Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: current
Показаны 6281−6300 из 8890	< предыдущая 1 ... 313 314 315 316 317 ... 445 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Lee S.H.

Electrical and superconducting properties of BiSrCaCuO ceramics superconductors

Ключевые слова: HTS, Bi-based systems, bulk, fabrication, critical caracteristics, current-voltage characteristics, susceptibility, ceramics

Physica C, 2011, v.471, N 21-22, p.774-776

Полный текст на Sci-Hub

Дополнительная информация

Murakami M., Izumi M., Zhang Y.F., Li P.L., Gao T., Li Y.J., Liu Y.S.

Enhanced JC in air-processed GdBa2Cu3O7-d superconductor bulk grown by the additions of nano-particles

Ключевые слова: HTS, REBCO, bulk, doping effect, nanodoping, single-domain, fabrication, critical caracteristics, Jc/B curves, trapped field distribution, critical current density, composition, pinning force

Physica C, 2011, v.471, N 21-22, p.840-842

Полный текст на Sci-Hub

Дополнительная информация

Fujishiro H., Naito T., Handa T., Kikuchi Y.

Jc distribution measurement and analysis on superconducting bulk using “Magnetoscan” method

Ключевые слова: bulk, HTS, REBCO, Hall sensor, trapped field distribution, defects, critical current density, homogeneity, critical current distribution, experimental results

Physica C, 2011, v.471, N 21-22, p.893-896

Полный текст на Sci-Hub

Дополнительная информация

Rupich M.W., Thieme C., Li X., Fleshler S., Sathyamurthy S.

Advanced development of TFA-MOD coated conductors

Ключевые слова: HTS, coated conductors, TFA-MOD process, RABITS process, YBCO, critical caracteristics, critical current, long conductors, homogeneity, transport currents, thickness dependence, microstructure, angular dependence, fabrication

Physica C, 2011, v.471, N 21-22, p.919-923

Полный текст на Sci-Hub

Дополнительная информация

Ohmatsu K., Konishi M., Shingai Y., Abiru K.

30 mm wide process of GdBCO PLD/clad-type textured metal substrates

Ключевые слова: HTS, coated conductors, REBCO, PLD process, critical caracteristics, critical current, angular dependence, critical current distribution, microstructure, geometry effects, fabrication, substrate metallic, texture

Physica C, 2011, v.471, N 21-22, p.924-928

Полный текст на Sci-Hub

Дополнительная информация

Iijima Y., Saitoh T., Kakimoto K., Sutoh Y., Igarashi M., Hanyu S., Hanada Y., Kutami H., Hayashida T., Nakamura N., Takemoto T., Kikutake R.

Long RE123 coated conductors with high critical current over 500 A/cm by IBAD/PLD technique

Ключевые слова: HTS, coated conductors, IBAD process, PLD process, REBCO, critical caracteristics, current-voltage characteristics, n-value, critical current distribution, long conductors, angular dependence, fabrication

Physica C, 2011, v.471, N 21-22, p.929-931

Полный текст на Sci-Hub

Дополнительная информация

Yoshida Y., Izumi T., Shiohara Y., Takahashi Y., Takahashi Y., Kato T., Ichino Y., Takai Y., Yoshizumi M.

Thickness dependence of Ic and Jc of LTG-SmBCO coated-conductor on IBAD-MgO tapes

Ключевые слова: HTS, REBCO, coated conductors, IBAD process, comparison, LTG process, substrate single crystal, films thick, thickness dependence, critical caracteristics, critical current, magnetic field dependence, experimental results

Physica C, 2011, v.471, N 21-22, p.937-939

Полный текст на Sci-Hub

Дополнительная информация

Kajikawa K., Funaki K.

A simple method to eliminate shielding currents for magnetization perpendicular to superconducting tapes wound into coils

Ключевые слова: HTS, REBCO, coated conductors, coils, experimental results, numerical analysis, shielding current density, magnetization

Superconductor Science Technology, 2011, v.24, N 12, p.125005

Полный текст на Sci-Hub

Дополнительная информация

Maeda T., Matsumoto K., Horii S., Mukaida M., Fujiyoshi T., Sueyoshi T., Kai H., Mele P., Haruta M.

