Вы запросили

Ключевые слова: modeling

Показаны 2601−2620 из 4747 < предыдущая 1 ... 129 130 131 132 133 ... 238 следующая > Показать все
Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Campbell A.M.

A finite element calculation of flux pumping

Ключевые слова: flux jumps, numerical analysis, modeling

Superconductor Science Technology, 2017, v.30, N 12, p.125015

Полный текст на Sci-Hub

Дополнительная информация

Wang J., Deng Z., Ma G., Ye C., Liu K.

Design Optimization of a Heavy-Load High-Temperature Superconducting Maglev System With Multiseeded YBaCuO Bulks

Ключевые слова: HTS, YBCO, bulk, Maglev system, design, modeling, numerical analysis, levitation performance

IEEE Transactions Applied Superconductivity, 2017, v.27, N 8, p.3602208

Полный текст на Sci-Hub

Дополнительная информация

Doukas D.I., Chrysochos A.I., Papadopoulos T.A., Labridis D.P., Harnefors L., Velotto G.

Coupled Electro-Thermal Transient Analysis of Superconducting DC Transmission Systems Using FDTD and VEM Modeling

Ключевые слова: power transmission lines, modeling, dc performance, electro-thermal model, transient performance, HTS, cables in separated cryostat, YBCO, coated conductors, temperature distribution, numerical analysis

IEEE Transactions Applied Superconductivity, 2017, v.27, N 8, p.5401608

Полный текст на Sci-Hub

Дополнительная информация

Rajbongshi R., Saikia L.C.

Performance of coordinated FACTS and energy storage devices in combined multiarea ALFC and AVR system

Ключевые слова: SMES, control systems, renewable energy systems, modeling, review

J Renewable Sustainable Energy, 2017, v.9, N 6, p.64101

Полный текст на Sci-Hub

Дополнительная информация

Sosa V.

Levitation forces between a finite rectangular superconductor and a spherical magnet

Ключевые слова: modeling, levitation performance, HTS, YBCO, bulk, disks, magnets permanent, spheres, numerical analysis, trapped field

Revista Mexicana Fisica, 2017, v.63, N 6, p.497-504

Полный текст на Sci-Hub

Дополнительная информация

Smolentsev N.I., Kondrin S.A., Glmetdinov M.F., Kazantsev A.M., Sirekanyan V.V., Bondarev Y.L., Chetoshnikova L.M.

Superconducting electrokinetic storage for energy saving and energy enhancement in local electric networks

Ключевые слова: power equipment, flywheel energy storage systems, modeling, HTS

Advanced Engineering Recearch, 2017, v.133, N , p.233-238

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Yong H., Liu D.

Analysis of charging and sudden-discharging characteristics of no-insulation REBCO coil using an electromagnetic coupling model

Ключевые слова: HTS, REBCO, coated conductors, coils pancake, insulationless, discharge characteristics, modeling, numerical analysis, magnetic field distribution, critical caracteristics, current-voltage characteristics

AIP Advances, 2017, v.7, N 11, p.115104

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Yong H., Huang C.

Influence of movement direction on levitation performance and energy dissipation in a superconducting maglev system

Ключевые слова: Maglev system, levitation performance, dissipative properties, modeling, numerical analysis, power losses

AIP Advances, 2017, v.7, N 11, p.115305

Полный текст на Sci-Hub

Дополнительная информация

Brown T., El-Guebaly L., Davis A., Harb M., Menard J.

ST-Based Fusion Nuclear Science Facility: Breeding Issues and Challenges of Protecting HTS Magnets

Ключевые слова: HTS, fusion magnets, protective system, spheres, Tokamak, neutron irradiation, modeling, shielding effects, design parameters, facility

Fusion Science Technology, 2017, v.72, N 3, p.354-361

Полный текст на Sci-Hub

Дополнительная информация

Zhai Y., d’Hauthuille L.

Numerical Stress Analysis during Cooldown and Compressive Loading in an Imperfect Nb3Sn Wire

Ключевые слова: LTS, Nb3Sn, wires multifilamentary, numerical analysis, mechanical properties, stress effects, cooling technology, compression, loads, modeling, thermal expansion, porosity, thermal strain, stress effects

Fusion Science Technology, 2017, v.72, N 3, p.434-438

Полный текст на Sci-Hub

Дополнительная информация

Zanino R., Turtu S., Muzzi L., Corato V., Bonifetto R., Savoldi L., Brighenti A., Zappatore A.

