Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: modeling
Показаны 3241−3260 из 4747	< предыдущая 1 ... 161 162 163 164 165 ... 238 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Leveque J., Douine B., Berger K., Sirois F., Kameni A., Bonnard C.

Determination of Jc and n-Value of HTS Pellets by Measurement and Simulation of Magnetic Field Penetration

Ключевые слова: HTS, YBCO, bulk, cylinders, penetration depth, diffusion process, critical caracteristics, measurement technique, n-value, modeling, numerical analysis, critical current distribution, experimental results

IEEE Transactions Applied Superconductivity, 2015, v.25, N 4, p.8001008

Полный текст на Sci-Hub

Дополнительная информация

Matsushita T., Otabe E.S., Kiuchi M., Vyatkin V.S.

Design of Practical Superconducting DC Power Cable With REBCO Coated Conductors

Ключевые слова: HTS, REBCO, coated conductors, power equipment, cables, dc performance, design, critical caracteristics, angular dependence, critical current density, twisting, modeling, numerical analysis

IEEE Transactions Applied Superconductivity, 2015, v.25, N 4, p.6606207

Полный текст на Sci-Hub

Дополнительная информация

Xu Y., Shi J., Zhou S., Li J., Tang Y., Liu Y., Ren L., He Q., Jin T., Dai Q., Deng J.

An evaluation method for small-scale conduction cooled SMES cryogenic cooling system based on thermal analysis

Ключевые слова: power equipment, SMES, cryogenic systems, model small-scale, conduction cooled systems, modeling, numerical analysis, HTS, Bi2223, coils solenoidal, design parameters, ac losses, eddy currents, temperature rise , cryocoolers

Cryogenics, 2015, v.71, N , p.30-38

Полный текст на Sci-Hub

Дополнительная информация

Lee S., Wei S.

Comparison analysis of superconducting solenoid magnet systems for ECR ion source based on the evolution strategy optimization

Ключевые слова: cyclotron, magnetic systems, coils solenoidal, ion sources, design, geometry effects, modeling

Progress Superconductivity Cryogenics, 2015, v.17, N 2, p.36-40

Полный текст на Sci-Hub

Дополнительная информация

Grilli F., Xu Z.

Modelling ac ripple currents in HTS coated conductors

Ключевые слова: HTS, coated conductors, modeling, ac losses, numerical analysis, critical caracteristics, current density, distribution, width, ripple

Superconductor Science Technology, 2015, v.28, N 10, p.104002

Полный текст на Sci-Hub

Дополнительная информация

Guzman-Arriaga J.R., Gonzalez-Montanez F.J., Escarela-Perez R., Olivares-Galvan J.C., Jimenez-Mondragon V.M.

Numerical Modeling of the Thomson Ring in Stationary Levitation Using FEM-Electrical Network and Newton-Raphson

Ключевые слова: bulk, rings, levitation performance, modeling, numerical analysis, LTS, new

Ingenieria Investigacion Tecnologia, 2015, v.16, N 3, p.431-439

Полный текст на Sci-Hub

Дополнительная информация

Wu H., Liu X.F., Zheng J.X., Du S.S.

Conceptual Design and Analysis of CFETR TF Coil

Ключевые слова: Tokamak, coils toroidal, design, modeling, numerical analysis, high field magnets

J Fusion Energy, 2015, v.34, N 4, p.1027-1032

Полный текст на Sci-Hub

Дополнительная информация

Kim J., Kim J., Lee S., Kim S., Park M., Sim K., Yu I., Ha S.

RTDS-based Model Component Development of a Tri-axial HTS Power Cable and Transient Characteristic Analysis

Ключевые слова: power equipment, cables triaxial, modeling, numerical analysis, design parameters, HTS, YBCO, coated conductors, thermal properties, fault currents, resistance

J Electrical Engineering Technology, 2015, v.10, N 5, p.2083

Полный текст на Sci-Hub

Дополнительная информация

Fang J., Li S., Chen D., Jia C.

Transport ac loss of elliptical thin strips with a power-law E(J) relation

Ключевые слова: ac losses, numerical analysis, strips, current-voltage characteristics, modeling computational, transport currents

Superconductor Science Technology, 2015, v.28, N 10, p.105010

Полный текст на Sci-Hub

Дополнительная информация

Lee H.G., Hahn S., Kim K.L., Yang D.G., Kim Y.G.

Design consideration and optimization procedure for a no-insulation multi-width REBCO magnet

Ключевые слова: HTS, GdBCO, coated conductors, magnets, insulationless, design parameters, modeling, nucleation, magnetic field distribution, critical current distribution, critical caracteristics, winding configurations, width

Current Applied Physics, 2015, v.15, N 10, p.1134

Полный текст на Sci-Hub

Дополнительная информация

Mora M., Badia-Majos A.B., Aliaga A., Letosa J., Pena J.

Trade-off modeling of superconducting levitation machines: theory and experiment

Ключевые слова: levitation performance, modeling, critical state model, numerical analysis, experimental results, HTS, YBCO, bulk, magnets permanent

IEEE Transactions Applied Superconductivity, 2015, v.25, N 4, p.3601810

Полный текст на Sci-Hub

Дополнительная информация

Zhilichev Y.

Modeling of Critical Currents by a Moving Front Method

Ключевые слова: critical caracteristics, modeling, bulk, rings, critical current density, trapped field, MgB2, hysteresis, cylinders

IEEE Transactions Applied Superconductivity, 2015, v.25, N 4, p.8001207

Полный текст на Sci-Hub

Дополнительная информация

Schwartz J., Chan W.K., Phillips M.R.

