Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: modeling
Показаны 1−20 из 2935	< предыдущая 1 2 3 ... 147 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Гаврилкин С.Ю., Цветков А.Ю., Безотосный П.И., Дмитриева К.А., Лыков А.Н.

Modeling of Quench Behavior of YBa2Cu3O 7-d Pancake Magnets and Distributed-Temperature-Sensing-Based Quench Detection for Operating Temperature 30–77 K

Ключевые слова: HTS, YBCO, coated conductors, magnets, coils pancake, insulating medium, thermal conductivity, modeling, quench properties, quench detection, minimum quench energy, heat capacity, temperature distributions, quench propagation, numerical analysis

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.4700311

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Chen W., He Y., Yan Z., Nie X.

High-Temperature Superconducting Capacitor and Its Application to a Superconducting Wireless Power Transfer System

Ключевые слова: power transfer, wireless, HTS, capacitor, design parameters, YBCO, plates, dielectrics, multilayered structures, fabrication, comparison, conventional systems, modeling, numerical analysis, experimental results, coated conductors, coils

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.5000207

Полный текст на Sci-Hub

Дополнительная информация

Gonzalez-Parada A., Olivares-Galvan J.C., Hernandez-Robles I.A., Gonzalez-Ramirez X.

Comparison of the Energy Potential of Copper and Superconducting Linear Electric Generators

Ключевые слова: rotating machines, generators, stators, coils, Bi2223, tapes, HTS, conventional systems, Cu-based conductors, design parameters, comparison, modeling, numerical analysis, cost estimate, magnetic field distribution, fabrication, prototype, experimental results, power

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.5200105

Полный текст на Sci-Hub

Дополнительная информация

Sirois F., Lacroix C.

High Temperature Superconducting Tape with a Current Flow Diverter Architecture for Current Flow Limitation in a High Voltage Direct Current Grid

Ключевые слова: HTS, GdBCO, coated conductors, power equipment, power transmission lines, FCL, divertor, design, current limiting characteristics, high voltage tests, hot spots, modeling, numerical analysis

EUROPEAN SUPERCONDUCTIVITY NEWS FORUM, 2019, v.46, N , p.633

Полный текст на Sci-Hub

Дополнительная информация

Narayanamoorthi R., Juliet A.V.

Capacitor-Less High-Strength Resonant Wireless Power Transfer Using Open Bifilar Spiral Coil

Ключевые слова: power transfer, wireless, coils bifilar, coils spiral, converters, modeling, numerical analysis, capacity, frequency dependence, efficiency, experimental results

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.5500108

Полный текст на Sci-Hub

Дополнительная информация

Jiang Z., Shen T., Gou X.

Impact of the Complex Interface Between Bi2Sr2CaCu2Ox Filaments and Ag Matrix on the Quench Behavior of Composite Round Wires

Ключевые слова: HTS, Bi2212/Ag/AgAlloy, composites, wires round, filaments, interfaces, quench properties, modeling, numerical analysis, minimum quench energy, normal zone propagation

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.6400109

Полный текст на Sci-Hub

Дополнительная информация

Grilli F., Morandi A., Sirois F.

Comparison of Constitutive Laws for Modeling High-Temperature Superconductors

Ключевые слова: HTS, critical state model, numerical analysis, modeling, percolation model, critical characteristics, critical current density, current-voltage characteristics, electrical field, current density, distribution, magnetization, ac losses, dissipative properties

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.8000110

Полный текст на Sci-Hub

Дополнительная информация

Sokolovsky V., Meerovich V.

Resistive Domains in Thin Superconducting Film Structures

Ключевые слова: modeling, numerical analysis, thin films, films large-area, strips, spiral lines, critical characteristics, current-voltage characteristics, single-domain, resistivity, thermal stability

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.8000209

Полный текст на Sci-Hub

Дополнительная информация

Noe M., Grilli F., Liu Y., Zhang M., Zermeno V.M., Schreiner F., Ou J.

Comparison of 2D simulation models to estimate the critical current of a coated superconducting coil

Ключевые слова: HTS, GdBCO, coated conductors, coils pancake, coils racetrack, design parameters, modeling, critical characteristics, critical current, n-value, flux density, current-voltage characteristics, angular dependence, numerical analysis, experimental results, magnetic field distribution, comparison

Superconductor Science Technology, 2019, v.32, N 1, p.14001

Полный текст на Sci-Hub

Дополнительная информация

Nakamura T., Itoh Y., Takahashi K., Yanagi Y., Fujishiro H., Naito T., Namba S.

Thermal and magnetic strain measurements on a REBaCuO ring bulk reinforced by a metal ring during field-cooled magnetization

Ключевые слова: HTS, EuBCO, bulk, rings, reinforcement, magnetization, thermal strain, temperature dependence, strain effects, modeling, numerical analysis, experimental results, critical characteristics, Jc/B curves, cooling technology, strain effects, distribution, mechanical properties

Superconductor Science Technology, 2019, v.32, N 1, p.15007

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Chen W., He Y., Hu Y., Yan Z.

