Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: transformers three-phase
Показаны 1−20 из 45	< предыдущая 1 2 3 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Hekmati A., Vakilian M., Fardmanesh M., Moradnouri A.

Optimal Design of Flux Diverter Using Genetic Algorithm for Axial Short Circuit Force Reduction in HTS Transformers

Ключевые слова: power equipment, transformers three-phase, HTS, REBCO, coated conductors, tapes, design, design parameters, divertor, modeling, numerical analysis, short circuit test, flux density, distribution

IEEE Transactions Applied Superconductivity, 2020, v.30, N 1, p.5500108

Полный текст на Sci-Hub

Дополнительная информация

Hekmati A., Vakilian M., Fardmanesh M., Moradnouri A.

HTS transformers leakage flux and short circuit force mitigation through optimal design of auxiliary windings

Ключевые слова: HTS, winding configurations, transformers three-phase, modeling, design, design parameters, flux density, distribution, short circuit test, numerical analysis

Cryogenics, 2020, v.110, N , p.103148

Полный текст на Sci-Hub

Дополнительная информация

Wang H., Li Y., Wang J., Yang Q., Hu M., Yuan D.

Electromagnetic Characteristic Calculation of Several Parallel Coils for High Current Transformer Based on Field-Circuit Coupling Method

Ключевые слова: modeling, numerical analysis, transformers three-phase, conventional systems

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.5501205

Полный текст на Sci-Hub

Дополнительная информация

Hekmati A., Fardmanesh M., Ahmad Moradnouri, Mehdi Vakilian

HTS Transformer Windings Design Using Distributive Ratios for Minimization of Short Circuit Forces

Ключевые слова: power equipment, transformers three-phase, HTS, design, design parameters, winding configurations, electromagnetic force, modeling, numerical analysis, flux density, distribution

J Superconductivity Novel Magnetism, 2019, v.32, N 2, p.151-158

Полный текст на Sci-Hub

Дополнительная информация

Hekmati A., Vakilian M., Fardmanesh M., Moradnouri A.

The Impact of Multilayered Flux Diverters on Critical Current in HTS Transformer Windings

Ключевые слова: power equipment, transformers three-phase, HTS, REBCO, coated conductors, tapes, design, design parameters, divertor, multilayered structures, modeling, numerical analysis, critical characteristics, critical current, winding configurations, flux density, distribution

Iranian Conference Electrical Engineering, 2019, v., N , p.481-485

Полный текст на Sci-Hub

Дополнительная информация

Amemiya N., Jiang Z., Fang J., Zhang X., Song W., Staines M., Badcock R.A., Sogabe Y.

AC loss simulation in a HTS 3-Phase 1 MVA transformer using H formulation

Ключевые слова: power equipment, transformers three-phase, design parameters, ac losses, HTS, YBCO, coated conductors, Roebel conductors, coils, numerical analysis, flux density, distribution, current density, modeling, power losses

Cryogenics, 2018, v.94, N , p.14-21

Полный текст на Sci-Hub

Дополнительная информация

Pardo E., Badcock R., Staines M., Glasson N., Buckley R., Pannu M., Allpress N., *3 Tanchon J.

Test Results and Conclusions From a 1 MVA Superconducting Transformer Featuring 2G HTS Roebel Cable

Ключевые слова: power equipment, transformers three-phase, HTS, REBCO, coated conductors, Roebel conductors, test results, cryogenic systems, nitrogen sub-cooled, ac losses, cooling technology

IEEE Transactions Applied Superconductivity, 2017, v.27, N 4-2, p.5500205

Полный текст на Sci-Hub

Дополнительная информация

Amemiya N., Kilic A., Gencer A., Yanmaz E., Kosa J., Safran S., Ertekin E., Gecer S., Kilicarslan E.S.

Test of 6-kVA Three-Phase Flux Transfer-Type Current-Limiting Transformer

Ключевые слова: power equipment, transformer current limiting, winding configurations, Cu-based conductors, core iron, transformers three-phase, test results, current limiting characteristics, HTS, YBCO, coated conductors, design, design parameters

J Superconductivity Novel Magnetism, 2017, v.30, N 12, p.3549-3553

Полный текст на Sci-Hub

Дополнительная информация

Yang J., Chen L., Chen H., He H.

