Ключевые слова: SULTAN, measurement setup, optical properties, fibers, sensors, temperature dependence, HTS, REBCO, tapes, quench detection, cryogenic systems
Ключевые слова: fusion magnets, HTS, REBCO, Bi-based systems, soldered-stacked-square wire, Roebel conductors, strands, comparison, thermal stability, quench propagation, quench detection, quench temperature, SULTAN, measurement setup, measurement technique, current-voltage characteristics, experimental results
Ключевые слова: ITER, LTS, NbTi, coils poloidal field, joints, operational performance, SULTAN, ac losses, resistance, test long-term operation, review
Ключевые слова: SULTAN, measurement setup, ITER, coils poloidal field, LTS, NbTi, cable-in-conduit conductor, joints, design, design parameters, joint resistances, current-voltage characteristics, electromagnetic forces, test results, modeling, numerical analysis, power, dissipative properties, current distribution, nonlinear effects, facility
Ключевые слова: fusion magnets, HTS, tapes, coils, quench detection, MgB2, Nb3Sn, pnictides, wires, winding techniques, resistance, SULTAN, hot spots, experimental results
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, bronze process, internal tin method, ac losses, measurement technique, SULTAN
Bruzzone P., Muzzi L., Corato V., Marzi G.D., Corte A.D., Zignani C.F., Kumar M., Sedlak K., Formichetti A., Tiseanu I., Righetti R., Frittitta C.
Michael P.C., Badcock R.A., Castaldo B., Davies M., Hartwig Z., Salazar E.E., Segal M., Vieira R.F., Estrada J., Fry V., Bajko M.-3, Gonzales J.T.
Ключевые слова: SULTAN, fibers, optical properties, measurement technique, quench detection, HTS, cables, magnets, cooling technology, test results, VIPER cable, facility
Bruzzone P., Stepanov B., Zhang Y., Shi Y., Nijhuis A., Liu S., Long F., Qin J., Guo Z., Dai C., Xiang B., YuWu, Li. J., Derevd A.
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, cycling, loads, mechanical treatment, thermal performance, SULTAN, current sharing, strain effects, n-value, degradation studies, test results
Ключевые слова: fusion magnets, HTS, REBCO, tapes, cable-in-conduit conductor, quench propagation, thermal-hydraulics, modeling, quench protection, hot spots, test results, SULTAN, numerical analysis
Ключевые слова: DEMO, LTS, Nb3Sn, Rutherford cables, prototype, react-and-wind technique, stability, measurement setup, SULTAN, dc performance, ac performance, test results, resistance, critical temperature, cycling, ac losses
Zenobio A.D., Chiarelli S., Bruzzone P., Stepanov B., Turtu S., Muzzi L., Corato V., Marzi G.D., Corte A.D., Zignani C.F., Affinito L., Kumar M., Bragagni A., Seri M., Roveta G., Roveta M., Freda R., Anemona A., Sedlak K., Formichetti A., Righetti R., Galignano S., Arabi M., Merli L., Molino G.
Ключевые слова: ITER, cable-in-conduit conductor, LTS, NbTi, strands, coils toroidal, central coils, ac losses, modeling, numerical analysis, experimental results, SULTAN, comparison
Zanino R., Breschi M., Bauer P., Ribani P.L., Martovetsky N., Bonifetto R., Gauthier F., Cavallucci L., Zappatore A.
