Ключевые слова: review, accelerator magnets, LTS, Nb3Sn, design, design parameters, test results, quench current, temperature dependence, status, high field magnets
Ключевые слова: accelerator magnets, review, LHC, LTS, HTS, magnets dipole, refrigerator, Nb3Sn, NbTi, critical caracteristics, critical current density, growth rate, high field magnets
Ключевые слова: magnetic systems, high field tests, cooling technology, conduction cooled systems, LTS, NbTi, Nb3Sn, coils, HTS, current leads, design parameters, thermal loads, experimental results
Ключевые слова: magnets, conduction cooled systems, fabrication, cryocoolers, magnetic separation, LTS, NbTi, Nb3Sn, current leads, HTS, Bi2223, bulk, design parameters, magnetic field distribution, cryogenic systems
Ключевые слова: magnetic systems, review, accelerator magnets, design parameters, LTS, Nb3Sn, status, high field magnets
Ключевые слова: LTS, NbTi, Nb3Sn, strands, filaments, resistance, current distribution, modeling, measurement setup
Ключевые слова: LTS, Nb3Sn, fabrication, wires, jelly-rolling process, microstructure, composition, grain size, aspect ratios, upper critical fields, critical caracteristics, Jc/B curves
Shikov A.K., Dergunova E.A., Mareev K.A., Beliakov N.A., Zernov S.M., Abramushin K.M., Abdyukhanov I.M., Vorobyeva A.E., Pantsyrnyy V.I., Nasibulin M.N., Anishuk D.S.
Ключевые слова: LTS, Nb3Sn, bronze process, fabrication, strands, ITER, microstructure, twist-pitch, mechanical properties, stress distribution, strain effects, composition
Ключевые слова: magnets, hybrid systems, LTS, Nb3Sn, wires, control systems, critical caracteristics, critical current, n-value, geometry effects, resistance, strain effects, test results, quality control
Ключевые слова: ITER, coils toroidal, insulating medium, design, test results, impregnation, LTS, Nb3Sn, irradiation effects, mechanical properties
Ключевые слова: LTS, Nb3Sn, wires, mechanical properties, irreversible strain, measurement technique
Ключевые слова: NMR magnet, LTS, Nb3Sn, NbTi, HTS, REBCO, coils insert, design parameters, modeling, numerical analysis, screen
Turtu S., Muzzi L., Polli G.M., Villari R., Reccia L., Cucchiaro A., Pizzuto A., della Corte.A., Di Zenobio.A., Crisanti F.
Ключевые слова: magnetic systems, numerical analysis, ITER, LTS, Nb3Sn, NbTi, Tokamak, model small-scale, coils toroidal, design parameters, central coils, high field magnets
Zani L., Barabaschi P., Duglue D., Meunier L., Peyrot M., Tomarchio V., Verrecchia M., Decool P., Marechal J., Torre A., Cucchiaro A., della Corte.A., Di Zenobio.A., Muzzi L., Turtu S., Ishida S., Yoshida K., Tsuchiya K., Kizu K., Murakami H.
Ключевые слова: Tokamak, magnetic systems, coils toroidal, design parameters, LTS, NbTi, strands, cables, coils poloidal field, central coils, Nb3Sn, power equipment, high field magnets
Ключевые слова: ITER, cable-in-conduit conductor, LTS, Nb3Sn, ac losses, interstrand contact resistances, mechanical properties, stiffness, experimental results
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.