Вы запросили

Ключевые слова: design

Показаны 3921−3940 из 5433 < предыдущая 1 ... 195 196 197 198 199 ... 272 следующая > Показать все
Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Dente J.A., Costa Branco P.J., Almeida R.

On Using Meissner Effect to Conceive a New Linear Electromagnetic Launcher by Zero-Field-Cooling YBCO Bulk Superconductors

Ключевые слова: HTS, YBCO, bulk, Meissner effect, electromagnetic launch, electromagnetic forces, propulsion system, modeling, vehicle applications, design, prototype, friction, experimental results, new

IEEE TRANSACTIONS INDUSTRIAL ELECTRONICS, 2014, v.61, N 11, p.5894

Полный текст на Sci-Hub

Дополнительная информация

Bruzzone P.

Pre-conceptual studies and R&D for DEMO superconducting magnets

Ключевые слова: DEMO, magnets, forced flow conductor, coils toroidal, winding configurations, LTS, Nb3Sn, NbTi, coils wind-and-react, react-and-wind technique, design parameters, ITER, comparison, economic analysis

Fusion Engineering Design, 2014, v.89, N 7-8, p.1775-1778

Полный текст на Sci-Hub

Дополнительная информация

Goto T., Tamura H., Watanabe T., Tanaka T., Yanagi N., Takayama S., Sagara A., Miyazawa J., Sakamoto R., Yagi J.

Helical reactor design FFHR-d1 and c1 for steady-state DEMO

Ключевые слова: DEMO, helical winding, HTS, YBCO, coated conductors, design, supporting structure, neutron irradiation, design parameters, plans

Fusion Engineering Design, 2014, v.89, N 9-10, p.2114-2120

Полный текст на Sci-Hub

Дополнительная информация

Ito S., Hashizume H.

Design prospect of remountable high-temperature superconducting magnet

Ключевые слова: fusion magnets, HTS, joints, mechanical properties, joint resistances, heat transfer, REBCO, coated conductors, pressure dependence, coils helical, design, cryogenic systems, experimental results, high field magnets

Fusion Engineering Design, 2014, v.89, N 9-10, p.2241-2245

Полный текст на Sci-Hub

Дополнительная информация

Nakamura M., Hoshino K., Utoh H., Asakura N., Tobita K., Sakamoto Y., Someya Y.

Application of inter-linked superconducting coils for central solenoidand advanced divertor configuration of DEMO

Ключевые слова: DEMO, central coils, coils solenoidal, coils poloidal field, LTS, Nb3Al, strands, design, react-and-wind technique, mechanical properties, stress effects, design parameters, feeder, winding configurations, links, numerical analysis

Fusion Engineering Design, 2014, v.89, N 9-10, p.2456-2460

Полный текст на Sci-Hub

Дополнительная информация

Ohki Y.

Development of a RE-Ba-Cu-O Superconducting Current Lead

Ключевые слова: HTS, current leads, YBCO, coated conductors, fabrication, design parameters, experimental results

IEEE Electrical Insulation Magazine, 2014, v.30, N 5, p.43-45

Полный текст на Sci-Hub

Дополнительная информация

Xu Y., Izumi M., Maki N.

Electrical Design Study of 10-MW Salient-Pole Wind Turbine HTS Synchronous Generators

Ключевые слова: rotating machines, generators, wind farms application, design, coils racetrack, HTS, critical caracteristics, critical current, flux density, design parameters, REBCO, coated conductors, numerical analysis, turbine

IEEE Transactions Applied Superconductivity, 2014, v.24, N 6, p.5202706

Полный текст на Sci-Hub

Дополнительная информация

Tomsic M., Doll D., Baig T., Yao Z., Martens M.

Conduction cooled magnet design for 1.5 T, 3.0 T and 7.0 T MRI systems

Ключевые слова: MRI magnets, conduction cooled systems, design, MgB2, wires multifilamentary, LTS, Nb3Sn, comparison, critical caracteristics, Jc/B curves, magnetic field distribution

Superconductor Science Technology, 2014, v.27, N 12, p.125012

Полный текст на Sci-Hub

Дополнительная информация

Bobroff J., Azambourg F., Chambon C., Rodriguez V.

Design and Superconducting Levitation

Ключевые слова: levitation performance, design

Leonardo, 2014, v.47, N 5, p.474-479

Полный текст на Sci-Hub

Дополнительная информация

Lloberas J., A.Sumper, X.Granados M.S.

A review of high temperature superconductors for offshore wind power synchronous generators

Ключевые слова: rotating machines, generators, wind farms application, review, HTS, Bi2223, YBCO, tapes, coated conductors, coils, cryogenic systems, vacuum structure, economic analysis, design, design parameters

Renewable Sustainable Energy Reviews, 2014, v.308, N , p.404-414

Полный текст на Sci-Hub

Дополнительная информация

Chen Y., Yang X., Chen H., Wang T., Wang B., Gao Y., Xu F., Chen A., Hou Z., Peng Q., Wei X.

