Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: distribution
Показаны 3401−3420 из 4213	< предыдущая 1 ... 169 170 171 172 173 ... 211 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Gu C., Han Z., Zeng P., Qu T.-M., Huang K.-T., Xie P., Song P.

Fabrication and characterization of Ni-clad Bi-2223/Ag superconducting tapes

Ключевые слова: HTS, Bi2223/Ag/Ni, fabrication, tapes multifilamentary, PIT process, critical caracteristics, critical current, magnetic field distribution

Physica C, 2011, v.471, N 21-22, p.1103-1106

Полный текст на Sci-Hub

Дополнительная информация

Oh S.S., Ha D.W., Ochiai S., Okuda H., Shin J.K., Fujimoto M.

A Monte Carlo simulation on critical current distribution of bent-damaged multifilamentary Bi2223 composite tape

Ключевые слова: HTS, Bi2223/Ag, tapes multifilamentary, composites, mechanical properties, bending process, critical caracteristics, critical current, current distribution, modeling, experimental results, damage mechanisms

Physica C, 2011, v.471, N 21-22, p.1114-1118

Полный текст на Sci-Hub

Дополнительная информация

Lee S., Lee B., Yoon J., Yang B.

Modeling of a 22.9 kV 50 MVA superconducting power cable based on PSCAD/EMTDC for application to the Icheon substation in Korea

Ключевые слова: HTS, coated conductors, cables three-in-one, YBCO, design parameters, modeling, current distribution, power equipment

Physica C, 2011, v.471, N 21-22, p.1283-1289

Полный текст на Sci-Hub

Дополнительная информация

Watanabe T., Tsuda M., Hamajima T., Hu N., Toda M.

Recovery time analysis in a tri-axial HTS cable after an over-current fault

Ключевые слова: HTS, cables triaxial, power equipment, overcurrent, recovery characteristics, heat transfer, modeling computational, numerical analysis, temperature distribution

Physica C, 2011, v.471, N 21-22, p.1295-1299

Полный текст на Sci-Hub

Дополнительная информация

Sun J., Yamaguchi S., Hamabe M., Watanabe H., Kawahara T., Ivanov Y.

Circulation pump power for 200 m cable experiment

Ключевые слова: HTS, Bi2223, cables, dc performance, power equipment, temperature distribution, thermal loads, pressure drop, cryogen transfer line, cryogenic pumps, experimental results

Physica C, 2011, v.471, N 21-22, p.1308-1312

Полный текст на Sci-Hub

Дополнительная информация

Sun J., Yamaguchi S., Hamabe M., Watanabe H., Sugino M., Kawahara T., Yamauchi S.

Critical current measurements for design of superconducting DC transmission power cable

Ключевые слова: cables, dc performance, critical caracteristics, DI-Bi2223/Ag, tapes, current-voltage characteristics, magnetic flux distribution, experimental results, power equipment

Physica C, 2011, v.471, N 21-22, p.1313-1316

Полный текст на Sci-Hub

Дополнительная информация

Lee B.W., Lee S.H., Oh S.H., Shin W.J., Seong J.K., Khan U.A.

Feasibility analysis of the application and positioning of DC HTS FCL in a DC microgrid through modeling and simulation using Simulink and SimPowerSystem

Ключевые слова: HTS, FCL resistive, dc performance, power equipment, power distribution system, modeling

Physica C, 2011, v.471, N 21-22, p.1322-1326

Полный текст на Sci-Hub

Дополнительная информация

Lim S.H., Kim J.S., Kim J.C.

Analysis on fault current limiting and bus-voltage sag suppressing operations of SFCLs using magnetic coupling of two coils according to their application locations in a power distribution system

Ключевые слова: power equipment, power distribution system, FCL inductive, fault currents, coils, modeling computational, numerical analysis, design parameters, current waveforms

Physica C, 2011, v.471, N 21-22, p.1358-1363

Полный текст на Sci-Hub

Дополнительная информация

Seong K.C., Kim S.H., Koh D.Y., Yeom H.K., Ko J.S., Kim H.B., Hong Y.J.

