Вы запросили

Ключевые слова: density

Показаны 1961−1980 из 3057 < предыдущая 1 ... 97 98 99 100 101 ... 153 следующая > Показать все
Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Fujishiro H., Naito T., Sasaki T.

Trapped Magnetic Field of Dense MgB2 Bulks Fabricated under High Pressure

Ключевые слова: MgB2, bulk, fabrication, high pressure processing, trapped field, hot isostatic pressing, grain boundaries, density, temperature dependence, critical current, critical current density, resistivity, microstructure, experimental results

Physics Procedia, 2013, v.45, N 1, p.93-96

Полный текст на Sci-Hub

Дополнительная информация

Higashikawa K., Kiss T., Izumi T., Shiohara Y., Yamada Y., Taneda T., Miyata S., Okumura K., Chikumoto N., Yamamoto A., Ibi A., Yoshizumi M., Tanabe K.

Development of High Ic Long REBCO Tapes with High Production Rate by PLD Method

Ключевые слова: HTS, REBCO, PLD process, high rate process, long conductors, fabrication, coated conductors, critical caracteristics, critical current density, thickness dependence, critical current, oxygenation treatments, homogeneity, experimental results

Physics Procedia, 2013, v.45, N 1, p.145-148

Полный текст на Sci-Hub

Дополнительная информация

Kikuchi A., Tsuchiya K., Takao T., Takeuchi T., Barzi E., Yamada R., Zlobin A.V., Nakamoto T., Yoshida M., Tomita K.

Feasibility Studies of 0.7 mm Nb3Al Strands and Rutherford Cable

Ключевые слова: LTS, Nb3Al, strands, Rutherford cables, critical current, n-value, magnetization, mechanical properties, hardness, critical current density, critical current, experimental results, stabilizing layers, geometry effects, NIMS

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.6001404

Полный текст на Sci-Hub

Дополнительная информация

Higashikawa K., Izumi T., Inoue M., Ohmatsu K., Konishi M., Okumura K., Yoshizumi M., Shiohara K., Katahira K.

Lateral Distribution of Critical Current Density in Coated Conductors Slit by Different Cutting Methods

Ключевые слова: HTS, REBCO, PLD process, coated conductors multifilamentary, fabrication, critical caracteristics, critical current density, distribution, measurement technique, Hall sensor, PLD process, experimental results, numerical analysis, REBCO, lateral effects

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.6602704

Полный текст на Sci-Hub

Дополнительная информация

Tomita M., Iwasa Y., Hahn S., Kim S.B., Voccio J., Kimoto T.

Study on optimization of YBCO thin film stack for compact NMR magnets

Ключевые слова: HTS, YBCO, coated conductors, stacked blocks, NMR magnet, portable unit, geometry effects, trapped field distribution, test results, flux density, distribution, conduction cooled systems

Physica C, 2013, v.484, N 1, p.295-299

Полный текст на Sci-Hub

Дополнительная информация

Noguchi S., Ueda H., Igarashi H., Oga Y., Itoh R.

Numerical simulation of screening current distribution in HTS tape of high field magnet

Ключевые слова: HTS, coated conductors, coils, YBCO, design parameters, numerical analysis, screening current, distribution, high field tests, critical caracteristics, current-voltage characteristics, critical current density, angular dependence, screen

Physica C, 2013, v.484, N 1, p.300-304

Полный текст на Sci-Hub

Дополнительная информация

Yokoyama K., Oka T., Kondo N., Hosaka S.

Pulsed-field magnetization of a bulk superconductor with small holes

Ключевые слова: HTS, REBCO, bulk, holes, pulsed magnetization, flux flow, trapped field distribution, flux density, magnetic field dependence, experimental results

Physica C, 2013, v.484, N 1, p.343-347

Полный текст на Sci-Hub

Дополнительная информация

Kamitani A., Takayama T.

Numerical Simulation of Permanent Magnet Method for Measuring Critical Current Density in Superconducting Film: Dominant Experimental Conditions for Crack Detection

Ключевые слова: measurement technique, films, HTS, critical caracteristics, critical current density, crack formation, magnets permanent, numerical analysis

Physics Procedia, 2013, v.45, N 1, p.173-176

Полный текст на Sci-Hub

Дополнительная информация

Nakamura T., Sohma M., Yamaguchi I., Kumagai T., Manabe T., Matsui H.

Enhanced Jc of MOD-YBCO Films by Modifying Surface States of CeO2 Buffer Layers on Sapphire Substrates

Ключевые слова: Hall effect, YBCO, films, substrate sapphire, MOD process, fabrication, surface, buffer layers, critical caracteristics, critical current density

Physics Procedia, 2013, v.45, N 1, p.177-180

Полный текст на Sci-Hub

Дополнительная информация

Lee H.G., Lee J.S., Song J.B., Yang D.G., Kang D.H., Kim Y.G., Park Y.J.

Effects of filter shapes on the capture efficiency of a superconducting high-gradient magnetic separation system

Ключевые слова: magnetic separation, magnets, gradient, flux density, magnetic flux distribution, HTS, REBCO, numerical analysis, experimental results

Superconductor Science Technology, 2013, v.26, N 8, p.85002

Полный текст на Sci-Hub

Дополнительная информация

Joo J., Kim S.B., Hayashi N., Yano Y.

