Ключевые слова: HTS, Bi2212, wires multifilamentary, joints superconducting , solder, microstructure, current-voltage characteristics, experimental results
Li X., Zhao Y., Pan Y., Li Z., Hong Z., Wang M., Wu W., Zhang Z., Sheng J., Jin Z., Huang Z., Dong F.
Ключевые слова: joints, YBCO, coated conductors, solder, modeling, joint resistances, geometry effects, field decay, numerical analysis
Ключевые слова: HTS, REBCO, comparison, coated conductors, joints, joint resistances, solder, fabrication, interfaces, resistance, current transfer, ex-situ process
Gomory F., Frolek L., Misik J., Michalcova E., Drienovsky M., Palcut M., Gogola P., Jancuska I., Pekarcнkova M.
Ключевые слова: soldered-stacked-square wire, HTS, GdBCO, coated conductors, width, twisting, solder, stacked blocks, fabrication, critical caracteristics, twist-pitch, ac losses, frequency dependence, critical current distribution, uniformity, current-voltage characteristics, self-field effect, transport currents, experimental results
Sytnikov V.E., Samoilenkov S.V., Degtyarenko P.N., Kopylov S.I., Balashov N.N., Ivanov S.S., Zheltov V.V., Molodyk A.A., Gorbunova D.A.
Ключевые слова: magnets, joints, solder, bus bar conductor, LHC, measurement technique, acoustic emission, test results, pulsed current, eddy currents, ultrasonic methods
Noe M., Schreiner F., Schreiner F., Gutheil B., Reiser W., Huwer S., Hanebeck C., Rach C., Rohrenbeck M.
Ключевые слова: HTS, bus bar conductor, dc performance, current leads, cooling technology, design, fabrication, YBCO, coated conductors, Cu-based conductors, solder, joints, heat losses, heat leakage
Mikhailova G.N., Troitskii A.V., Markelov A.V., Demikhov T.E., Antonova L.K., Molodyk A.A., Mikhailov A.A., Prosvirnin D.V.
Ключевые слова: HTS, coated conductors, joints, joints, solder, GdBCO, magnetic field dependence, experimental results
Ключевые слова: HTS, REBCO, coated conductors, joints, joint resistances, solder, magnetic field dependence, stabilizing layers, RRR parameter, comparison, commercialization, helium liquid
Keilin V.E., Kovalev I.A., Novikov S.I., Novikov M.S., Shcherbakov V.I., Naumov A.V., Polyakov A.V., Surin M.I., Ilyin A.A., Makarenko M.N.
Ключевые слова: HTS, REBCO, substrate Hastelloy, coated conductors, current leads, solder, high current processing, design, stacked blocks, solder, fabrication, test results
Ключевые слова: HTS, REBCO, coated conductors, stacked blocks, twisting, mechanical properties, loads, modeling, numerical analysis, compression, stress effects, critical caracteristics, current density, cores, solder
Lee S., MOLODYK A., Samoilenkov S., Blednov A., Markelov A., Petrykin V., Martynova I., Kalitka V., Makarevich A., Moyzykh M.
Ключевые слова: HTS, coated conductors, stacked blocks, cables, high current processing, long conductors, high field magnets, REBCO, twist-pitch, critical caracteristics, current-voltage characteristics, critical current, magnetic field dependence, mechanical properties, strain effects, jacketing, termination, solder, test results, length, CroCo conductor
Ключевые слова: HTS, REBCO, coated conductors multifilamentary, solder, ac losses, modeling computational, experimental results, current density, distribution, striations
Scheuerlein C., Ostojic R., Bordry F., Pojer M., Savary F., Perin A., Charifoulline Z., Garion C., Prin H., Atieh S., Tock J.P., Dahlerup-Petersen K., Bourcey N., Bodart D., Cruikshank P., Dalin J.M., Musso A.
Ключевые слова: LHC, joints, magnets, solder, joint resistances, magnets dipole
Ключевые слова: fusion magnets, coils toroidal, HTS, coated conductors, joints superconducting , fabrication, solder, interfaces, resistance, upper critical fields, electrical conductivity, thermal conductivity, joint resistances, temperature dependence, critical caracteristics, current-voltage characteristics
Ключевые слова: power equipment, FCL inductive, HTS, YBCO, coated conductors, coils, design parameters, design, fabrication, winding techniques, solder, termination, numerical analysis, test results
Ключевые слова: HTS, GdBCO, coated conductors, Al, alloys, laminations, solder, reinforcement, RCE-LATS process, critical caracteristics, current-voltage characteristics, fabrication
Ключевые слова: HTS, YBCO, coated conductors, joints, solder, fabrication, comparison, joint resistances, measurement technique
Ключевые слова: LHC, control systems, joints, solder, bus bar conductor, quality control
Ключевые слова: HTS, GdBCO, coated conductors, joints, solder, welding, fabrication, current-voltage characteristics, joint resistances, experimental results, ultrasonic methods
Ключевые слова: LTS, NbTi, tapes, HTS, YBCO, coated conductors, solder, multilayered structures, hybrid systems, current distribution, modeling, numerical analysis, experimental results, measurement setup
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Liu C., Ding K., Lu K., Niu E., Ran Q.
