Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: geometry effects
Показаны 1−20 из 296	< предыдущая 1 2 3 ... 15 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Li Y., Wang L., Wang Q.

Electromagnetic Design of HTS Insert for Ultrahigh Field NMR Magnet

Ключевые слова: NMR magnet, high field magnets, HTS, YBCO, coated conductors, coils insert, design, homogeneity, screening current, modeling, geometry effects

IEEE Transactions Applied Superconductivity, 2018, v.28, N 3, p.4602105

Полный текст на Sci-Hub

Дополнительная информация

Mulder T., Weiss J., Laan D.v., Dhalle M., Kate H.t.

Development of ReBCO-CORC Wires With Current Densities of 400–600 A/mm 2 at 10 T and 4.2 K

Ключевые слова: HTS, coated conductors, CORC cables, critical characteristics, fabrication, Rare Earth-BCO, Jc/B curves, current-voltage characteristics, loads, cycling, geometry effects, test results

IEEE Transactions Applied Superconductivity, 2018, v.28, N 3, p.4800504

Полный текст на Sci-Hub

Дополнительная информация

Ta W., Shao T., Gao Y.

Comparison study of cable geometries and superconducting tape layouts for high-temperature superconductor cables

Ключевые слова: HTS, cables, geometry effects, Rare Earth-BCO, coated conductors, ac losses, comparison, stacked blocks, numerical analysis, modeling, magnetic field distribution, critical characteristics, critical current density, distribution, critical current, magnetic field dependence

Cryogenics, 2018, v.91, N , p.96-102

Полный текст на Sci-Hub

Дополнительная информация

Ahn M.C., Yang H., Kim K., Jang J.Y., Lee S., Hahn S.

Optimal Design Methodology of Multiwidth HTS Magnet for Minimum Wire Consumption

Ключевые слова: HTS, magnets, GdBCO, coils pancake, coated conductors, tapes, width, design, geometry effects, winding configurations, critical characteristics, critical current, magnetic field dependence, modeling, numerical analysis

IEEE Transactions Applied Superconductivity, 2018, v.28, N 3, p.4602905

Полный текст на Sci-Hub

Дополнительная информация

Sogabe Y., Jiang Z., Wimbush S.C., Strickl N.M., Staines M., Long N.J., Amemiya N.

AC Loss Characteristics in REBCO Coil Assemblies With Different Geometries and Conductors

Ключевые слова: HTS, YBCO, GdBCO, coated conductors, coils pancake, stacked blocks, geometry effects, ac losses, distribution, numerical analysis, experimental results, critical characteristics, critical current density, angular dependence, n-value, fabrication, design parameters, current-voltage characteristics

IEEE Transactions Applied Superconductivity, 2018, v.28, N 3, p.4700105

Полный текст на Sci-Hub

Дополнительная информация

Karaboga F., Yetis H., Akdogan M., Beleni I.

Monofilamentary In Situ Fe/MgB2 Superconducting Wires Fabricated by Pellet-in-Tube Method

Ключевые слова: coils solenoidal, experimental results, MgB2/Fe, in-situ process, PIT process, fabrication, wires monofilamentary, sintering, resistive transition, X-ray diffraction, phase composition, critical characteristics, Jc/B curves, microstructure, critical temperature, geometry effects

J Superconductivity Novel Magnetism, 2018, v.31, N 5, p.1359-1367

Полный текст на Sci-Hub

Дополнительная информация

Huang C., Zhou Y.

Mechanical improvement of metal reinforcement rings for a finite ring-shaped superconducting bulk

Ключевые слова: bulk, rings, reinforcement, mechanical properties, numerical analysis, magnetostriction, fracture behavior, crack formation, modeling, stress effects, stress distribution, tensile tests, geometry effects

AIP Advances, 2018, v.8, N 3, p.35025

Полный текст на Sci-Hub

Дополнительная информация

Nugteren J.v., Wolf F., Murtomaki J.S., Kirby G., Rijk G.d., Kate H.t., Rossi L.

Idealized Coil Cross Sections With Minimized Conductor Area for High Field Dipoles

Ключевые слова: accelerator magnets, magnets dipole, high field magnets, coils, Rutherford cables, design, design parameters, geometry effects, modeling, numerical analysis

IEEE Transactions Applied Superconductivity, 2018, v.28, N 3, p.4901505

Полный текст на Sci-Hub

Дополнительная информация

Budinger T.F., Bird M.D.

MRI and MRS of the human brain at magnetic fields of 14 T to 20 T - Technical feasibility, safety, and neuroscience horizons

Ключевые слова: MRI magnets, LTS, Nb3Sn, NbTi, HTS, geometry effects, YBCO, Bi2212, Bi2223, review, high field magnets, medical applications

NeuroImage, 2018, v.168, N , p.509-531

Полный текст на Sci-Hub

Дополнительная информация

Kar S., Luo W., Selvamanickam V.