Experimental and Analytical Studies on Non-Uniformity Properties of HTS Bulk Annuli for High Magnetic Performance Applications

Ключевые слова: HTS, REBCO, bulk, rings, stacked blocks, resistivity, critical caracteristics, current-voltage characteristics, MRI magnets, NMR magnet, magnetic field distribution, critical caracteristics, Jc/B curves, numerical analysis, current density, experimental results

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.4603004

Полный текст на Sci-Hub

Дополнительная информация

Nakamura T., Nagasaki Y., Funaki I., Ashida Y., Yamakawa H.

Conceptual Design of YBCO Coil With Large Magnetic Moment for Magnetic Sail Spacecraft

Ключевые слова: space application, HTS, YBCO, coated conductors, coils, design, transport currents, thermal stability, mechanical properties, stress effects, modeling, numerical analysis, design parameters, flux density, distribution, heat generation, temperature distribution, magnetic moment

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.4603405

Полный текст на Sci-Hub

Дополнительная информация

Yamada Y., Miyata S., Yamasaki H., Mawatari Y., Ibi A.

Nondestructive inductive measurement of local critical current densities and n-values in coated conductors

Ключевые слова: measurement technique, HTS, coated conductors, critical caracteristics, critical current density, local distribution, n-value, YBCO, current-voltage characteristics, angular dependence

Physica C, 2013, v.492, N 1, p.36-43

Полный текст на Sci-Hub

Дополнительная информация

Yokoyama K., Oka T., Kondo N., Hosaka S.

Experimental Verification of the Magnetic Flux Penetration Property and Flux Flow Inhibition Effect of a superconducting Bulk Magnet with Small Holes

Ключевые слова: HTS, REBCO, bulk, magnets, pulsed magnetization, penetration depth, flux flow, holes, flux density, magnetic field dependence, magnetic flux distribution, current distribution

Physics Procedia, 2013, v.45, N 1, p.261-264

Полный текст на Sci-Hub

Дополнительная информация

Ohsaki H., Morita M., Teshima H., Okajima N., Oura Y.

Trapped Flux and Current Density Distributions of a 140 mm Diameter Large Single-grain Gd-Ba-Cu-O Bulk Superconductor Fabricated with RE Compositional Gradient Method

Ключевые слова: HTS, REBCO, bulk, single grain, fabrication, trapped field, current density, distribution, experimental results

Physics Procedia, 2013, v.45, N 1, p.269-272

Полный текст на Sci-Hub

Дополнительная информация

Park S., Kim H., Kwon Y., Baik S.

Performance Analysis of a Superconducting Motor for Higher Efficiency Design

Ключевые слова: rotating machines, motors, shipboard applications, propulsion system, HTS, coils racetrack, design, Bi2223, design parameters, flux density, numerical analysis, efficiency

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.5202004

Полный текст на Sci-Hub

Дополнительная информация

Park H., Lee S., Kim S., Kim K., Park M., Jung S., Yu I., Kim G., Kim A., Park T., Sung H.

Design and Characteristic Analysis of a 10 kW Superconducting Synchronous Generator for Wind Turbines

Ключевые слова: wind farms application, rotating machines, generators, design, design parameters, HTS, REBCO, coated conductors, coils pancake, coils racetrack, numerical analysis, voltage waveforms, flux density, distribution, converters, turbine

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.5202405

Полный текст на Sci-Hub

Дополнительная информация

Rindfleisch M., Husband M., Smith A.C., Pei X., Zeng X.

Design, Build and Test of an AC Coil Using MgB2 Wire for Use in a Superconducting Machine

Ключевые слова: rotating machines, stators, MgB2/Cu-Ni, coils, design, fabrication, test results, flux density, distribution, quench current, ac losses, cryogenic systems

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.5202605

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Qiu M., Li H., Zhu J., Li Z., Ding K., Zhou Z.

Magnetic-Thermal Coupling Analysis of the Cold Dielectric High Temperature Superconducting Cable

Ключевые слова: power equipment, HTS, YBCO, coated conductors, cables coaxial, cables cold-dielectric, design parameters, flux density, temperature distribution, thermal performance, numerical analysis

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.5400404

Полный текст на Sci-Hub

Дополнительная информация

Abd-Shukor R., Agail A.

Transport current density of (Bi1.6Pb0.4)Sr2Ca2Cu3O10 superconductor added with different nano-sized ZnO

Ключевые слова: HTS, Bi2223, nanodoping, nanoscaled effects, bulk, fabrication, resistive transition, resistance, temperature dependence, critical caracteristics, critical current density, composition, microstructure

Applied Physics A, 2013, v.112, N 2, p.501-506

Полный текст на Sci-Hub

Дополнительная информация

Главная | Новости | Бюллетень | Конференции | Поиск публикаций в базе данных | Новое в базе данных
Российские организации | Энциклопедия | Цели сайта | Контакты | Полезные ссылки | Карта сайта | Помощь

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.