Enhanced Quench Protection in REBa2Cu3O7-d-Based Coils by Enhancing Three-Dimensional Quench Propagation via Thermally Conducting Electrical Insulation

Ключевые слова: HTS, REBCO, coated conductors, modeling, coils, quench protection, quench propagation, insulating medium, thermal conductivity, specific heat, minimum quench energy, hot spots, normal zone propagation, current sharing, temperature distribution

IEEE Transactions Applied Superconductivity, 2015, v.25, N 5, p.4701411

Полный текст на Sci-Hub

Дополнительная информация

Schwartz J., Sun Z., Gou X.

A Three-Dimensional Fractal-Based Study of the Effects of the Complex Interface Between Bi 2Sr 2CaCu 2O x Filaments and the Ag Matrix on the Mechanical Behavior of Composite Round Wires

Ключевые слова: HTS, Bi2212, matrix, interfaces, composites, wires round, mechanical properties, microstructure, modeling, stress effects, strain effects, stress distribution, local distribution

IEEE Transactions Applied Superconductivity, 2015, v.25, N 5, p.6400808

Полный текст на Sci-Hub

Дополнительная информация

Weinstein R., Parks D., Sawh R., Davey K., Carpenter K.

A significant advantage for trapped field magnet applications—A failure of the critical state model

Ключевые слова: bulk, single grain, pulsed magnetization, experimental results, trapped field distribution, trapped field magnets, modeling, critical state model, HTS, YBCO, failure analysis

Applied Physics Letters, 2015, v.107, N 15, p.152601

Полный текст на Sci-Hub

Дополнительная информация

Hearn C.S., Pratapa S.

3-D Transient Modeling of Bulk High-Temperature Superconducting Material in Passive Magnetic Bearing Applications

Ключевые слова: bearing magnetic, modeling, HTS, YBCO, bulk, disks, mechanical properties, stiffness, transverse stress, numerical analysis, experimental results

IEEE Transactions Applied Superconductivity, 2015, v.25, N 5, p.5203910

Полный текст на Sci-Hub

Дополнительная информация

Li Q., Solovyov V.F., Zhang X., Dimitrov I.K., Chubar O.

Rapid and Semi-analytical Design and Simulation of a Toroidal Magnet Made With YBCO and MgB2 Superconductors

Ключевые слова: HTS, YBCO, coated conductors, MgB2, wires, magnets, coils toroidal, design, SMES, geometry effects, magnetic field distribution, numerical analysis, modeling computational, design, comparison

IEEE Transactions Applied Superconductivity, 2015, v.25, N 5, p.5701208

Полный текст на Sci-Hub

Дополнительная информация

Xu Y., Shi J., Wang Z., Tang Y., Liu Y., Ren L., Shi X., Yan S., Deng J.

Status Evaluation Method for SMES Used in Power Grid

Ключевые слова: power equipment, SMES, thermal stability, HTS, Bi2223, tapes, design parameters, coils solenoidal, coils pancake, magnets, modeling, numerical analysis

IEEE Transactions Applied Superconductivity, 2015, v.25, N 5, p.5701310

Полный текст на Sci-Hub

Дополнительная информация

Kanchanaharuthai A., Chankong V., Loparo K.A.

Nonlinear generator excitation and superconducting magnetic energy storage control for transient stability enhancement via immersion and invariance

Ключевые слова: SMES, control systems, power equipment, design, stability, modeling, numerical analysis, nonlinear effects

Transactions Inst Measurement Control, 2015, v.37, N 10, p.1217

Полный текст на Sci-Hub

Дополнительная информация

Shawyer R.

Second generation EmDrive propulsion applied to SSTO launcher and interstella rprobe

Ключевые слова: propulsion system, HTS, coatings, YBCO, space application, modeling, design, cavity

Acta Astronautica, 2015, v.116, N , p.166-174

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: modeling

Determination of Jc and n-Value of HTS Pellets by Measurement and Simulation of Magnetic Field Penetration

Design of Practical Superconducting DC Power Cable With REBCO Coated Conductors

An evaluation method for small-scale conduction cooled SMES cryogenic cooling system based on thermal analysis

Comparison analysis of superconducting solenoid magnet systems for ECR ion source based on the evolution strategy optimization

Modelling ac ripple currents in HTS coated conductors

Numerical Modeling of the Thomson Ring in Stationary Levitation Using FEM-Electrical Network and Newton-Raphson

Conceptual Design and Analysis of CFETR TF Coil

RTDS-based Model Component Development of a Tri-axial HTS Power Cable and Transient Characteristic Analysis

Transport ac loss of elliptical thin strips with a power-law E(J) relation

Design consideration and optimization procedure for a no-insulation multi-width REBCO magnet

Trade-off modeling of superconducting levitation machines: theory and experiment

Modeling of Critical Currents by a Moving Front Method

Enhanced Quench Protection in REBa2Cu3O7-d-Based Coils by Enhancing Three-Dimensional Quench Propagation via Thermally Conducting Electrical Insulation

A Three-Dimensional Fractal-Based Study of the Effects of the Complex Interface Between Bi 2Sr 2CaCu 2O x Filaments and the Ag Matrix on the Mechanical Behavior of Composite Round Wires

A significant advantage for trapped field magnet applications—A failure of the critical state model

3-D Transient Modeling of Bulk High-Temperature Superconducting Material in Passive Magnetic Bearing Applications

Rapid and Semi-analytical Design and Simulation of a Toroidal Magnet Made With YBCO and MgB2 Superconductors

Status Evaluation Method for SMES Used in Power Grid

Nonlinear generator excitation and superconducting magnetic energy storage control for transient stability enhancement via immersion and invariance

Second generation EmDrive propulsion applied to SSTO launcher and interstella rprobe