Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: modeling
Показаны 2281−2300 из 4835	< предыдущая 1 ... 113 114 115 116 117 ... 242 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Wang Y., Zhu Z., Yuan W., Zhang M., Sheng J., Venuturumilli S.

Influence of Harmonic Current on Magnetization Loss of a Triaxial CORC REBCO Cable for Hybrid Electric Aircraft

Ключевые слова: HTS, REBCO, coated conductors, cables triaxial, CORC cables, aviation application, hybrid systems, ac losses, modeling, numerical analysis, current waveforms, magnetic field density, harmonics impact

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.5900405

Полный текст на Sci-Hub

Дополнительная информация

Xu Y., Wang Z., Wang Z., Tang Y., Ren L., Zhang Z.

Numerical Multiscale Model for AC Loss Calculation of Large-Scale HTS Solenoid Magnets

Ключевые слова: HTS, magnets, coils solenoidal, ac losses, numerical analysis, modeling, YBCO, coated conductors

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.5900505

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Yang Y., Yong H.

Electro-mechanical behavior in arrays of superconducting tapes

Ключевые слова: HTS, REBCO, coated conductors, stacked blocks, mechanical properties, critical caracteristics, elastic behavior, modeling, critical current, stress effects, strain effects, transport currents, magnetic field dependence

J Applied Physics, 2018, v.124, N 7, p.73902

Полный текст на Sci-Hub

Дополнительная информация

Huhtinen H., Paturi P., Malmivirta M., Hynninen T.

Angle dependent molecular dynamics simulation of flux pinning in YBCO superconductors with artificial pinning sites

Ключевые слова: HTS, YBCO, pinning centers artificial, angular dependence, modeling, vortex dynamics, critical caracteristics, critical current density, anisotropy, pinning force, magnetic field dependence, rods, size effect

J Physics: Condensed Matter, 2018, v.30, N 31, p.315902

Полный текст на Sci-Hub

Дополнительная информация

Zhang W., Zhou Y., Yong H., Liu D.

Thermal stability and mechanical behavior in no-insulation high-temperature superconducting pancake coils

Ключевые слова: HTS, coils pancake, insulationless, design parameters, thermal stability, mechanical properties, quench, modeling, thermal conductivity, temperature dependence, heat capacity, current distribution, stress distribution, strain effects, pulsed operation, geometry effects, recovery characteristics

Superconductor Science Technology, 2018, v.31, N 8, p.85010

Полный текст на Sci-Hub

Дополнительная информация

Amemiya N., Jiang Z., Fang J., Zhang X., Song W., Staines M., Badcock R.A., Sogabe Y.

AC loss simulation in a HTS 3-Phase 1 MVA transformer using H formulation

Ключевые слова: power equipment, transformers three-phase, design parameters, ac losses, HTS, YBCO, coated conductors, Roebel conductors, coils, numerical analysis, flux density, distribution, current density, modeling, power losses

Cryogenics, 2018, v.94, N , p.14-21

Полный текст на Sci-Hub

Дополнительная информация

Duan Y., Gao Y.

Effect of substrate thickness on interfacial adhesive strength and thermal residual stress of second-generation high-temperature superconducting tape using peel test modeling

Ключевые слова: HTS, REBCO, coated conductors, substrate Hastelloy, thickness dependence, adhesion, interfaces, thermal stress, mechanical properties, laminations, modeling, numerical analysis, stress distribution

Cryogenics, 2018, v.94, N , p.89-94

Полный текст на Sci-Hub

Дополнительная информация

Datta T.S., Kar S., Kumar M., Sharma R.G., Thekkethil S.R., Soni V., Suman N.K., Rastogi V.

Stress-Induced Magnetic Field Inhomogeneity in a 1.5 T Superconducting MRI Magnet

Ключевые слова: MRI magnets, mechanical properties, stress effects, homogeneity, magnetic field distribution, stress distribution, coils, modeling, numerical analysis

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.4401905

Полный текст на Sci-Hub

Дополнительная информация

Breschi M., Yang Y., Ribani P.L., Cavallucci L.

Electrothermal Modeling of Quench in REBCO Roebel Cables

Ключевые слова: HTS, REBCO, coated conductors, Roebel conductors, modeling, quench properties, electro-thermal model, numerical analysis, current distribution, minimum quench energy, thermal stability

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.4703405

Полный текст на Sci-Hub

Дополнительная информация

Rezaee M., Harley R.G.

Resonance-Based Fault Current Limiters - Theory, Applications, and Assessment

Ключевые слова: power equipment, FCL, conventional systems, modeling, resonance effects

IEEE Transactions Industry Applications, 2018, v.54, N 4, p.3066-3076

Полный текст на Sci-Hub

Дополнительная информация

Chen X., Zhao L., Li C., Xiao X., Huang C., Zheng Z.

Performance Evaluation of a MW-Class SMES-BES DVR System for Mitigation of Voltage Quality Disturbances

Ключевые слова: power equipment, SMES, hybrid systems, battery storage, modeling, transient performance, quality control

IEEE Transactions Industry Applications, 2018, v.54, N 4, p.3090-3099

Полный текст на Sci-Hub

Дополнительная информация

Barzegar-Bafrooei M.R., Foroud A.A.

Performance evaluation of distance relay in the presence of hybrid SFCL

Ключевые слова: power equipment, FCL, hybrid systems, protective system, operational performance, impedance, current waveforms, modeling, numerical analysis

IET Science Measurement Technology, 2018, v.12, N 5, p.581-593

Полный текст на Sci-Hub

Дополнительная информация

Montoya O.D., Gil-Gonzalez W.