Ключевые слова: HTS, Bi2223, tapes, current leads, ITER, fabrication, test results, prototype, LTS, NbTi, cable-in-conduit conductor, joints, solder, heat exchanger
Ключевые слова: HTS, Bi2223/Ag, tapes, joints, experimental results, solder, critical caracteristics, current-voltage characteristics
Bottura L., Scheuerlein C., Bertinelli F., Fessia P., Ballarino A., Tock J.-P., Heck S., Thonet P., Solfaroli M., Andreassen O.
Ключевые слова: LHC, joints, bus bar conductor, test results, Rutherford cables, resistance, control systems, series connection, solder, quality control
Ключевые слова: HTS, coils, joints, solder, discharge characteristics, GdBCO, coated conductors, design parameters, overcurrent, model small-scale, test results
Ключевые слова: HTS, coated conductors, joints, joint resistances, critical caracteristics, current-voltage characteristics, solder, REBCO
Ключевые слова: HTS, coated conductors, coils pancake, REBCO, joint resistances, solder, fabrication
Scheuerlein C., Verweij A., Savary F., Prin H., Principe R., Lackner F., Grand-Clement L., Duret M., Tock J.-Ph., Triquet S.
Ключевые слова: LHC, joints, Rutherford cables, solder, test results
Ключевые слова: HTS, coated conductors multifilamentary, solder, ac losses, experimental results, numerical analysis, modeling, comparison, striations
Ключевые слова: ITER, current leads, prototype, fabrication, design, design parameters, pressure drop, HTS, Bi2223, stacked blocks, LTS, NbTi, cable-in-conduit conductor, joint resistances, insulation, solder, heat exchanger
Ключевые слова: power equipment, FCL resistive, modeling, power losses, economic analysis, HTS, YBCO, coated conductors, design parameters, numerical analysis, electromagnetic forces, thermal performance, power transmission lines, thermal conductivity, specific heat, resistivity, alloys, solder, heat transfer, fault currents, current limiting characteristics, presentation
Ключевые слова: HTS, REBCO, coated conductors, critical caracteristics, mechanical properties, strain effects, experimental results, tensile tests, compression, critical current, temperature dependence, magnetic field dependence, critical temperature, YBCO, single crystals, pressure dependence, measurement technique, synchrotron, lattice parameter, anisotropy, thickness dependence, irreversible strain, solder, joints, fatigue behavior, loads, cycling, transverse stress, presentation
Ключевые слова: HTS, coated conductors, architecture, REBCO, status, uniformity, critical caracteristics, critical current, angular dependence, magnetic field dependence, mechanical properties, tensile tests, pressure dependence, installation, solder, current-voltage characteristics, ac losses, cables, Roebel conductors, presentation
Ключевые слова: solder, thermal properties, mechanical properties, resistivity, thermal expansion, composites, experimental results
Ключевые слова: LHC, series connection, joint resistances, accelerator magnets, cables, LTS, bus bar conductor, NbTi, joints, solder, high field magnets
Ключевые слова: LTS, Nb3Sn, strands, joints, fabrication, joint resistances, temperature dependence, hardness, experimental results, solder
Wang L., Dietderich D., Green M.A., Trillaud F., Wu H., Xu F.Y., Liu X.K., Zheng S.X., Pan H., Gartner T.E., Higley H.C., Mentink M., Tam D.G.
Ключевые слова: experimental devices, coils, joint resistances, joints, numerical analysis, experimental results, mechanical properties, stress effects, solder
Ключевые слова: HTS, Bi2212, electroplating process, contact characteristics, interfaces, coatings, fabrication, solder
Mathieu J.-P., Fagnard J.-F., Laurent P., Mattivi B., Henrist C., Vanderbemden P., Ausloos M., Cloots R.
Murakami M., Sakai N., Koshizuka N., Katagiri K., Kono T., Iida K., Murakami A., Kaneko T.(kaneko@istec.or.jp)
Ключевые слова: HTS, YBCO, bulk, grain boundaries, mechanical properties, microstructure, fracture behavior, tensile tests, crack formation, fabrication, experimental results, solder
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.