Larbalestier D.C., Kvitkovic J., Parrell J.A., Hellstrom E.E., Jiang J., Trociewitz U.P., Huang Y., Kametani F., Shen T., Barua S., Hossain S.I., Oloye T.A., Bugaris D.E., Goggin C.
Awaji S., Kato T., Sugimoto M., Oguro H., Fukushima H., Sakamoto H., Hirose K., Tsubouchi H., Utoh H., Sakamoto Y., Taniguchi R.
Ключевые слова: LTS, Nb3Sn, wires, reinforcement, fabrication, strands, cables, twist-pitch, densification, critical current, magnetic field dependence, mechanical properties, bending process, strain effects, tensile tests, transverse stress, compression, ac losses, magnetization, experimental results
Ключевые слова: HTS, Bi2223, bulk, doping, irradiation effects, gamma irradiation, microstructure, densification, magnetization, hysteresis, critical caracteristics, Jc/B curves, experimental results
Badica P., Sandu V., Pasuk I., Burdusel M., Ionescu A.M., Grigoroscuta M.A., Aldica G.V., Ching Y.C.
Zhang W., Zhang Y., Li H., Liu X., Li J., Zhang P., Li C., Feng J., Liu J., Cao H., Zhang S., Shao B.
Ключевые слова: HTS, Bi2212/Ag, wires multifilamentary, wires round, quality control, fabrication, PIT process, cryogenic systems, densification, reinforcement
Ключевые слова: pnictides, wires, fabrication, sheath, economic analysis, precursors, densification, texture, composition, critical current density, hardness, review
Ключевые слова: MgB2, bulk, fabrication, densification, infiltration process, trapped field, magnetic systems, NMR magnet, MRI magnets, space application, shields, comparison, REBCO, NbTi, review
Larbalestier D.C., Parrell J.A., Hellstrom E.E., Jiang J., Trociewitz U.P., Huang Y., Kametani F., Barua S., Oz Y., Hossain S.I., Cooper J., Miller E., Oloye T.A.
Sakai N., Oka T., Ogino H., Naik S.P., Peczkowski P., Dadiel J.L., Sugiyama J., Kazuya Y., Warski T., Wojcik A., Murakami T.O.
Ключевые слова: HTS, Bi2212, wires round, overpressure processing, densification, winding process, coils, heat treatment, microstructure
Ключевые слова: MgB2, bulk, fabrication, sintering, densification, ex-situ process, new, X-ray diffraction, phase formation, lattice parameter, microstructure, heat treatment, critical caracteristics, Jc/B curves, pinning force, irreversibility fields, upper critical fields, critical temperature, resistivity, mechanical properties, experimental results, connectivity
Flukiger R., Kim J.H., Senatore C., Hossain M.S., Khan A., Gajda D., Patel D., Mustapic M., Yamauchi Y., Morawski A.J.
Ключевые слова: pnictides, tapes, densification, PIT process, fabrication, hot pressing, mechanical treatment, critical caracteristics, critical current, magnetic field dependence, current-voltage characteristics, magnetization, hysteresis, relaxation, anisotropy, pinning potential, composition, experimental results
Grasso G., Ferdeghini C., Siri A.S., Hopkins S.C., Putti M., Vignolo M., Morawski A., Bernini C., Ballarino A., Tropeano M., Gajda D., Cetner T., Bovone G., Capra M., Loria F.
Li X., Collings E.W., Sumption M.D., Shi Z.X., Tomsic M.J., Rindfleisch M.A., Wan F., Xue S.C., Zhang D.L.
Ключевые слова: pnictides, wires round, fabrication, pressure effect, densification, precursors, X-ray diffraction, magnetization, temperature dependence, microstructure, operational performance, critical caracteristics, Jc/B curves, pinning force, current-voltage characteristics, experimental results
Tomsic M., Nenkov K., Morawski A., Hassler W., Rindfleisch M.A., Gajda D., Zaleski A.J., Cetner T., Przyslupski P.