Passivity-based PI control of a SMES system to support power in electrical grids: A bilinear approach

Ключевые слова: power equipment, SMES, control systems, modeling, numerical analysis, power reactive, power active

J Energy Storage, 2018, v.18, N , p.459-466

Полный текст на Sci-Hub

Дополнительная информация

Sedighizadeh M., Esmaili M., Parvaneh H.

Coordinated optimization and control of SFCL and SMES for mitigation of SSR using HBB-BC algorithm in a fuzzy framework

Ключевые слова: power equipment, FCL, SMES, control systems, modeling, numerical analysis, power active, power reactive

J Energy Storage, 2018, v.18, N , p.498-508

Полный текст на Sci-Hub

Дополнительная информация

Duchateau J.L., Devred A., Nijhuis A., Bagni T.

Quench energy studies in ITER conductors for different magnetic field perturbations with Jackpot and THEA combined models

Ключевые слова: ITER, cable-in-conduit conductor, LTS, Nb3Sn, quench, modeling, central coils, stability, thermal-hydraulics, electromagnetic forces, electro-thermal model, LTS, Nb3Sn, test results, dissipative properties, pulsed operation, modeling

Superconductor Science Technology, 2018, v.31, N 9, p.95001

Полный текст на Sci-Hub

Дополнительная информация

Grilli F., Trillaud F., Zermeno V.M., Berrospe-Juarez E.

Iterative multi-scale method for estimation of hysteresis losses and current density in large-scale HTS systems

Ключевые слова: HTS, ac losses, distribution, critical caracteristics, critical current density, modeling, numerical analysis, critical current distribution, magnets, coils pancake, time evolution, modeling computational

Superconductor Science Technology, 2018, v.31, N 9, p.95002

Полный текст на Sci-Hub

Дополнительная информация

Li X., Zhao Y., Pan Y., Li Z., Hong Z., Wang M., Wu W., Zhang Z., Sheng J., Jin Z., Huang Z., Dong F.

An equivalent homogenized model for non-superconducting joints made by ReBCO coated conductors

Ключевые слова: joints, YBCO, coated conductors, solder, modeling, joint resistances, geometry effects, field decay, numerical analysis

Superconductor Science Technology, 2018, v.31, N 9, p.95004

Полный текст на Sci-Hub

Дополнительная информация

Sharma R., Singh N., Khenata R., Varshney D.

Effect of Al doping on thermoelectric power of Mg1-xAlxB2 phonon drag and carrier diffusion contribution

Ключевые слова: MgB2, doping effect, thermoelectric properties, modeling

AIP Conference Proceedings , 2018, v.1953, N , p.120004

Полный текст на Sci-Hub

Дополнительная информация

Sharma R., Singh N., Khenata R., Varshney D.

Influence of pressure and volume on superconductivity in Mg1-xAlxB2 and Mg(B1-yCy)2

Ключевые слова: MgB2, doping effect, pressure dependence, modeling, critical temperature

AIP Conference Proceedings , 2018, v.1953, N , p.120005

Полный текст на Sci-Hub

Дополнительная информация

Berger K., Smith A.C., Miller P., Manolopoulos C.D., Iacchetti M.F., Husb M.

Stator Design and Performance of Superconducting Motors for Aerospace Electric Propulsion Systems

Ключевые слова: rotating machines, aviation application, propulsion system, motors, bulk, magnets, stators, design, MgB2, coils, ac performance, design parameters, ac losses, flux density, distribution, magnetic field distribution, efficiency, modeling

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.527005

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: modeling

Influence of Harmonic Current on Magnetization Loss of a Triaxial CORC REBCO Cable for Hybrid Electric Aircraft

Numerical Multiscale Model for AC Loss Calculation of Large-Scale HTS Solenoid Magnets

Electro-mechanical behavior in arrays of superconducting tapes

Angle dependent molecular dynamics simulation of flux pinning in YBCO superconductors with artificial pinning sites

Thermal stability and mechanical behavior in no-insulation high-temperature superconducting pancake coils

AC loss simulation in a HTS 3-Phase 1 MVA transformer using H formulation

Effect of substrate thickness on interfacial adhesive strength and thermal residual stress of second-generation high-temperature superconducting tape using peel test modeling

Stress-Induced Magnetic Field Inhomogeneity in a 1.5 T Superconducting MRI Magnet

Electrothermal Modeling of Quench in REBCO Roebel Cables

Resonance-Based Fault Current Limiters - Theory, Applications, and Assessment

Performance Evaluation of a MW-Class SMES-BES DVR System for Mitigation of Voltage Quality Disturbances

Performance evaluation of distance relay in the presence of hybrid SFCL

Passivity-based PI control of a SMES system to support power in electrical grids: A bilinear approach

Coordinated optimization and control of SFCL and SMES for mitigation of SSR using HBB-BC algorithm in a fuzzy framework

Quench energy studies in ITER conductors for different magnetic field perturbations with Jackpot and THEA combined models

Iterative multi-scale method for estimation of hysteresis losses and current density in large-scale HTS systems

An equivalent homogenized model for non-superconducting joints made by ReBCO coated conductors

Effect of Al doping on thermoelectric power of Mg1-xAlxB2 phonon drag and carrier diffusion contribution

Influence of pressure and volume on superconductivity in Mg1-xAlxB2 and Mg(B1-yCy)2

Stator Design and Performance of Superconducting Motors for Aerospace Electric Propulsion Systems