Structural design of the toroidal configuration of the HTS SMES cooling system

Ключевые слова: power equipment, SMES, HTS, coils toroidal, cryogenic systems, conduction cooled systems, coils pancake, YBCO, coated conductors, design parameters, design, temperature distribution, mechanical properties, deformation, stress effects, thermal performance

Physica C, 2011, v.471, N 21-22, p.1390-1394

Полный текст на Sci-Hub

Дополнительная информация

Tominaka T.

Current distribution calculation for a superconducting multi-layered power cable

Ключевые слова: power equipment, cables coaxial, multilayered structures, current distribution, numerical analysis, inductance, helical winding, HTS, tapes

Cryogenics, 2011, v.51, N 11-12, p.630-634

Полный текст на Sci-Hub

Дополнительная информация

Nagaya S., Takahashi T., Hirano N., Tsuda M., Hamajima T., Shikimachi K., Atomura N., Chiba Y.

Homogeneous current distribution experiment in a multi-laminated HTS tape conductor for a double-pancake coil of SMES

Ключевые слова: SMES, power equipment, coils pancake, HTS, tapes, multilayered structures, laminations, current distribution, numerical analysis, experimental results, YBCO, coated conductors

Physica C, 2011, v.471, N 21-22, p.1395-1398

Полный текст на Sci-Hub

Дополнительная информация

Watanabe K., Seong K.C., Kim S., Park M., Kim A.R., Yu I.K., Kim J.G.

A feasibility study on HTS SMES applications for power quality enhancement through both software simulations and hardware-based experiments

Ключевые слова: power equipment, SMES, HTS, modeling, coils toroidal, Bi2223, tapes, current distribution, design parameters, experimental results, quality control

Physica C, 2011, v.471, N 21-22, p.1404-1408

Полный текст на Sci-Hub

Дополнительная информация

Bae J.H., Kim S., Kim H.M., Ha D.W., Sohn M.H., Choi S., Sim K.D., Park H.Y., Eom B.Y.

Fabrication and test results of HTS magnet for a superconducting property measurement system

Ключевые слова: HTS, magnets, measurement setup, fabrication, test results, conduction cooled systems, DI-Bi2223/Ag, tapes, design parameters, magnetic field distribution, cooling technology

Physica C, 2011, v.471, N 21-22, p.1449-1453

Полный текст на Sci-Hub

Дополнительная информация

Tomita M., Iwasa Y., Joo J.H., Hahn S., Imai M., Kim S.B., Yano Y., Kimoto T.

The characteristics of spatial homogeneity and strength of magnetic field for compact NMR magnets using stacked HTS bulks with various gap lengths

Ключевые слова: HTS, bulk, REBCO, NMR magnet, geometry effects, magnetic field distribution, homogeneity, numerical analysis, experimental results, fabrication, length

Physica C, 2011, v.471, N 21-22, p.1454-1458

Полный текст на Sci-Hub

Дополнительная информация

Zhang W., Fang J., Zhao J., Zheng T.Q., Liu Y.M.

Influence analysis of structural parameters on electromagnetic properties of HTS linear induction motor

Ключевые слова: rotating machines, motors, HTS, Bi2223/Ag, tapes, numerical analysis, magnetic field distribution, design parameters, critical caracteristics, critical current, electromagnetic forces, modeling, experimental results

Physica C, 2011, v.471, N 21-22, p.1474-1478

Полный текст на Sci-Hub

Дополнительная информация

Ko T.K., Yoon Y.S., Lee C.Y., Chung Y.D., Jang J.Y.