Ключевые слова: HTS, Bi2212, tapes, fabrication, densification, PIT process, microstructure, precursors, powder processing, X-ray diffraction, critical caracteristics, critical current
Ключевые слова: MgB2, wires, diffusion method, densification, fabrication
Ключевые слова: presentation, pnictides, wires, tapes, PIT process, critical caracteristics, mechanical treatment, upper critical fields, transport currents, magnetic field dependence, microstructure, Jc/B curves, magnetization, grain alignment, grain boundaries, texture, densification, porosity, doping effect, cold pressing, sintering, hot pressing, vortex phase diagram, fabrication, sheath, mechanical properties, strain effects, stress effects
Kim J.H., Rindfleisch M., Yanmaz E., Morawski A., Hossain M.S., Shahabuddin M., Gajda D., Ma Z., Patel D., Mustapic M., Cetner T., Qiu W., Jie H., Billah M.
Ключевые слова: MgB2, wires, cold pressing, densification, hot isostatic pressing, fabrication, microstructure, critical caracteristics, Jc/B curves
Ключевые слова: bus bar conductor, mechanical properties, tensile tests, laminations, test results, densification, insulating medium
Nishijima G., Tanaka H., Matsumoto A., Kishio K., Shimoyama J., Yamamoto A., Suzuki T., Okamoto K., Kodama M., Okishiro K.
Ключевые слова: MgB2, bulk, precursors, fabrication, densification, porosity, diffusion process, critical temperature, RRR parameter, critical current density, irreversibility fields, resistivity, temperature dependence, critical caracteristics, Jc/B curves, pinning force, microstructure, experimental results, phase composition, connectivity
Ключевые слова: MgB2/Cu/Nb, wires, fabrication, pressure effect, PIT process, densification, critical caracteristics, Jc/B curves, temperature dependence, n-value, porosity, microstructure
Ключевые слова: MgB2, bulk, sintering, fracture behavior, mechanical properties, density, densification, stress effects, strain effects, microstructure, experimental results
Awaji S., Kishio K., Shimoyama J., Ichikawa N., Motoki T., Setoyama Y., Kon K., Inamori S., Naito K.
Ключевые слова: HTS, bulk, texture, densification, precursors, microstructure, critical caracteristics, porosity, peak effect, Jc/B curves, relaxation, experimental results
Hahn S., Kim Y., Larbalestier D., Chen P., Jiang J., Hellstrom E., Kametani F., Trociewitz U., Lu J., Griffin V., Hilton D., Starch W., Davis D., Matras M., Francis A., Boebinger M., Bosque E., Constantinescu A., English L., Oz Y.
Ключевые слова: MgB2/Cu, wires, in-situ process, doping effect, densification, heat treatment, annealing process, critical caracteristics, Jc/B curves, fabrication
Bottura L., Sugano M., Scheuerlein C., Rikel M.O., Jiang J., Michiel M.D., Ballarino A., Matras M., Bjoerstad R., Hudspeth J.
Ключевые слова: HTS, Bi2212, wires round, densification, mechanical properties, strain effects, degradation studies, critical caracteristics, critical current, overpressure processing, strain effects, X-ray diffraction, measurement setup, n-value, lattice parameter, temperature dependence, thermal expansion
Tanaka H., Shimoyama J.-I., Kishio K., Yamamoto A., Ikeda K., Hata S., Shimada Y., Nakashima H., Matsumura S.
