTS, ac losses, stators, rotors, design, review, Bi2223, MgB2, REBCO, coils, flux density, distribution

IEEE International Conference Electrical Systems Aircraft Railway Ship Propulsion Road Vehicles, 2019, v., N , p.1-6

Полный текст на Sci-Hub

Дополнительная информация

Kumar A., Jeyan J.V., Agarwal A.

Numerical analysis on 10 MJ solenoidal high temperature superconducting magnetic energy storage system to evaluate magnetic flux and Lorentz force distribution

Ключевые слова: SMES, HTS, YBCO, coated conductors, coils solenoidal, numerical analysis, design parameters, flux density, distribution, aspect ratios

Physica C, 2019, v.558, N , p.17-24

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Wang S., Zhu J., Liu C., Guo Y., Lei G.

Comparative Study of Linear Superconductivity Machine With Different Stator and Winding Configurations

Ключевые слова: rotating machines, magnets, stators, winding configurations, comparison, design parameters, flux density, distribution, magnetic force, numerical analysis

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.3600504

Полный текст на Sci-Hub

Дополнительная информация

Hekmati A., Fardmanesh M., Ahmad Moradnouri, Mehdi Vakilian

HTS Transformer Windings Design Using Distributive Ratios for Minimization of Short Circuit Forces

Ключевые слова: power equipment, transformers three-phase, HTS, design, design parameters, winding configurations, electromagnetic force, modeling, numerical analysis, flux density, distribution

J Superconductivity Novel Magnetism, 2019, v.32, N 2, p.151-158

Полный текст на Sci-Hub

Дополнительная информация

Zhang G., Liu G., Jing L.

Experimental and numerical study of the frequency-dependent transport ac losses of the YBa2Cu3O7-d coil with and without flux diverters

Ключевые слова: HTS, YBCO, coated conductors, coils pancake, ac losses, experimental results, numerical analysis, design parameters, divertor, frequency dependence, flux density, distribution

Superconductor Science Technology, 2019, v.32, N 5, p.55002

Полный текст на Sci-Hub

Дополнительная информация

Mousavi S.M., Rajabi M.

Thermal performance improvement of magnetic-shield superconducting fault current Limiter, by using heat-sink in its structure

Ключевые слова: power equipment, FCL inductive, magnetic shielding, thermal performance, flux density, distribution, heat transfer, temperature distributions, design, modeling

Physica C, 2019, v.556, N , p.30-35

Полный текст на Sci-Hub

Дополнительная информация

Li X., Wang Y., Wang X., Ma W.

A HTS-Excitation Modular Flux-Switching Linear Machine With Static Seals

Ключевые слова: rotating machines, HTS, Bi2223, stators, excitation system, design, modeling, operational performance, electromotive force, design parameters, flux density, displacements, coils, inductance, numerical analysis

IEEE Access, 2019, v.7, N , p.32009-32018

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Liu M., Yuan X., Chen H., Wang T., Peng C., Kan C.

Magnetization AC Losses of Quasi-Isotropic Strand Stacked by 2G Wires at 77 K

Ключевые слова: HTS, coated conductors, REBCO, stacked blocks, ac losses, experimental results, numerical analysis, flux density, distribution, frequency dependence, nitrogen liquid

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.8200605

Полный текст на Sci-Hub

Дополнительная информация

Ogawa J., Nakamura T., Fukui S., Sato T., Yokoyama K., Oka T., Shimizu K., Takeda A., Higa K., Tsunoda S.

Feasible Applications of Bulk HTS Magnets and Magnetic Field-Capturing Characteristics in Their Activation Processes

Ключевые слова: HTS, bulk, magnets, pulsed magnetization, trapped field, uniformity, penetration depth, flux density, distribution, experimental results

IEEE Transactions Applied Superconductivity, 2019, v.29, N 3, p.6800706

Полный текст на Sci-Hub

Дополнительная информация

Shi Y., Cardwell D.A., Vanderbemden P., Fagnard J., Vanderheyden B., Wera L., Hogan K., Namburi D.K.

Magnetic Shielding of Open and Semi-closed Bulk Superconductor Tubes - The Role of a Cap

Ключевые слова: magnetic shielding, tubes, design parameters, disks, HTS, bulk, Bi2223, YBCO, comparison, fabrication, flux density, distribution, experimental results, numerical analysis

IEEE Transactions Applied Superconductivity, 2019, v.29, N 3, p.6801109

Полный текст на Sci-Hub

Дополнительная информация

Glowacki B.A.

Advances in Development of Powder-in-Tube Nb3Sn, Bi-Based, and MgB2 Superconducting Conductors

Ключевые слова: fabrication, PIT process, LTS, Nb3Sn, MgB2, HTS, Bi2212, cryogenic systems, hydrogen liquid, microstructure, critical characteristics, critical current, flux density, Jc/B curves, experimental results

Acta Physica Polonica A, 2019, v.135, N 1, p.7-13

Полный текст на Sci-Hub

Дополнительная информация

Yokoyama K., Oka T., Miura A., Katsuki A.

Magnetizing Performance Evaluation of HTS Bulk Magnet Using a 12 K Refrigerator With High Cooling Capacity

Ключевые слова: HTS, GdBCO, bulk, magnets, design parameters, cryogenic systems, refrigerator, cooling technology, capacity, pulsed magnetization, magnetic field distribution, cooling technology, flux density, experimental results

IEEE Transactions Applied Superconductivity, 2019, v.29, N 3, p.8800506

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: flux density

Length Uniformity of the Angular Dependences of Ic and n of Commercial REBCO Tapes with Artificial Pinning at 77 K

Comparison of 2D simulation models to estimate the critical current of a coated superconducting coil

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission

Design and Characteristics Analysis of a New High-Temperature Superconducting Composite Conductor

Mapping the flux penetration profile in a 2G-HTS tape at the microscopic scale - deviations from a classical critical state model

Numerical modelling of mechanical stresses in bulk superconductor magnets with and without mechanical reinforcement

Investigations on the lead acetate addition in precursor solutions for YBCO superconducting film deposition

Using the Standard Linear Ramps of the CMS Superconducting Magnet for Measuring the Magnetic Flux Density in the Steel Flux-Return Yoke

Design considerations for fully superconducting synchronous motors aimed at future electric aircraft

Numerical analysis on 10 MJ solenoidal high temperature superconducting magnetic energy storage system to evaluate magnetic flux and Lorentz force distribution

Comparative Study of Linear Superconductivity Machine With Different Stator and Winding Configurations

HTS Transformer Windings Design Using Distributive Ratios for Minimization of Short Circuit Forces

Experimental and numerical study of the frequency-dependent transport ac losses of the YBa2Cu3O7-d coil with and without flux diverters

Thermal performance improvement of magnetic-shield superconducting fault current Limiter, by using heat-sink in its structure

A HTS-Excitation Modular Flux-Switching Linear Machine With Static Seals

Magnetization AC Losses of Quasi-Isotropic Strand Stacked by 2G Wires at 77 K

Feasible Applications of Bulk HTS Magnets and Magnetic Field-Capturing Characteristics in Their Activation Processes

Magnetic Shielding of Open and Semi-closed Bulk Superconductor Tubes - The Role of a Cap

Advances in Development of Powder-in-Tube Nb3Sn, Bi-Based, and MgB2 Superconducting Conductors

Magnetizing Performance Evaluation of HTS Bulk Magnet Using a 12 K Refrigerator With High Cooling Capacity