Quench Propagation in a TF Coil of the EU DEMO

Ключевые слова: DEMO, coils toroidal, quench propagation, fusion magnets, Europe, design parameters, modeling, numerical analysis, hot spots, temperature distribution

Fusion Science Technology, 2017, v.72, N 3, p.439-448

Полный текст на Sci-Hub

Дополнительная информация

Nishimura A., Nakamura M., Miyoshi Y., Katayama K., Homma Y., Kudo H., Utoh H., Asakura N., Tobita K., Sakamoto Y., Someya Y., Hiwatari R., Tokunaga S., Aoki A.

Design Strategy and Recent Design Activity on Japan’s DEMO

Ключевые слова: DEMO, Japan, design, fusion magnets, design parameters, modeling, comparison, coils toroidal, divertor, irradiation effects, fusion

Fusion Science Technology, 2017, v.72, N 4, p.537-545

Полный текст на Sci-Hub

Дополнительная информация

Zhu J., Bykov V., Fellinger J., Wegener L., Carls A., Eeten P.v., Bosch H.-S.

Engineering Challenges of W7-X: Improvement of Numerical Modeling and Mechanical Monitoring After lo and First Phase of Operation

Ключевые слова: stellarator, operational performance, numerical analysis, modeling, test long-term operation, sensors, mechanical properties, contact characteristics, status

Fusion Science Technology, 2017, v.72, N 4, p.546-558

Полный текст на Sci-Hub

Дополнительная информация

Caspi S., Wang X., Sabbi G., Arbelaez D., Prestemon S.O., Shen T.

Strain Distribution in REBCO-Coated Conductors Bent With the Constant-Perimeter Geometry

Ключевые слова: HTS, REBCO, coated conductors, mechanical properties, strain effects, distribution, bending radius, bending process, helical winding, magnets dipole, magnets quadrupole, geometry effects, sample shapes, modeling, numerical analysis, transverse stress

IEEE Transactions Applied Superconductivity, 2017, v.27, N 8, p.6604010

Полный текст на Sci-Hub

Дополнительная информация

Watanabe K., Suzuki E., Sasakawa T., Yonezu T.

Study on Electromagnetic Force Characteristics Acting on Levitation/Guidance Coils of a Superconducting Maglev Vehicle System

Ключевые слова: Maglev system, levitation performance, electromotive force, coils, suspension, displacements, numerical analysis, modeling, design parameters

IEEE Transactions on Magnetics, 2017, v.53, N 11, p.8300605

Полный текст на Sci-Hub

Дополнительная информация

Barzegar-Bafrooei M.R., Foroud A.A.

Impact of fault resistance and fault distance on fault current reduction ratio of hybrid SFCL

Ключевые слова: power equipment, hybrid systems, HTS, FCL resistive, FCL inductive, comparison, resistance, geometry effects, fault currents, modeling, current waveforms, numerical analysis

International Transactions Electrical Energy Systems, 2017, v.27, N 11, p.2409

Полный текст на Sci-Hub

Дополнительная информация

Asadi A.H., Meyar-Naimi H.M., Jahangiri A.

A new controlled superconducting magnetic energy storage for dynamic stabilization of distributed generation in islanding mode of operation

Ключевые слова: power equipment, SMES, power distribution system, control systems, stability, modeling, numerical analysis, power reactive, coils, dynamic operation, new

International Transactions Electrical Energy Systems, 2017, v.27, N 11, p.2418

Полный текст на Sci-Hub

Дополнительная информация

Zheng X., Jin Z., Lv C., Tai N.

Research on application of superconducting fault current limiter in MMC-MTDC

Ключевые слова: power equipment, FCL resistive, converters, current limiting characteristics, modeling, numerical analysis

J Engineering, 2017, v., N , p.1-5

Полный текст на Sci-Hub

Дополнительная информация

Elsisi M., Soliman M., Aboelela M.A., Mansour W.

Optimal design of model predictive control with superconducting magnetic energy storage for load frequency control of nonlinear

Ключевые слова: SMES, control systems, modeling, numerical analysis, nonlinear effects

J Energy Storage, 2017, v.12, N , p.311-318

Полный текст на Sci-Hub

Дополнительная информация

Xia D., Xia Z.

Study on the adjustment capability of the excitation system located inside superconducting machine electromagnetic shield

Ключевые слова: rotating machines, excitation system, shielding effects, modeling, numerical analysis, flux density, distribution, generators, eddy currents

IOP Conference Series: Materials Science Engineering, 2017, v.279, N 1, p.12016

Полный текст на Sci-Hub

Дополнительная информация

Главная | Новости | Бюллетень | Конференции | Поиск публикаций в базе данных | Новое в базе данных
Российские организации | Энциклопедия | Цели сайта | Контакты | Полезные ссылки | Карта сайта | Помощь

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.