Design and test of a superconducting magnet in a linear accelerator for an Accelerator Driven Subcritical System

Ключевые слова: accelerator magnets, proton irradiation, test results, design, quench detection, coils solenoidal, correction coils, design parameters, magnetic flux distribution, high field magnets

Nuclear Instruments Methods in Physical Research A, 2014, v.764, N 1, p.220

Полный текст на Sci-Hub

Дополнительная информация

Wang H., Wang H., Li Y., Yan L., Wang Q., Dai Y., Hu X., Cheng J., Cui C., Gao F.

Torque Compensation System Design for a Spherical Superconducting Rotor

Ключевые слова: rotating machines, spheres, rotors, design, torque

IEEE Transactions Instrumentation Measurement, 2014, v.63, N 12, p.2789-2794

Полный текст на Sci-Hub

Дополнительная информация

Hekmati A.

Proposed optimization method for design of permanent magnet Guideways with high temperature superconductors

Ключевые слова: HTS, levitation performance, bulk, current distribution, modeling, numerical analysis, critical caracteristics, geometry effects, design, guidance

Iranian J Science Technology, 2014, v.38, N 2, p.133-144

Полный текст на Sci-Hub

Дополнительная информация

Kim H.M., Kim J.H., Park S.I., Le T.D.

3D electromagnetic design and electrical characteristics analysis of a 10-MW-class high-temperature superconducting synchronous generator for wind power

Ключевые слова: rotating machines, generators, wind farms application, HTS, coated conductors, magnetic field distribution, design parameters, coils racetrack, coils pancake, YGdBCO, critical caracteristics, Jc/B curves, current-voltage characteristics, losses, design, numerical analysis

Progress Superconductivity Cryogenics, 2014, v.16, N 2, p.47-53

Полный текст на Sci-Hub

Дополнительная информация

Kim H.M., Kim J.H., Park S.I., Le T.D.

Conceptual design of current lead for large scale high temperature superconducting rotating machine

Ключевые слова: HTS, rotating machines, design, conduction cooled systems, current leads, thermal properties

Progress Superconductivity Cryogenics, 2014, v.16, N 2, p.54-58

Полный текст на Sci-Hub

Дополнительная информация

Kim H.M., Yoon Y.S., Kim J.H., Yoon K.Y., Kim D.J., Lee D.H., Park S.I., Le T.D.

Analysis of losses within SMES system for compensating output fluctuation of wind power farm

Ключевые слова: power equipment, SMES, wind farms application, fluctuations, ac losses, distribution, eddy currents, design parameters, numerical analysis

Progress Superconductivity Cryogenics, 2014, v.16, N 4, p.57-61

Полный текст на Sci-Hub

Дополнительная информация

Lim S.-H., Han T.-H., Ko S.C.

Analysis on Current Limiting Characteristics According to the Influence of the Magnetic Flux for SFCL with Two Magnetic Paths

Ключевые слова: power equipment, FCL inductive, current limiting characteristics, critical caracteristics, current-voltage characteristics, numerical analysis, HTS, YBCO, thin films, design parameters, magnetic flux distribution, coils, experimental results

J Electrical Engineering Technology, 2014, v.9, N 6, p.1909-1913

Полный текст на Sci-Hub

Дополнительная информация

Fang J., Li D., Zhang X., Li W., Cao J.

Performance Evaluation of a Low-Speed Single-Side HTS Linear Induction Motor Used for Subway System

Ключевые слова: HTS, rotating machines, motors, Bi2223, prototype, design parameters, transport currents, flux density, eddy currents, losses, critical caracteristics, critical current, modeling, numerical analysis, experimental results

IEEE Electrical Insulation Magazine, 2014, v.50, N 5, p.8201109

Полный текст на Sci-Hub

Дополнительная информация

Ohashi S., Ueda N.

Influence of the Damper Coil System on the Levitation Characteristics in the Superconducting Magnetically Levitated System in Case of SC Coil Quenching

Ключевые слова: levitation performance, suspension, modeling, numerical analysis, quench, Maglev system, design parameters, rotating characteristics

IEEE Electrical Insulation Magazine, 2014, v.50, N 5, p.8300304

Полный текст на Sci-Hub

Дополнительная информация

Nagashima K., Ogata M., Mizuno K.

Fabrication of 5 T Magnet Using 2G Wires Directed at Maglev Application

Ключевые слова: HTS, coated conductors, magnets, Maglev system, coils pancake, design, fabrication, test results, critical caracteristics, critical current, angular dependence, design parameters, impregnation, n-value, current-voltage characteristics

IEEE Transactions Applied Superconductivity, 2013, v.23, N 3, p.3600104

Полный текст на Sci-Hub

Дополнительная информация

Главная | Новости | Бюллетень | Конференции | Поиск публикаций в базе данных | Новое в базе данных
Российские организации | Энциклопедия | Цели сайта | Контакты | Полезные ссылки | Карта сайта | Помощь

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.