Ключевые слова: MgB2, bulk, milling process, fabrication, ex-situ process, microstructure, sintering, critical caracteristics, critical current density, densification
Ключевые слова: MgB2, fabrication, composites, compression, pulsed operation, densification, precursors, microstructure, magnetization curves
Ключевые слова: pnictides, tables, wires, fabrication, ex-situ process, PIT process, review, texture, density, critical caracteristics, Jc/B curves, experimental results, mechanical treatment, thickness dependence, microstructure, transport currents, RRR parameter, strain effects, mechanical properties, densification
Ключевые слова: MgB2, bulk, doping effect, densification, trapped field, temperature dependence, composition, magnetization, critical caracteristics, Jc/B curves, pinning force
Ключевые слова: MgB2, composites, fabrication, alloying effects, doping effect, microstructure, phase formation, densification, lattice parameter
Ключевые слова: HTS, coated conductors, doping effect, irreversibility fields, high field magnets, review, prototype, NMR magnet, Bi2212, fabrication, densification, central coils, correction coils, critical current, critical current, uniformity, long conductors, Jc/B curves, pinning force, Jc/B curves, economic analysis, LTS, Nb3Sn, NbTi, presentation
Ключевые слова: presentation, MgB2, doping effect, critical temperature, upper critical fields, irradiation effects, bulk, films amorphous, anisotropy, wires multifilamentary, porosity, fabrication, ex-situ process, PIT process, sheath, bending process, precursors, powder processing, in-situ process, densification, cold isostatic pressing, critical caracteristics, Jc/B curves, diffusion method, infiltration process, economic analysis, pinning centers artificial, MRI magnets, cables, power equipment, current leads, level sensor, rotating machines, hydrogen pump, wind farms application, renewable energy systems, Maglev system, trapped field, space application, shields, review
Ключевые слова: HTS, Bi2212/Ag, PIT process, fabrication, densification, melting, porosity, critical caracteristics, critical current density, bubbles
Dhalle M., Tomsic M., Krooshoop H.J., Sumption M.D., Rindfleisch M., Senatore C., Nijhuis A., Kulich M., Zhou C., Gao P.
Ключевые слова: HTS, Bi2212, wires round, fabrication, overpressure processing, densification, porosity, high field magnets
Kovac P., Melisek T., Goldacker W., Tomsic M., Kim J.H., Dou S.X., Rindfleisch M., Kopera L., Maeda M., Ringsdorf B., Hossain M.S., Jung A., Patel D., Kario A., Runtsch B., Mustapic M., Cicek O., Motaman A., Barua S.
Ключевые слова: MgB2, bulk, fabrication, sintering, porosity, densification, milling process, ex-situ process, grain size, resistivity, critical temperature, microstructure, temperature dependence, connectivity
Ключевые слова: MgB2, bulk, fabrication, sintering, densification, microstructure, trapped field, temperature dependence, critical caracteristics, Jc/B curves
Ключевые слова: MgB2/Cu, fabrication, densification, joints, pulsed operation, magnetic field dependence, microstructure, MRI magnets
Larbalestier D.C., Scheuerlein C., Hong S., Miao H., Parrell J.A., Hellstrom E.E., Jiang J., Trociewitz U.P., Huang Y., Ghosh A.K., Di Michiel M.
Ключевые слова: MgB2, bulk, fabrication, precursors, densification, microstructure, heat treatment, critical current, Jc/B curves, density
Ключевые слова: MgB2/Fe, diffusion process, high pressure processing, densification, fabrication, critical caracteristics, Jc/B curves, microstructure
Ключевые слова: HTS, REBCO, bulk, mechanical properties, single-domain, fabrication, densification, experimental results
Ключевые слова: HTS, Bi2212/Ag, wires, densification, critical caracteristics, critical current, critical current density, n-value, experimental results, bubbles
Ключевые слова: MgB2, bulk, doping effect, densification, microstructure, fabrication
Ключевые слова: MgB2, bulk, fabrication, ex-situ process, sintering, densification, resistivity, temperature dependence, microstructure, critical caracteristics, Jc/B curves, pinning force
Majoros M., Sun Y., Collings E.W., Yang Y., Sumption M.D., Shi Z.X., Susner M.A., Ding Y., Li G.Z., Kovacs C.J., Zhuang J.C.
Ключевые слова: review, HTS, critical temperature, pressure dependence, LTS, Nb3Al, Nb3Ga, Nb3Sn, stability, phase composition, MgB2, upper critical fields, anisotropy, irreversibility fields, composition, lattice parameter, wires, critical caracteristics, Jc/B curves, grain boundaries, pinning, densification, history, presentation
Ключевые слова: HTS, YBCO, REBCO, coated conductors, architecture, MgB2, wires, review, critical caracteristics, critical current, thickness dependence, magnetic field dependence, critical current density, angular dependence, fabrication, doping effect, homogeneity, mechanical properties, Bi2223, economic analysis, Bi2212, n-value, densification, architecture, presentation
Eisterer M., Weber H.W., Gawalek W., Sokolovsky V., Goldacker W., Meerovich V., Habisreuther T., Litzkendorf D., Noudem J., Schmidt C., Rindfleisch M., Wendt M., Dellith J., Prikhna T., Savchuk Y., Sergienko N., Moshchil V., Dub S., Sverdun V., Tkach V., Danilenko N., Kozyrev A., Soldatov A., Serga M., Turkevich V., Tompsic M., Karau F.*10, Fesenko I., You S., Nagorny P*1.