Development of a Voltage Compensation Type Active SFCL and Its Application for Transient Performance Enhancement of a PMSG-Based Wind Turbine System

Ключевые слова: wind farms application, FCL, transformers three-phase, core air, converters, fabrication, prototype, HTS, Bi2223, tapes, coils solenoidal, test results, current limiting characteristics, turbine

Advanced Condensed Matter Physics, 2017, v.2017, N , p.9635219

Полный текст на Sci-Hub

Дополнительная информация

Staines M., Jin Z., Lapthorn A.

The Dielectric Strength of Nomex 410 Paper in Liquid Nitrogen Under Boiling Situations

Ключевые слова: insulating medium, cryogenic materials, dielectric properties, nitrogen liquid , boiling, breakdown characteristics, ac performance, modeling, transformers three-phase, HTS, winding configurations, experimental results

IEEE Transactions Applied Superconductivity, 2017, v.27, N 7, p.5500710

Полный текст на Sci-Hub

Дополнительная информация

Teng Y., Hu L., Zhu Z., Dai S., Ma T., Qu Q.

Development of a 1250-kVA Superconducting Transformer and Its Demonstration at the Superconducting Substation

Ключевые слова: power equipment, transformers three-phase, design, fabrication, substation, test results, HTS, Bi2223/Ag, coils solenoidal, coils pancake

IEEE Transactions Applied Superconductivity, 2016, v.21, N 1, p.5500107

Полный текст на Sci-Hub

Дополнительная информация

Heydari H., Daneshmand S.V.

A Diversified Multiobjective Simulated Annealing and Genetic Algorithm for Optimizing a Three-Phase HTS Transformer

Ключевые слова: HTS, transformers, transformers three-phase, design, modeling, design parameters, Bi2223, magnetization, numerical analysis, ac losses

IEEE Transactions Applied Superconductivity, 2016, v.26, N 2, p.5500210

Полный текст на Sci-Hub

Дополнительная информация

Teng Y., Hu L., Zhu Z., Dai S., Qiu Q., Ma T.

Development of a 1250-kVA Superconducting Transformer and Its Demonstration at the Superconducting Substation

Ключевые слова: power equipment, transformers three-phase, design parameters, substation, HTS, Bi2223/Ag, tapes, design, fabrication, winding configurations, cryogenic systems, cryostat, test results, insulation

IEEE Transactions Applied Superconductivity, 2016, v.26, N 1, p.5500107

Полный текст на Sci-Hub

Дополнительная информация

Hu L., Wang Z., Zhu Z., Dai S., Zhang G., Qiu Q., Ma T.

Winding Design and Electromagnetic Analysis for a 1250 kVA HTS Transformer

Ключевые слова: power equipment, transformers three-phase, winding configurations, HTS, design, design parameters, coils solenoidal, coils pancake, Bi2223/Ag, critical characteristics, current distribution, current-voltage characteristics, modeling, test results

IEEE Transactions Applied Superconductivity, 2015, v.25, N 1, p.5500107

Полный текст на Sci-Hub

Дополнительная информация

Ohki Y.

Development of a Three-Phase Superconducting Power Transformer

Ключевые слова: power equipment, transformers three-phase, HTS, coated conductors, YBCO, design parameters, fabrication

IEEE Electrical Insulation Magazine, 2015, v.31, N 3, p.46

Полный текст на Sci-Hub

Дополнительная информация

Jiang Z., Pardo E., Staines M., Glasson N.

Ac loss modelling and measurement of superconducting transformers with coated-conductor Roebel-cable in low-voltage winding

Superconductor Science Technology, 2015, v.28, N 11, p.114008

Полный текст на Sci-Hub

Дополнительная информация

Jin J.X., Chen X.Y., Tang C.L., Zhu Y.P., Sun R.M.

