Ключевые слова: fusion magnets, HTS, Rare Earth-BCO, coated conductors, critical characteristics, critical current, magnetic field dependence, temperature dependence, current leads, design parameters, modular system, thermal conductivity, current-voltage characteristics, thermal conductivity, cycling, resistance, contact characteristics, resistivity, cryogenic materials, stainless steel, Hastelloy, brass laminate, solder, voltage distribution, Bi2223, tapes, stacked blocks, comparison, temperature distributions, test results
Ferracin P., Willering G., Rijk G.d., Perez J.C., Manil P., Guinchard M., Rochepault E., Rondeaux F., Bourcey N., Rifflet J., Grosclaude P.
Breschi M., Koizumi N., Takahashi Y., Isono T., Hemmi T., Kawano K., Devred A., Martovetsky N., Bessette D., Suwa T., Gauthier F., Ozeki H.
Ключевые слова: ITER, coils toroidal, coils insert, loads, cycling, current sharing, temperature distributions, SULTAN, test results, strain effects
Ключевые слова: HTS, YBCO, IBAD process, MOCVD process, coated conductors, degradation studies, critical characteristics, mechanical properties, fatigue behavior, measurement setup, tensile tests, stress effects, critical current, loads, cycling, n-value, magnetic field dependence, experimental results
Ключевые слова: stellarator, mechanical properties, plans, control systems, numerical analysis, operational performance, cycling, design
Ключевые слова: ITER, coils toroidal, SULTAN, test results, strands, cables, current sharing, cycling, mechanical properties, strain effects, LTS, Nb3Sn, cable-in-conduit conductor, coatings, ac losses
Ключевые слова: magnets, coils solenoidal, current transfer, measurement technique, Rutherford cables, NbTi, LTS, cycling, stabilizing layers, resistance, accelerator magnets
Shi Y., Li J., Devred A., Nijhuis A., Wu Y., Liu H., Liu F., Qin J., Zhou C., Yagotintsev K.A., Dai C., Lubkemann R., Mao Z., Anvar V.A.
Ключевые слова: cable-in-conduit conductor, fusion magnets, design, strands, LTS, Nb3Sn, Cu-based conductors, twisting, twist-pitch, mechanical properties, stress effects, strain effects, design parameters, displacements, loads, cycling, mechanical losses, elastic behavior, ac losses, experimental results
Ключевые слова: HTS, coated conductors, stacked blocks, twisting, strands, design parameters, wires round, cables, fusion magnets, mechanical properties, stress distribution, stress effects, strain effects, experimental results, critical characteristics, critical current, loads, cycling, fabrication, prototype
Tsuchiya K., Mito T., Yoshida K., Chikaraishi H., Takahata K., Imagawa S., Kim T., Kizu K., Murakami H., Obana T., Natsume K., Hamaguchi S., Moriuchi S., Nomoto K., Noguchi H., Kobuchi T.
Ключевые слова: review, Tokamak, cable-in-conduit conductor, LTS, central coils, Nb3Sn, coils solenoidal, coils equilibrium field, NbTi, measurement setup, design parameters, current sharing, temperature dependence, stability, current waveforms, minimum quench energy, cycling, joints, joint resistances, fabrication, magnetic field dependence, quench current
Ключевые слова: HTS, GdBCO, coated conductors, cycling, loads, bending strain, transverse stress, substrate stainless steel, RCE-CDR process, measurement setup, deformation, tensile tests, stress effects, displacements, critical characteristics, critical current, strain effects, mechanical properties, laminations, microstructure
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.