Ключевые слова: numerical analysis, modeling, NbTi, ITER, coils poloidal field, design parameters, design, LTS
Ключевые слова: cables, ITER, central coils, joints, LTS, fabrication, power equipment
Turtu S., Vostner A., Devred A., Cloez H., Boutboul T., Torre A., Bessette D., Polli G.M., Affinito L., Reccia L., Decool P., Maierna F., della Corte.A.
Ключевые слова: NbTi, coils poloidal field, ITER, LTS, cable-in-conduit conductor, jacketing, assembled conductors, fabrication
Turtu S., Muzzi L., Polli G.M., Villari R., Reccia L., Cucchiaro A., Pizzuto A., della Corte.A., Di Zenobio.A., Crisanti F.
Ключевые слова: magnetic systems, numerical analysis, ITER, LTS, Nb3Sn, NbTi, Tokamak, model small-scale, coils toroidal, design parameters, central coils, high field magnets
Tsuchiya K., Turtu S., Zani L., Yoshida K., Muzzi L., Kizu K., Ishida S., Torre A., Murakami H., Peyrot M., Barabaschi P., Duglue D., Meunier L., Tomarchio V., Verrecchia M., Decool P., Cucchiaro A., della Corte.A., Di Zenobio.A., Marechal J.
Ключевые слова: Tokamak, magnetic systems, coils toroidal, design parameters, LTS, NbTi, strands, cables, coils poloidal field, central coils, Nb3Sn, power equipment, high field magnets
Ключевые слова: ITER, cable-in-conduit conductor, LTS, Nb3Sn, ac losses, interstrand contact resistances, mechanical properties, stiffness, experimental results
Wesche R., Bruzzone P., Vogel M., Salpietro E., Portone A., Bagnasco M., Cau F., Testoni P., Baker B., Fernandez-Cano E., Theisen E.
Ключевые слова: LTS, Nb3Sn, cable-in-conduit conductor, coils racetrack, measurement setup, economic analysis, EDIPO, review, status
Mitchell N., Libeyre P., Liu L., Liu X., Wu W., Han S., Jong C., Dolgetta N., Foussat A., Wei J., Du S., Yu X.
Ключевые слова: ITER, correction coils, design, LTS, NbTi, cable-in-conduit conductor, design parameters, fabrication
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, n-value, mechanical properties, strain effects, degradation studies, modeling, numerical analysis
Ключевые слова: ITER, coils poloidal field, magnets double pancake, LTS, NbTi, cables, fabrication, power equipment
Ключевые слова: ITER, modeling, measurement technique, LTS, thermal-hydraulics, numerical analysis, coils toroidal, SULTAN, Nb3Sn, wires
Bruzzone P., Stepanov B., Koizumi N., Nunoya Y., Matsui K., Nakajima H., Takahashi Y., Isono T., Hemmi T., Yoshikawa M., Nabara Y.
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, test results, SULTAN, voltage
Nishijima G., Awaji S., Watanabe K., Oguro H., Ishigaki T., HOSHIKAWA A., Iwase K., Yonemura M., *4 Adipranoto D.S.
Ключевые слова: modeling, LTS, Nb3Sn, wires, internal tin method, mechanical properties, strain effects, upper critical fields, critical temperature, bronze process
Ключевые слова: LTS, Nb3Al, wires, fabrication, RHQT-process, critical caracteristics, Jc/B curves, microstructure, length
Kikuchi A., Iijima Y., Tsuchiya K., Takao T., Banno N., Takeuchi T., Nimori S., Barzi E., Yamada R., Tanaka K., Nakamoto T., Ghosh A., Takigawa H., Terashima A., Maruyama M., Zlobin A., Nakagawa K., Kuroda Y.
Ключевые слова: LTS, V3Ga, wires, fabrication, precursors, microstructure, PIT process, critical caracteristics, critical current density, composition, Jc/B curves
Larbalestier D.C., Cheggour N., Ghosh A.K., Stauffer T.C., Lu X.F., Lee P.J., Goodrich L.F., Motowidlo L.R., Distin J.S.
Ключевые слова: HTS, bulk, motors synchronous, trapped field, YBCO, ac losses, modeling, numerical analysis, experimental results, rotating machines
Ключевые слова: cable-in-conduit conductor, numerical analysis, ac losses, strands, ITER, coils poloidal field, modeling, NbTi, twist-pitch, interstrand contact resistances, LTS
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.