Critical Current and Cooling Favored Structure Design and Electromagnetic Analysis of 1 MVA HTS Power Transformer

Ключевые слова: power equipment, design, cooling technology, critical characteristics, HTS, DI-Bi2223, transformers three-phase, ac losses, core iron, design parameters, winding configurations, critical current distribution

IEEE Transactions Applied Superconductivity, 2014, v.24, N 5, p.5500405

Полный текст на Sci-Hub

Дополнительная информация

Jiang Z., Staines M.P., Glasson N.D., Allpress N.S.

Verification Testing for a 1 MVA 3-Phase Demonstration Transformer Using 2G-HTS Roebel Cable

Ключевые слова: power equipment, transformers three-phase, HTS, YBCO, coated conductors, Roebel conductors, test results, design parameters, fabrication, cryogenic systems, cryostat, ac losses

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.5500206

Полный текст на Sci-Hub

Дополнительная информация

Sato K., Shirai Y., Kobayashi S., Baba J., Noda S., Hattori K., Yamabe K.

Current limiting performance test of 3-phase tri-axial transformer-type SFCL with re-wound structure at 3-line-to-ground fault in lab-scale transmission system

Ключевые слова: power equipment, FCL inductive, HTS, DI-Bi2223, current limiting characteristics, transformers three-phase, model small-scale, impedance, fault currents, test results

Physica C, 2013, v.484, N 1, p.248-252

Полный текст на Sci-Hub

Дополнительная информация

Choi H.S., Chung D.C., Cho Y.S., Jung B.I., Park H.M.

Comparison of the quench and fault current limiting characteristics of the flux-coupling type SFCL with single and three-phase transformer

Ключевые слова: power equipment, FCL inductive, transformers single phase, transformers three-phase, quench, fault currents, current limiting characteristics, modeling, numerical analysis, hybrid systems

Physica C, 2013, v.484, N 1, p.258-262

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: transformers three-phase

Optimal Design of Flux Diverter Using Genetic Algorithm for Axial Short Circuit Force Reduction in HTS Transformers

HTS transformers leakage flux and short circuit force mitigation through optimal design of auxiliary windings

Electromagnetic Characteristic Calculation of Several Parallel Coils for High Current Transformer Based on Field-Circuit Coupling Method

HTS Transformer Windings Design Using Distributive Ratios for Minimization of Short Circuit Forces

The Impact of Multilayered Flux Diverters on Critical Current in HTS Transformer Windings

AC loss simulation in a HTS 3-Phase 1 MVA transformer using H formulation

Test Results and Conclusions From a 1 MVA Superconducting Transformer Featuring 2G HTS Roebel Cable

Test of 6-kVA Three-Phase Flux Transfer-Type Current-Limiting Transformer

Development of a Voltage Compensation Type Active SFCL and Its Application for Transient Performance Enhancement of a PMSG-Based Wind Turbine System

The Dielectric Strength of Nomex 410 Paper in Liquid Nitrogen Under Boiling Situations

Development of a 1250-kVA Superconducting Transformer and Its Demonstration at the Superconducting Substation

A Diversified Multiobjective Simulated Annealing and Genetic Algorithm for Optimizing a Three-Phase HTS Transformer

Development of a 1250-kVA Superconducting Transformer and Its Demonstration at the Superconducting Substation

Winding Design and Electromagnetic Analysis for a 1250 kVA HTS Transformer

Development of a Three-Phase Superconducting Power Transformer

Ac loss modelling and measurement of superconducting transformers with coated-conductor Roebel-cable in low-voltage winding

Critical Current and Cooling Favored Structure Design and Electromagnetic Analysis of 1 MVA HTS Power Transformer

Verification Testing for a 1 MVA 3-Phase Demonstration Transformer Using 2G-HTS Roebel Cable

Current limiting performance test of 3-phase tri-axial transformer-type SFCL with re-wound structure at 3-line-to-ground fault in lab-scale transmission system

Comparison of the quench and fault current limiting characteristics of the flux-coupling type SFCL with single and three-phase transformer