Superconducting electrode capacitor based on double-sided YBCO thin film for wireless power transfer applications

Ключевые слова: HTS, YBCO, thin films, double-side structures, capacitor, power transfer, wireless, fabrication, prototype, substrate LaAlO3, magnetron sputtering, modeling, capacity, frequency dependence, resistance, efficiency, experimental results

Superconductor Science Technology, 2019, v.32, N 1, p.15010

Полный текст на Sci-Hub

Дополнительная информация

Dhalle M., Nijhuis A., Zhou C., Kate H.H.

The Effect of Strain on the Transport Properties of Superconducting Strand and Cable in a Conduit Conductor

Ключевые слова: cable-in-conduit conductor, strands, SULTAN, central coils, ITER, mechanical properties, strain effects, distribution, critical current, critical current, bending strain, local distribution, modeling

IEEE Transactions Applied Superconductivity, 2019, v.29, N 1, p.8400105

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Yang R., Xiao X., Zheng Z+.

Cooperative Rotor-Side SMES and Transient Control for Improving the LVRT Capability of Grid-Connected DFIG-Based Wind Farm

Ключевые слова: wind farms application, SMES, modeling, numerical analysis, power equipment

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.0600204

Полный текст на Sci-Hub

Дополнительная информация

Shen B., Jin Z., Huang Z., Hao L., Qiu D., Dong F.

Study on Electrodynamic Suspension System with High-Temperature Superconducting Magnets for a High-Speed Maglev Train

Ключевые слова: Maglev system, suspension, HTS, magnets, eddy currents, REBCO, coated conductors, modeling, levitation performance, numerical analysis, modeling, electromagnetic force

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.3600105

Полный текст на Sci-Hub

Дополнительная информация

Chen D., Zhu J., Liu C., Guo Y., Lei G., Li Y.3

Robust Design Optimization of a High-Temperature Superconducting Linear Synchronous Motor Based on Taguchi Method

Ключевые слова: HTS, rotating machines, motors synchronous, design, modeling, prototype, design parameters, numerical analysis

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.3600206

Полный текст на Sci-Hub

Дополнительная информация

Chen J., Wang D., Huang W., Zhu H., Jin S.

Feasibility Analysis of Helical Superconducting MHD Propulsor for Naval Vessels

Ключевые слова: MHD generators, propulsion system, helical winding, magnets, efficiency, power, cost estimate, HTS, REBCO, coated conductors, modeling, numerical analysis, shipboard applications

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.3600407

Полный текст на Sci-Hub

Дополнительная информация

Feng J., Wu Z.H., Cao J.G.

Analysis and Study of the Influence on the Train Side Harmonic as a SMES Fabricated Into the EMU Converter System

Ключевые слова: SMES, railway applications, power supply, harmonic coefficients, modeling, numerical analysis

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.3800105

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: modeling

Метод расчета критического тока неоднородных сверхпроводящих пленок

A Novel Design Method of Independent Zonal Superconducting Shim Coil

A Fast Quench Protection System for High-Temperature Superconducting Magnets

Modeling of Quench Behavior of YBa2Cu3O 7-d Pancake Magnets and Distributed-Temperature-Sensing-Based Quench Detection for Operating Temperature 30–77 K

High-Temperature Superconducting Capacitor and Its Application to a Superconducting Wireless Power Transfer System

Comparison of the Energy Potential of Copper and Superconducting Linear Electric Generators

High Temperature Superconducting Tape with a Current Flow Diverter Architecture for Current Flow Limitation in a High Voltage Direct Current Grid

Capacitor-Less High-Strength Resonant Wireless Power Transfer Using Open Bifilar Spiral Coil

Impact of the Complex Interface Between Bi2Sr2CaCu2Ox Filaments and Ag Matrix on the Quench Behavior of Composite Round Wires

Comparison of Constitutive Laws for Modeling High-Temperature Superconductors

Resistive Domains in Thin Superconducting Film Structures

Comparison of 2D simulation models to estimate the critical current of a coated superconducting coil

Thermal and magnetic strain measurements on a REBaCuO ring bulk reinforced by a metal ring during field-cooled magnetization

Superconducting electrode capacitor based on double-sided YBCO thin film for wireless power transfer applications

The Effect of Strain on the Transport Properties of Superconducting Strand and Cable in a Conduit Conductor

Cooperative Rotor-Side SMES and Transient Control for Improving the LVRT Capability of Grid-Connected DFIG-Based Wind Farm

Study on Electrodynamic Suspension System with High-Temperature Superconducting Magnets for a High-Speed Maglev Train

Robust Design Optimization of a High-Temperature Superconducting Linear Synchronous Motor Based on Taguchi Method

Feasibility Analysis of Helical Superconducting MHD Propulsor for Naval Vessels

Analysis and Study of the Influence on the Train Side Harmonic as a SMES Fabricated Into the EMU Converter System