Ключевые слова: ITER, LTS, Nb3Sn, cable-in-conduit conductor, central coils, measurement setup, ac losses, calorimetric method, transport currents, damping, test results, SULTAN, modeling, comparison
Ключевые слова: LTS, Nb3Sn, cables, fusion magnets, DEMO, coils toroidal, react-and-wind technique, joints, fabrication, ac losses, resistance, test results, SULTAN
Sedlak K., Anvar V.A., Bagrets N., Biancolini M.E., Bonifetto R., Bonne F., Boso D., Brighenti A., Bruzzone P., Celentano G., Chiappa A., D'Auria V., Dan M., Decool P.*10, Corte A.D., Dembkowska A.*11, Dicuonzo O., Duran I.*12, Eisterer M.*13, Ferro A., Zignani C.F., Fietz W.H., Frittitta C., Gaio E., Giannini L., Giorgetti F., Gomory F.*14, Granados X.*15, Guarino R., Heller R., Hoa C., Ivashov I.*16, Jiolat G.*10, Jirsa M.*17, Jose B.*10, Kembleton R.*18, Kumar M., Lacroix B.*10, Coz Q.L.*19, Lewandowska M.*11, Maistrello A., Misiara N.*10, Morici L., Muzzi L., Nicollet S.*10, Nijhuis A., Nunio F.*10, Portafaix C.*10, Romanelli G., Sarasola X., Savoldi L., Stepanov B., Tiseanu I.*20, Tomassetti G., Torre A.*10, Turtщ S., Uglietti D., Vallcorba R.*10, Viererbl L.*21, Vojenciak M.*14, Vorpahl C.*18, Weiss K., Wesche R., Wolf M.J., Zani L.*10, Zanino R., Zappatore A., Corato V.
Pfeiffer A.T., Pierson S.Z., Radovinsky A., Rowell M.D., Salazar E.E., Segal M., Stahle P.W., Takayasu M., Toland T.L., Zhou L., Hartwig Z.S., Vieira R.F., Sorbom B.N., Badcock R.A., Bajko M., Beck W.K., Castaldo B., Craighill C.L., Davies M., Estrada J., Fry V., Golfinopoulos T., Hubbard A.E., Irby J.H., Kuznetsov S., Lammi C.J., Michael P.C., Mouratidis T., Murray R.A.
Ключевые слова: cable-in-conduit conductor, joints, prototype, ac losses, frequency dependence, test results, SULTAN, modeling, experimental results, comparison, temperature rise
Ключевые слова: ITER, central coils, photo, Japan, cable-in-conduit conductor, fabrication, test results, SULTAN, design parameters, current sharing, neutron diffraction, twist-pitch
Ключевые слова: Tokamak, central coils, LTS, Nb3Sn, cable-in-conduit conductor, strands, twist-pitch, design parameters, fabrication, current sharing, measurement setup, SULTAN, mechanical properties, critical caracteristics, critical current, strain effects, magnetic field dependence, experimental results, numerical analysis
Ключевые слова: ITER, central coils, LTS, Nb3Sn, cable-in-conduit conductor, ac losses, SULTAN, interstrand contact resistances, experimental results
Ключевые слова: ITER, coils toroidal, thermal conductivity, cooling technology, experimental results, SULTAN
Breschi M., Koizumi N., Takahashi Y., Isono T., Hemmi T., Kawano K., Devred A., Martovetsky N., Bessette D., Suwa T., Gauthier F., Ozeki H.
Ключевые слова: ITER, coils toroidal, coils insert, loads, cycling, current sharing, temperature distribution, SULTAN, test results, strain effects
Ключевые слова: ITER, coils toroidal, SULTAN, test results, strands, cables, current sharing, cycling, mechanical properties, strain effects, LTS, Nb3Sn, cable-in-conduit conductor, coatings, ac losses
Wang L., Libeyre P., Ilyin Y., Wu W., Dolgetta N., Simon F., Wei J., Sgobba S., Santillana I.A., Langeslag S., Bernard T.
Ключевые слова: ITER, correction coils, design parameters, joints, prototype, test results, joint resistances, fabrication, SULTAN, ac losses, frequency dependence
Ключевые слова: SULTAN, measurement setup, coils poloidal field, LTS, NbTi, electromagnetic forces, quench, fusion magnets, ITER, ac losses, loads, mechanical training, minimum quench energy, facility
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, operational performance, current sharing, SULTAN, China, Europe, test results, n-value, mechanical properties, strain effects, ac losses
Ключевые слова: cable-in-conduit conductor, LTS, NbTi, thermal properties, numerical analysis, forced flow conductor, modeling, SULTAN, test results
Zanino R., Bruzzone P., Breschi M., Isono T., Zani L., Devred A., Martovetsky N., Nabara Y., Bessette D., Bonifetto R., Savoldi L.
