Tsuchiya K., Mito T., Yoshida K., Chikaraishi H., Takahata K., Kamiya K., Imagawa S., Kizu K., Murakami H., Obana T., Natsume K., Hamaguchi S., Ichige T., Koide Y., Furukawa M.
Ключевые слова: Tokamak, central coils, Nb3Sn, coils solenoidal, joints, termination, current leads, LTS, NbTi, feeder, design, supporting structure, high field magnets
Tsuchiya K., Yoshida K., Takahata K., Kizu K., Murakami H., Obana T., Natsume K., Hamaguchi S., Koide Y.
Ключевые слова: LTS, NbTi, Tokamak, high field magnets, joint resistances, joints, feeder, coils poloidal field, coils toroidal, design parameters, termination, self-field effect, distribution, fatigue behavior
Ключевые слова: power equipment, cables, joints, feeder, bus bar conductor, welding, fabrication
Mitchell N., Chen Y., Devred A., Song Y., Huang X., Clayton N., Liu C., Gung C., Cheng Y., Ding K., Lu K., Shen G., Feng H., Yu X., Sato N., Niu E., Pierre B.
Ключевые слова: ITER, feeder, China, review, status, HTS, current leads, joints, thermal properties, shields
Mitchell N., Ilyin Y., Chen Y., Devred A., Clayton N., Beemsterboer C., Lorriere P., Farek J., Bangui G., Man S., Naoyuki S., Gung C.-.
Ключевые слова: mechanical properties, LTS, NbTi, supporting structure, joints, design, ITER, magnetic systems, bus bar conductor, feeder, stress effects
Ключевые слова: ITER, feeder, insulation, reinforcement, mechanical properties, measurement technique, stress effects, shear strength
Ключевые слова: magnets, feeder, discharge characteristics, insulation
Ключевые слова: railway applications, dc performance, feeder, modeling, numerical analysis, cables, power equipment
Ключевые слова: ITER, coils toroidal, joints, LTG process, Nb3Sn, cable-in-conduit conductor, feeder, NbTi, design parameters, modeling
Mitchell N., Bi Y., Bauer P., Devred A., Song Y., Sahu A.K., Lu K., Rodriguez-Mateos F., Dolgetta N., Gung C.Y., Ilin I.
Ключевые слова: feeder, ITER, helium supercritical, cryogenic systems, design, design parameters
Mitchell N., Bauer P., Ilyin Y., Chen Y., Zhou T., Devred A., Song Y., Sahu A.K., Lu K., Rodriguez-Mateos F., Knaster J., Dolgetta N., Nannini M., Gung C.Y., Lorriere P.
Ключевые слова: feeder, ITER, current leads, HTS, bus bar conductor, Bi2223, installation, supporting structure, quench detection, cryogenic systems
Mitchell N., Bauer P., Devred A., Clayton N., Sahu A.K., Dolgetta N., Gung C.Y., Prasad K., Mahadevappa V.
Ключевые слова: feeder, ITER, design, helium supercritical, vacuum structure, thermal performance, heat loads, modeling
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Gung C., Cheng Y., Ding K., Lu K., Shen G., Sahu A., Jong C., Dolgetta N., Ilin Y.
Ключевые слова: feeder, ITER, design, fabrication, termination, vacuum structure, cryostat
Tsuchiya K., Zani L., Yoshida K., Heller R., Kamiya K., Kizu K., Murakami H., Peyrot M., Barabaschi P., Michel F., Wanner M.
Mitchell N., Xi W., Bauer P., Zheng J., Zhou T., Devred A., Song Y., Huang X., Gung C., Ding K., Lu K., Niu E., Pan W., Tao Y.
Ключевые слова: ITER, feeder, high voltage process, insulation, test results
Mitchell N., Bauer P., Ilyin Y., Chen Y., Devred A., Gung C., Jong C., Nannini M., Lorriere P., Farek J.
Ключевые слова: ITER, feeder, magnetic systems, modeling, mechanical properties
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.