Mito T., Chikaraishi H., Takahata K., Imagawa S., Kizu K., Murakami H., Obana T., Natsume K., Hamaguchi S.
Ключевые слова: LTS, Nb3Sn, cable-in-conduit conductor, coils pancake, electromagnetic forces, Tokamak, central coils, cooling technology, compression, test results, deformation
Ключевые слова: cryogenic systems, helium sub-cooled, Tokamak, compression, cryogenic pumps, design, design parameters
Ключевые слова: cryogenic systems, compression, refrigerator, status, Tokamak, cooling technology, helium sub-cooled
Ключевые слова: HTS, REBCO, coated conductors, twisting, stacked blocks, cables, high field magnets, mechanical properties, transverse stress, numerical analysis, compression
Ключевые слова: LTS, Nb3Sn, wires, impregnation, cables, stacked blocks, mechanical properties, thermal properties, magnets dipole, cooling technology, compression, stress effects, strain effects
Ключевые слова: HTS, REBCO, coated conductors, stacked blocks, twisting, mechanical properties, loads, modeling, numerical analysis, compression, stress effects, critical caracteristics, current density, cores, solder
Ключевые слова: HTS, DI-Bi2223, wires, laminations, reinforcement, compression, design parameters, mechanical properties, tensile tests, stress effects, strain effects, critical caracteristics, critical current, bending radius, fatigue behavior, joints, joint resistances, current-voltage characteristics, high current processing
Puig T., Obradors X., Roa J.J., Dias F.T., Vieira V.N., Wolff-Fabris F., Kampert E., Gouvea C.P., Campos A.P., Archanjo B.S., Schaf J., SAHOO B.K.
Ключевые слова: HTS, YBCO, bulk, Meissner effect, magnetic relaxation, compression, flux density, magnetization, experimental results, microstructure, paramagnetism
Ключевые слова: Tokamak, coils poloidal field, compression, modeling, numerical analysis
Ключевые слова: ITER, cryogenic systems, cryogenic pumps, compression
Ключевые слова: presentation, cryogenic systems, accelerator magnets, compression, high field magnets
Bottura L., Sugano M., Scheuerlein C., Ballarino A., Rikel M., Bjoerstad R., Hudspeth J., Grether A.
Ключевые слова: presentation, LTS, Nb3Sn, mechanical properties, synchrotron, X-ray diffraction, texture, stress effects, strain effects, lattice parameter, compression, measurement setup, tensile tests, HTS, Bi-based systems, REBCO, Bi2212, n-value, critical caracteristics, critical current, degradation studies, MgB2, Bi2223, transverse stress, elastic behavior
Ключевые слова: power equipment, HTS, cables, cryogenic systems, refrigerator, neon, cooling technology, cryocoolers, test results, photo, compression, presentation
Ключевые слова: HTS, YBCO, thin films, irreversibility fields, upper critical fields, fabrication, stress effects, compression, pinning, PLD process, substrate SrTiO3, substrate single crystal, lattice parameter, magnetization, critical caracteristics, critical caracteristics, critical current density
Ключевые слова: power equipment, cables, power transmission lines, cryogenic systems, refrigerator, cooling technology, HTS, compression
Ключевые слова: compression, cryocoolers, cryogenic systems, numerical analysis, experimental results, design, design parameters, fabrication
Ключевые слова: MgB2, fabrication, composites, compression, pulsed operation, densification, precursors, microstructure, magnetization curves
Ключевые слова: bulk, cylinders, mechanical properties, stress distribution, compression, flux flow, modeling, numerical analysis
Ключевые слова: HTS, Bi2212/Ag, wires round, wires multifilamentary, composites, impregnation, thermal properties, compression, mechanical properties, strain effects, stress effects, wires round, wires multifilamentary, elastic behavior, Rutherford cables, measurement technique, experimental results
Ключевые слова: Tokamak, central coils, LTS, Nb3Sn, design parameters, strands, contact characteristics, modeling, numerical analysis, mechanical properties, stress effects, Cu-based conductors, compression, deformation, strain effects, angular dependence, experimental results, cables, critical caracteristics, critical current, RRR parameter
Ключевые слова: HTS, REBCO, coated conductors, critical caracteristics, mechanical properties, strain effects, experimental results, tensile tests, compression, critical current, temperature dependence, magnetic field dependence, critical temperature, YBCO, single crystals, pressure dependence, measurement technique, synchrotron, lattice parameter, anisotropy, thickness dependence, irreversible strain, solder, joints, fatigue behavior, loads, cycling, transverse stress, presentation
Ключевые слова: HTS, YBCO, bulk, fabrication, infiltration process, compression, microstructure, critical caracteristics, Jc/B curves, pinning force
Ключевые слова: cryogenic systems, cryocoolers, pulse tube cryostat, compression
Ключевые слова: LTS, Nb3Sn, cable-in-conduit conductor, modeling, displacements, loads, bending process, mechanical properties, compression, strain effects, design parameters, comparison, ITER, fusion magnets, critical caracteristics, transport currents, current-voltage characteristics, voltage, temperature dependence, n-value, critical temperature, degradation studies, critical current, twisting, high field magnets
Ключевые слова: LTS, Nb3Al, Nb3Sn, coils, stress effects, compression, strain effects, high field magnets, impregnation, cryogenic materials, thermal expansion, mechanical properties
Ключевые слова: LTS, Nb3Sn, cable-in-conduit conductor, friction, strands, contact characteristics, surface, compression, loads, measurement setup, experimental results
Osamura K., Yamada Y., Yamazaki K., Fujikami J., Hampshire D.P., Machiya S., Tsuchiya Y., Osabe G., Shobu T., Kajiwara K.