Ultra-small Diameter Round REBCO Wire with Robust Mechanical Properties

Ключевые слова: HTS, Rare Earth-BCO, coated conductors, CORC cables, geometry effects, mechanical properties, bending radius, bending strain, flexibility, critical characteristics, substrate Hastelloy, current-voltage characteristics

EUROPEAN SUPERCONDUCTIVITY NEWS FORUM, 2017, v.39, N 1, p.547-4

Полный текст на Sci-Hub

Дополнительная информация

Pitel J.

On one selected problem in mathematical modeling of superconducting cylindrical coils in case of using the Ic(B) characteristic linearized in parts

Ключевые слова: coils solenoidal, magnetic field distribution, homogeneity, MgB2/Ni, wires multifilamentary, critical characteristics, current-voltage characteristics, geometry effects, modeling, numerical analysis

Cryogenics, 2017, v.81, N 1, p.33-41

Полный текст на Sci-Hub

Дополнительная информация

Suwa T., Saito T., Takahashi Y., Oshikiri M., Tsutsumi F., Isono T., Nunoya Y.

The Effect of Indentation Depth on Performances of Nb3Sn Strands in Cables of ITER Central Solenoid

Ключевые слова: ITER, central coils, LTS, Nb3Sn, strands, cable-in-conduit conductor, geometry effects, bronze process, internal tin method, comparison, experimental results, RRR parameter, critical characteristics, critical current, degradation studies, microstructure, defects

IEEE Transactions Applied Superconductivity, 2017, v.27, N 4-2, p.4201505

Полный текст на Sci-Hub

Дополнительная информация

Chen P., Trociewitz U.P., Lu J., Bosque E.S., Jiang J., Hellstrom E.E., Larbalestier D.C.

Experimental Study of Potential Heat Treatment Issues of Large Bi-2212 Coils

Ключевые слова: high field magnets, NMR magnet, HTS, Bi2212, wires round, coils insert, heat treatment, experimental results, geometry effects, design parameters, critical current distribution, temperature distributions

IEEE Transactions Applied Superconductivity, 2017, v.27, N 4-2, p.4601405

Полный текст на Sci-Hub

Дополнительная информация

Elahi A.S., Ghoranneviss M., Mahdavipour B.

Electromagnetic flux density simulation for the circular and D-shaped cross section superconducting tokamaks

Ключевые слова: Tokamak, coils D-shaped, geometry effects, flux density, distribution, numerical analysis, coils toroidal, core air, core iron

International J Hydrogen Energy, 2017, v.42, N 1, p.46-59

Полный текст на Sci-Hub

Дополнительная информация

Liu D., Polinder H., Abrahamsen A.B., Stehouwer E., Hendriks B., Magnusson N.

Optimization and comparison of superconducting generator topologies for a 10 MW wind turbine application

Ключевые слова: wind farms application, rotating machines, generators, MgB2, design parameters, modeling, geometry effects, numerical analysis, flux density, current density, torque, cost estimate, comparison

International J Applied Electromagnetics Mechanics, 2017, v.53, N , p.191-202

Полный текст на Sci-Hub

Дополнительная информация

Zhong Z., Chudy M., Ruiz H.S., Zhang X., Coombs T.

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: geometry effects

Electromagnetic Design of HTS Insert for Ultrahigh Field NMR Magnet

Development of ReBCO-CORC Wires With Current Densities of 400–600 A/mm 2 at 10 T and 4.2 K

Comparison study of cable geometries and superconducting tape layouts for high-temperature superconductor cables

Optimal Design Methodology of Multiwidth HTS Magnet for Minimum Wire Consumption

AC Loss Characteristics in REBCO Coil Assemblies With Different Geometries and Conductors

Monofilamentary In Situ Fe/MgB2 Superconducting Wires Fabricated by Pellet-in-Tube Method

Mechanical improvement of metal reinforcement rings for a finite ring-shaped superconducting bulk

Idealized Coil Cross Sections With Minimized Conductor Area for High Field Dipoles

MRI and MRS of the human brain at magnetic fields of 14 T to 20 T - Technical feasibility, safety, and neuroscience horizons

Ultra-small Diameter Round REBCO Wire with Robust Mechanical Properties

On one selected problem in mathematical modeling of superconducting cylindrical coils in case of using the Ic(B) characteristic linearized in parts

The Effect of Indentation Depth on Performances of Nb3Sn Strands in Cables of ITER Central Solenoid

Experimental Study of Potential Heat Treatment Issues of Large Bi-2212 Coils

Electromagnetic flux density simulation for the circular and D-shaped cross section superconducting tokamaks

Optimization and comparison of superconducting generator topologies for a 10 MW wind turbine application

Critical current studies of a HTS rectangular coil

Design Study of Large-Scale HTS Linear Generators for Wave Energy Conversion

Hi-Lumi LHC Twin-Aperture Orbit Correctors Magnet System Optimisation

Investigation of AC losses in horizontally parallel HTS tapes

Optimization of Nb3Sn Rutherford Cables Geometry for the High-Luminosity LHC