Ключевые слова: HTS, tapes, REBCO, coils pancake, magnets, design parameters, discharge characteristics, quench protection, numerical analysis
Majoros M., Collings E.W., Tomsic M., Peng X., Rindfleisch M., Doll D., Sumption M. D., Kovacs C., Xue S., Rochester J., Garg T.
Ключевые слова: undulator, MgB2, Jc/B curves, strands, coils racetrack, design parameters, fabrication, infiltration process, test results, modeling
Ключевые слова: power equipment, HTS, YBCO, tapes, cables coaxial, cables three-phase, ac losses, eddy currents, protection layers, harmonics impact, modeling, numerical analysis
Ключевые слова: undulator, prototype, fabrication, LTS, NbTi, coils, cryogenic systems, cryostat, design, helium liquid, cooling technology, test results, quench current
Lorin C., Maksoud W.A., Berriaud C., Nunio F., Calvelli V., Dilasser G., Stacchi F., Lottin J.-., Pontarollo T.
Ключевые слова: detector, LTS, NbTi, cable-in-conduit conductor, coils, cryogenic systems, stability, helium superfluid, magnets, prototype, design, mechanical properties
Ключевые слова: Tokamak, central coils, HTS, Bi2212, tapes, jacket, heat treatment, mechanical properties, tensile tests
Ключевые слова: synchrotron, undulator, measurement technique, pulsed operation, magnetic field distribution, measurement setup
Ключевые слова: Tokamak, coils toroidal, coils D-shaped, fabrication, prototype, test results
Gomory F., Bruzek C.E., Allais A., Magnusson N., Angeli G., Creusot C., Bouvier G., Candido J., Gammelsaeter M., Garofalo E., Hodge E.*10, Hole S.*11, Marian A.*12, Morandi A.*13, Reiser W.*14, West B.*15
Ключевые слова: Europe, power equipment, cables, cryogenic systems, HTS, REBCO, tapes, nitrogen liquid , MgB2, wires, hydrogen liquid, dc performance, FCL resistive, design
Ключевые слова: HTS, YBCO, bulk, single-domain, fabrication, seeding technique, NdBCO, infiltration process, buffer layers, levitation performance, trapped field distribution
Ключевые слова: Maglev system, HTS, tapes, stacked blocks, protection layer Cu, dynamic operation, bearing magnetic, modeling, induced current
Ключевые слова: LTS, Nb3Sn, NbTi, joints, fabrication, welding, microstructure, interfaces, grain boundaries
Ключевые слова: HTS, REBCO, tapes, loop, magnetic flux concentration, experimental results, current-voltage characteristics, flux density
Wang Y., Wang Y., Shi J., Wang J., Chen X., Wang C., Yang H., Zhao L., Li C., Zhang H., Li W., Xu Q., Feng Z., Kang R., Ma R., Liao K.
Ключевые слова: magnets dipole, mechanical properties, strain effects, hybrid systems, Nb3Sn, coils, HTS, coils insert, design, design parameters, test results, LTS
Kim J., Park H., Lee S., Park S.H., Kang H., Choi S., Hahn S., Park J., Jung W., Yan Y., Kim G., Koo J., Cha J., Bang J., Lee J.T., Hahn G., Jang W.
Ключевые слова: HTS, REBCO, tapes, coils saddle, design, design parameters, insulationless, fabrication, overcurrent, experimental results, nucleation
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.