Ключевые слова: HTS, coated conductors, coils, IBAD process, MOCVD process, status, critical caracteristics, mechanical properties, irreversibility fields, temperature dependence, Jc/B curves, angular dependence, homogeneity, long conductors, stress effects, strain effects, tensile tests, stabilizing layers, thickness dependence, bending process, compression, laminations, degradation studies, displacements, joints, joint resistances, winding techniques, insulating medium, presentation
Ключевые слова: LTS, Nb3Sn, cables, mechanical properties, compression, numerical analysis, modeling, displacements, deformation, strain effects
Ключевые слова: HTS, coated conductors, REBCO, mechanical properties, stress effects, strain effects, stabilizing layers, thickness dependence, coils, compression, impregnation, critical current, current-voltage characteristics, insulating medium, loads, displacements, degradation studies, coils pancake, joints, joint resistances, review, presentation
Ключевые слова: LTS, Nb3Al, compression, high pressure processing, lattice parameter, phase composition, experimental results
Oh Y.K., Kim K.M., Yang H.L., Kim H.K., Sa J.W., Kim H.T., Park K.R., Bang E.N., Kwon M., Kim Y.O., Lee K.S.
Ключевые слова: Tokamak, central coils, mechanical properties, thermal loads, cycling, design, strain effects, compression, test results, high field magnets
Ключевые слова: HTS, YBCO, bulk, fabrication, doping effect, doping effect, crack formation, compression, trapped field distribution, mechanical properties, experimental results
Ключевые слова: cryocoolers, heat transfer, modeling, numerical analysis, compression, cryogenic systems, dynamic operation
Ключевые слова: space application, cryocoolers, compression, cooling technology, design, design parameters, modeling, experimental results
Ключевые слова: HTS, YBCO, bulk, mechanical properties, doping effect, fabrication, microstructure, trapped field distribution, compression
Ключевые слова: HTS, YBCO, films, grain boundaries, critical caracteristics, critical current density, compression, strain effects, experimental results
Thieme C.L., Ekin J.W., Xie Y., Cheggour N.(cheggour@ boulder.nist.gov)
Tachikawa K., Watanabe K., Yamada Y., Koshizuka N., Katagiri K.(katagiri@iwate-u.ac.jp), Kasaba K., Takaya R., Shimura S.
Ключевые слова: MgB2, tapes, wires, stress effects, strain effects, PIT process, tensile tests, mechanical properties, compression, bending process, experimental results, fabrication
Watanabe K., Miyoshi K., Katagiri K., Kasaba K., Nishijima G.(gen@imr.edu), Araya T.
Ключевые слова: LTS, Nb3Sn, wires, coils, compression, stress effects, reinforcement, critical current, experimental results, power equipment, critical caracteristics
Iwamoto A., Mito T., Katagiri K., Noto K., Murakami A.(amura@mech.hirosaki-u.ac.jp), Shoji Y., Kan R., Miyata H.
Ключевые слова: HTS, REBCO, bulk, mechanical properties, compression, stress effects, strain effects, nitrogen liquid , experimental results
Ключевые слова: HTS, Bi2223/Ag, tapes, compression, stress effects, degradation studies, critical current, experimental results, critical caracteristics, length
Mamalis A.G.(mamalis@central.ntua.gr), Vottea I.N., Manolakos D.E.
Ключевые слова: HTS, YBCO, bulk, plates, compression, microstructure, experimental results, numerical analysis
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.