Growth temperature dependence of flux pinning properties in ErBa2Cu3Oy thin films with nano-rods

Ключевые слова: HTS, REBCO, films, nanorods, nanoscaled effects, fabrication, PLD process, substrate SrTiO3, critical caracteristics, current-voltage characteristics, magnetic properties, irreversibility fields, pinning, critical current density, local distribution, experimental results

Physica C, 2011, v.471, N 21-22, p.944-946

Полный текст на Sci-Hub

Дополнительная информация

Yoshida Y., Takeuchi T., Ichino Y., Takai Y., Kita R., Suzuki K., Yoshimura T.

Quick screening for new flux pinning materials in YBCO films with the combinatorial-PLD method

Ключевые слова: HTS, YBCO, films, pinning centers artificial, substrate SrTiO3, PLD process, composition, critical temperature, critical caracteristics, Jc/B curves, angular dependence, critical current density, experimental results, new, screen

Physica C, 2011, v.471, N 21-22, p.947-950

Полный текст на Sci-Hub

Дополнительная информация

Sohma M., Yamaguchi I., Tsukada K., Kumagai T., Matsui M., Manabe T., Tanabe D.

Homoepitaxial growth of MOD-YBCO thick films on evaporated and MOD templates

Ключевые слова: HTS, YBCO, films thick, MOD process, films epitaxial, substrate sapphire, buffer layers, fabrication, co-evaporation process, comparison, critical caracteristics, critical current, thickness dependence, microstructure

Physica C, 2011, v.471, N 21-22, p.956-959

Полный текст на Sci-Hub

Дополнительная информация

Izumi T., Ito T., Takahashi Y., Kuriki R., Yoshizumi M., Matsuse K., Tokumaru M.

Improvement of IBAD-MgO texturing for high throughput of buffered substrate

Ключевые слова: HTS, coated conductors, MOD process, texture, buffer layers, IBAD process, PLD process, fabrication, REBCO, critical current, critical current distribution, long conductors

Physica C, 2011, v.471, N 21-22, p.963-965

Полный текст на Sci-Hub

Дополнительная информация

Amemiya N., Nakamura T., Izumi T., Li Q., Ohmatsu K., Ohya M., Maruyama O., Takeuchi K., Okuma T., Nishino R.

Lateral critical current density distributions degraded near edges of coated conductors through cutting processes and their influence on ac loss characteristics of power transmission cables

Ключевые слова: HTS, YBCO, coated conductors, critical caracteristics, critical current distribution, cables, ac losses, degradation studies, experimental results, homogeneity, power equipment, lateral effects

Physica C, 2011, v.471, N 21-22, p.990-994

Полный текст на Sci-Hub

Дополнительная информация

Ko T.K., Lee J., Chang K.S., Jang J.Y.

An experimental analysis on the design of HTS current lead with respect to the arrangement of coated conductor and the shape of a current terminal

Ключевые слова: HTS, coated conductors, current leads, design, geometry effects, sample shapes, critical caracteristics, termination, YBCO, current-voltage characteristics

Physica C, 2011, v.471, N 21-22, p.1007-1011

Полный текст на Sci-Hub

Дополнительная информация

Nagaya S., Kashima N., Watanabe T., Matsushita T., Otabe E.S., Kiuchi M., Takahashi Y., Shikimachi K.

Superconducting layer thickness dependence of magnetic relaxation property in CVD processed YGdBCO coated conductors

Ключевые слова: HTS, YBCO, REBCO, coated conductors, CVD process, thickness dependence, relaxation, magnetic properties, IBAD process, flux creep, modeling, critical caracteristics, Jc/B curves, current-voltage characteristics, experimental results

Physica C, 2011, v.471, N 21-22, p.1025-1028

Полный текст на Sci-Hub

Дополнительная информация

Awaji S., Watanabe K., Fujiyoshi T., Ikegami T., Ishikawa N., Sueyoshi T., Yonekura K., Sogo T., Mitsugi F.