Ключевые слова: ITER, central coils, LTS, Nb3Sn, strands, test results, SULTAN, mechanical properties, strain effects
Ключевые слова: modeling, numerical analysis, Tokamak, central coils, cable-in-conduit conductor, LTS, NbTi, quench, SULTAN, stability, helium supercritical, minimum quench energy, new
Ключевые слова: SULTAN, test results, comparison, ITER, magnetic systems, coils toroidal, coils poloidal field, central coils, LTS, Nb3Sn, NbTi, cable-in-conduit conductor, facility
Ключевые слова: LTS, Nb3Sn, strands, design parameters, cable-in-conduit conductor, jacketing, ITER, coils toroidal, operational performance, test results, SULTAN
Bruzzone P., Stepanov B., Liu B., Devred A., Wu Y., Liu H., Long F., Yu M., Liu F., Qin J., Sedlak K.
Ключевые слова: ITER, correction coils, LTS, NbTi, strands, cables, critical caracteristics, ac losses, SULTAN, test results, critical temperature, critical current
Ключевые слова: ITER, LTS, Nb3Sn, cable-in-conduit conductor, design parameters, prototype, cycling, SULTAN, strands, surface, roughness, twist-pitch, microstructure, test results
Ключевые слова: LTS, Nb3Sn, strands, fabrication, ITER, cable-in-conduit conductor, current sharing, SULTAN, internal tin method, critical caracteristics, critical current, n-value, ac losses, RRR parameter, new
Ключевые слова: ITER, coils poloidal field, cable-in-conduit conductor, LTS, NbTi, SULTAN, measurement setup, ac losses, mechanical losses
Ключевые слова: ITER, coils toroidal, cable-in-conduit conductor, heat treatment, SULTAN, modeling, numerical analysis, transient performance
Ключевые слова: presentation, LTS, Nb3Sn, cable-in-conduit conductor, modeling, experimental results, pulsed operation, stability, minimum quench energy, SULTAN, ITER, central coils
Vysotsky V.S., Lelekhov S.A., Potanina L.V., Fetisov S.S., Shutov K.A., Patrikeev V.M., Taran A.V., Kaverin D.S., Kochetov M.V., Chensky I.F., Tronza V.I.
Ключевые слова: ITER, coils toroidal, coils poloidal field, review, Russia, twist-pitch, stability, SULTAN, test results, LTS, Nb3Sn, strands, defects, RRR parameter, critical caracteristics, ac losses
Bruzzone P., Stepanov B., Park S., Nunoya Y., Okuno K., Takahashi Y., Isono T., Hemmi T., Lee J., Kawano K., Sim K., Tsutsumi F., Shibutani K., Nabara Y., Park P., Oshikiri M., Kwon S.P., Suwa T., Ozeki H., Sedlak K., Han I., Jang K.
Ключевые слова: LTS, NbTi, strands, RRR parameter, SULTAN, test results
Ключевые слова: LTS, Nb3Sn, internal tin method, strands, fabrication, ITER, coils toroidal, heat treatment, critical caracteristics, critical current, n-value, test results, SULTAN, critical temperature, cycling
Jewell M.C., Larbalestier D.C., Devred A., Martovetsky N., Pong I., Lee P.J., Sanabria C., Starch W., Blum T.