Theoretical and FEM analysis of suspension and propulsion system with HTS hybrid electromagnets in an EMS Maglev model

Ключевые слова: Maglev system, modeling, propulsion system, suspension, magnets, hybrid systems, numerical analysis, HTS, coils, Bi2223/Ag, tapes, magnetic flux distribution, levitation performance

Physica C, 2011, v.471, N 21-22, p.1487-1491

Полный текст на Sci-Hub

Дополнительная информация

Bae D.K., Ko T.K., Choi S., Lee C.Y., Chang K.S., Kim Y.J., Na J.B., Chu S.Y., Hwang Y.J.

Design, manufacture and performance evaluation of HTS electromagnets for the hybrid magnetic levitation system

Ключевые слова: levitation performance, hybrid systems, HTS, Bi2223/Ag, magnets, Maglev system, fabrication, design parameters, suspension, magnetic field distribution, coils pancake, critical caracteristics, current-voltage characteristics, current waveforms, voltage waveforms

Physica C, 2011, v.471, N 21-22, p.1501-1505

Полный текст на Sci-Hub

Дополнительная информация

Ogawa J., Hayashi H., Fukui S., Sato T., Yokoyama K., Oka T., Fujishiro H., Ooizumi M., Seki H., Stiehler C., Kimura T., Mimura D.

Magnetic separation technique for groundwater by five HTS melt-processed bulk magnets arranged in a line

Ключевые слова: magnetic separation, HTS, bulk, trapped field magnets, REBCO, trapped field distribution, experimental results

Physica C, 2011, v.471, N 21-22, p.1506-1510

Полный текст на Sci-Hub

Дополнительная информация

Kovac P., Pitel J.

On some consequences of an external magnetic field applied to HTS coils

Ключевые слова: HTS, coils, Bi2223/Ag, tapes, numerical analysis, critical caracteristics, critical current distribution, n-value, magnetic field distribution, electric field distribution

Physica C, 2011, v.471, N 23-24, p.1680-1688

Полный текст на Sci-Hub

Дополнительная информация

Gozzelino L., Zilberti L., Chiampi M., Manzin A.

Thin-Shell Formulation Applied to Superconducting Shields for Magnetic Field Mitigation

Ключевые слова: shields, modeling, numerical analysis, geometry effects, magnetic flux distribution, MgB2

IEEE Transactions on Magnetics, 2011, v.47, N 10, p.4266-4269

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: distribution

Fabrication and characterization of Ni-clad Bi-2223/Ag superconducting tapes

A Monte Carlo simulation on critical current distribution of bent-damaged multifilamentary Bi2223 composite tape

Modeling of a 22.9 kV 50 MVA superconducting power cable based on PSCAD/EMTDC for application to the Icheon substation in Korea

Recovery time analysis in a tri-axial HTS cable after an over-current fault

Circulation pump power for 200 m cable experiment

Critical current measurements for design of superconducting DC transmission power cable

Feasibility analysis of the application and positioning of DC HTS FCL in a DC microgrid through modeling and simulation using Simulink and SimPowerSystem

Analysis on fault current limiting and bus-voltage sag suppressing operations of SFCLs using magnetic coupling of two coils according to their application locations in a power distribution system

Structural design of the toroidal configuration of the HTS SMES cooling system

Current distribution calculation for a superconducting multi-layered power cable

Homogeneous current distribution experiment in a multi-laminated HTS tape conductor for a double-pancake coil of SMES

A feasibility study on HTS SMES applications for power quality enhancement through both software simulations and hardware-based experiments

Fabrication and test results of HTS magnet for a superconducting property measurement system

The characteristics of spatial homogeneity and strength of magnetic field for compact NMR magnets using stacked HTS bulks with various gap lengths

Influence analysis of structural parameters on electromagnetic properties of HTS linear induction motor

Theoretical and FEM analysis of suspension and propulsion system with HTS hybrid electromagnets in an EMS Maglev model

Design, manufacture and performance evaluation of HTS electromagnets for the hybrid magnetic levitation system

Magnetic separation technique for groundwater by five HTS melt-processed bulk magnets arranged in a line

On some consequences of an external magnetic field applied to HTS coils

Thin-Shell Formulation Applied to Superconducting Shields for Magnetic Field Mitigation