Influence of crossing angles of columnar defects on vortex glass transition in YBCO thin films

Ключевые слова: HTS, YBCO, films, defects columnar, vortex phase diagram, substrate SrTiO3, PLD process, ion irradiation, critical caracteristics, Jc/B curves, current-voltage characteristics, temperature dependence, experimental results

Physica C, 2011, v.471, N 21-22, p.1029-1032

Полный текст на Sci-Hub

Дополнительная информация

Yamada H., Kamitani A., Takano Y., Saito A., Ohshima S., Suzuki T., Takayama T., Hattori K.

Detection of smaller Jc region and damage in YBCO coated conductors by using permanent magnet method

Ключевые слова: HTS, YBCO, coated conductors, measurement technique, critical current density, damage mechanisms

Physica C, 2011, v.471, N 21-22, p.1033-1035

Полный текст на Sci-Hub

Дополнительная информация

Iijima Y., Higashikawa K., Kiss T., Saitoh T., Izumi T., Inoue M., Imamura K., Kakimoto K., Shiohara K., Kawaguchi T.

Scanning Hall-probe microscopy system for two-dimensional imaging of critical current density in RE-123 coated conductors

Ключевые слова: HTS, REBCO, YBCO, measurement technique, critical current density, Hall sensor, critical current distribution, measurement setup, magnetic flux distribution

Physica C, 2011, v.471, N 21-22, p.1036-1040

Полный текст на Sci-Hub

Дополнительная информация

Higashikawa K., Kiss T., Izumi T., Inoue M., Yoshizumi M., Shiohara K., Kawaguchi T.

Measurement of local critical currents in TFA-MOD processed coated conductors by use of scanning Hall-probe microscopy

Ключевые слова: HTS, coated conductors, TFA-MOD process, measurement technique, local distribution, critical current, critical caracteristics, Hall sensor

Physica C, 2011, v.471, N 21-22, p.1041-1044

Полный текст на Sci-Hub

Дополнительная информация

Osamura K., Sugano M., Prusseit W., Ochiai S., Okuda H., Arai T., Toda A., Nagano S., Shimokawa Y.

Change in local and overall V–I curves with applied tensile strain in DyBCO-coated conductor

Ключевые слова: HTS, REBCO, coated conductors, critical caracteristics, current-voltage characteristics, local distribution, mechanical strain, mechanical properties, tensile tests, experimental results, crack formation

Physica C, 2011, v.471, N 21-22, p.1050-1053

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: current

Electrical and superconducting properties of BiSrCaCuO ceramics superconductors

Enhanced JC in air-processed GdBa2Cu3O7-d superconductor bulk grown by the additions of nano-particles

Jc distribution measurement and analysis on superconducting bulk using “Magnetoscan” method

Advanced development of TFA-MOD coated conductors

30 mm wide process of GdBCO PLD/clad-type textured metal substrates

Long RE123 coated conductors with high critical current over 500 A/cm by IBAD/PLD technique

Thickness dependence of Ic and Jc of LTG-SmBCO coated-conductor on IBAD-MgO tapes

A simple method to eliminate shielding currents for magnetization perpendicular to superconducting tapes wound into coils

Growth temperature dependence of flux pinning properties in ErBa2Cu3Oy thin films with nano-rods

Quick screening for new flux pinning materials in YBCO films with the combinatorial-PLD method

Homoepitaxial growth of MOD-YBCO thick films on evaporated and MOD templates

Improvement of IBAD-MgO texturing for high throughput of buffered substrate

Lateral critical current density distributions degraded near edges of coated conductors through cutting processes and their influence on ac loss characteristics of power transmission cables

An experimental analysis on the design of HTS current lead with respect to the arrangement of coated conductor and the shape of a current terminal

Superconducting layer thickness dependence of magnetic relaxation property in CVD processed YGdBCO coated conductors

Influence of crossing angles of columnar defects on vortex glass transition in YBCO thin films

Detection of smaller Jc region and damage in YBCO coated conductors by using permanent magnet method

Scanning Hall-probe microscopy system for two-dimensional imaging of critical current density in RE-123 coated conductors

Measurement of local critical currents in TFA-MOD processed coated conductors by use of scanning Hall-probe microscopy

Change in local and overall V–I curves with applied tensile strain in DyBCO-coated conductor