Malagoli A., Larbalestier D.C., Scheuerlein C., Miao H., Parrell J.A., Hellstrom E.E., Jiang J., Huang Y., Kametani F., Michiel M.D., Shen T.
Ключевые слова: HTS, REBCO, melting, bulk, fabrication, densification, mechanical properties, microstructure, elastic behavior, quality control
Prikhna T.A., Gawalek W., Goldacker W., Savchuk Y.M., Noudem J., Soldatov A., Eisterer M., Weber H.W., Sokolovsky V., Serga M., Dub S.N., Wendt M., You S., Sergienko N.V., Moshchil V.E., Tkach V.N., Dellith J., Karau F., Tomsic M., Shmidt C., Fesenko I.P., Habisreuther T., Litzkendorf D., Meerovich V., Sverdun V.B.
Ключевые слова: REBCO, bulk, densification, porosity, mechanical properties, fracture behavior, bending process, microstructure
Tachikawa K., Yamada Y., Tomsic M., Kumakura H., Matsumoto A., Kim J.H., Rindfleisch M., Maeda M., Wada K.
Ключевые слова: MgB2/Nb/Monel, wires, hot pressing, fabrication, densification, grain alignment, microstructure, critical caracteristics, Jc/B curves, anisotropy
Ключевые слова: MgB2, bulk, fabrication, porosity, densification, Jc/B curves, critical caracteristics, microstructure, resistivity, temperature dependence, pinning force
Ключевые слова: MgB2, alloying effects, in-situ process, fabrication, wires, tapes, densification, critical caracteristics, magnetic properties, pressure effect, Jc/B curves, resistive transition, resistivity, temperature dependence, pinning force, irreversibility fields, experimental results, cold pressing
Ключевые слова: MgB2, bulk, densification, heat treatment, Jc/B curves, fabrication, critical caracteristics
Ключевые слова: MgB2, bulk, fabrication, sintering, pressure effect, densification
Ключевые слова: MgB2/Fe, PIT process, in-situ process, fabrication, tapes, mechanical treatment, densification, Jc/B curves, microstructure, critical caracteristics
Galvan D.H., Duran A., Adem E., Escudero R., Verdin E., Romero-Salazar C., Morales F., Rickards J., Maple M.
Ключевые слова: patents, fabrication, wires, PIT process, densification, defects, critical current density, critical caracteristics
Abell J.S., Mikheenko P.(p.mikheenko@bham.ac.uk), Bevan A.I.
Ключевые слова: MgB2, bulk, nucleation, densification, critical current density, fabrication, critical caracteristics
Benavidez E.R.(ebenavidez@frsn.utn.edu.ar), GonzalezOliver C.J.R.(gon@cab.cnea.gov.ar)
Ключевые слова: HTS, YBCO, fabrication, sintering, densification
Ayai N., Hayashi K., Kato T., Fujino K., Yamazaki K., Ohkura K., Fujikami J., Ueno E., Kikuchi M., Kobayashi S.(kobayashi-shinichi@sei.co.jp)
Ayai N., Hayashi K., Kato T., Sato K., Fujino K., Kobayashi S., Yamazaki K., Fujikami J., Ueno E., Kikuchi M., Ohkura K.(kobayashi-shinichi@sei.co.jp), Hata R.
Katsura Y., Horii S., Kishio K., Shimoyama J., Iwayama I., Yamamoto A., Ueda S.(tt27183@mail.ecc.u-tokyo.ac.jp)
Ключевые слова: MgB2, MgB2, diffusion method, fabrication, densification, pinning, Jc/B curves, experimental results, critical caracteristics
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.