Ключевые слова: LTS, Nb3Sn, strands, microstructure, ITER, coils toroidal, SULTAN, crack formation, experimental results
Ключевые слова: measurement setup, SULTAN, EDIPO, HTS, cables, test results, design, heat exchanger, high current processing, HTS, coated conductors, upgrade
Ключевые слова: LTS, NbTi, cable-in-conduit conductor, ITER, fabrication, test results, ac losses, minimum quench energy, SULTAN, critical caracteristics, magnetic field dependence
Ключевые слова: ITER, LTS, Nb3Sn, cable-in-conduit conductor, test results, SULTAN, twist-pitch, microstructure, damage mechanisms
Bruzzone P., Stepanov B., Koizumi N., Nunoya Y., Matsui K., Okuno K., Takahashi Y., Isono T., Sugimoto M., Hemmi T., Miyashita K., Tsutsumi F., Shibutani K., Nabara Y., Miyatake T., Murakami Y., Kajitani H., Oshikiri M., Uno Y., Iguchi M., Suwa T., Ozeki H., Sedlak K., Takagi A., Nakada Y.
Ключевые слова: fusion magnets, ITER, DEMO, HTS, Bi2212, wires, REBCO, coated conductors, strands, fabrication, critical caracteristics, critical current, bending radius, mechanical properties, pressure dependence, transverse stress, magnetic field dependence, cables, twisting, termination, SULTAN, EDIPO, test results, DI-Bi2223, tapes, high field magnets
Liu B., Li H., Wu Y., Liu H., Liu S., Long F., Yu M., Liu F., Qin J., Wei Z., Xue T., Wang K., Su C.
Ключевые слова: ITER, LTS, NbTi, cable-in-conduit conductor, coils poloidal field, correction coils, fabrication, strands, design parameters, mechanical properties, stress effects, strain effects, tensile tests, jacketing, fatigue behavior, crack formation, critical temperature, current, experimental results, SULTAN
Ключевые слова: ITER, coils poloidal field, LTS, NbTi, strands, design parameters, ac losses, minimum quench energy, SULTAN, test results, critical temperature
Ключевые слова: EDIPO, SULTAN, measurement technique, quench detection, status, commissioning
Mitchell N., Vostner A., Devred A., Romano G., Bessette D., Jong C., Bevillard G., Gardner M., Backbier I., Lillaz F.
Zenobio A.D., Park S., Turtu S., Choi H., Lee J., Park P.Y., Park W.W., Corte A.D., Affinito L., Quagliata F., Kwon S.P., Lee D.H., Ma Y.J., Kang S.C., Anemona A., Seo Y.H., Sim K.H., Han I.
Ключевые слова: fusion magnets, review, Korea, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, fabrication, design parameters, twist-pitch, jacket, jacketing, test results, SULTAN, current sharing, high field magnets
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, test results, SULTAN, critical caracteristics, n-value, ac losses, critical current, RRR parameter, jacket, facility
Vysotsky V.S., Polyakova N.V., Svalov G.G., Potanina L.V., Fetisov S.S., Shutov K.A., Kaverin D.S., Tronza V.I.
Ключевые слова: ITER, coils toroidal, strands, LTS, Nb3Sn, RRR parameter, SULTAN, test results
Bruzzone P., Stepanov B., Mitchell N., Vostner A., Boutboul T., March S.A., Bessette D., Readman P., Devred A
Ключевые слова: SULTAN, LTS, Nb3Sn, bronze process, cable-in-conduit conductor, mechanical properties, strain effects, electric field, cycling, loads, ac losses, jacket, heat treatment, coils toroidal, ITER, test results
Bruzzone P., Stepanov B., Mitchell N., Nunoya Y., Okuno K., Takahashi Y., Isono T., Hamada K., Vostner A., Rey C.M., Devred A., Martovetsky N., Bessette D., Pong I., Reiersen W.
Ключевые слова: ITER, central coils, LTS, Nb3Sn, strands, wires multifilamentary, cable-in-conduit conductor, design, SULTAN, test results, twist-pitch
Ключевые слова: ITER, coils toroidal, cable-in-conduit conductor, test results, LTS, Nb3Sn, SULTAN, strands, twist-pitch, ac losses, test results, critical caracteristics, critical current, n-value
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.