Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: current
Показаны 6301−6320 из 8873	< предыдущая 1 ... 314 315 316 317 318 ... 444 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Kumakura H., Matsumoto A., Cheng C.H., Zhao Y., Pan X.F.

Cooperative doping effects of Ti and nano-SiC on transport critical current density and grain connectivity of in situ MgB2 tapes

Ключевые слова: MgB2/Fe, PIT process, in-situ process, doping effect, nanodoping, nanoscaled effects, density, critical caracteristics, transport currents, critical current, magnetic field dependence, resistive transition, temperature dependence, resistivity, microstructure, grain structure, experimental results, connectivity

Physica C, 2011, v.471, N 21-22, p.1128-1132

Полный текст на Sci-Hub

Дополнительная информация

Doi T., Nishikawa T., Fujiyoshi T., Sueyoshi T., Yonekura K.

Flux pinning properties of MgB2 thin films on Al tape substrates deposited by electron beam evaporation

Ключевые слова: MgB2, films, substrate metallic, substrate Al, electron beam evaporation, pinning, grain boundaries, critical caracteristics, critical current density, angular dependence, Jc/B curves, pinning force

Physica C, 2011, v.471, N 21-22, p.1142-1144

Полный текст на Sci-Hub

Дополнительная информация

Kumakura H., Takano Y., Ozaki T., Mizuguchi Y., Deguchi K.

Microstructure and transport properties of FeTe0.5Se0.5 superconducting wires fabricated by ex-situ Powder-in-tube process

Ключевые слова: oxypnictides, wires, PIT process, fabrication, ex-situ process, microstructure, heat treatment, resistive transition, critical current, critical current density, Jc/B curves

Physica C, 2011, v.471, N 21-22, p.1150-1153

Полный текст на Sci-Hub

Дополнительная информация

Kamitani A., Ikuno S., Takayama T., Itoh T.

Numerical investigations on contactless methods for measuring critical current density in HTS: application of modified constitutive-relation method

Ключевые слова: measurement technique, numerical analysis, contactless, critical caracteristics, critical current density, HTS, films

Physica C, 2011, v.471, N 21-22, p.1163-1166

Полный текст на Sci-Hub

Дополнительная информация

Amemiya N., Aoki Y., Saito T., Mukoyama S., Yagi M., Ishiyama A., Wang X., Ohkuma T., Maruyama O.

Progress of 275 kV–3 kA YBCO HTS cable

Ключевые слова: HTS, YBCO, coated conductors, cables in separated cryostat, power transmission lines, ac losses, overcurrent, insulating medium, disks, design parameters, review, power equipment

Physica C, 2011, v.471, N 21-22, p.1274-1278

Полный текст на Sci-Hub

Дополнительная информация

Amemiya N., Masuda T., Ishiyama A., Ohkuma T., Yumura H., Ohya M.

Design and evaluation of 66 kV-class HTS power cable using REBCO wires

Ключевые слова: HTS, REBCO, coated conductors, cables three-in-one, design parameters, ac losses, critical caracteristics, critical current, temperature dependence, current-voltage characteristics, termination, current leads, loads, fault currents, cables current limiting, power equipment

Physica C, 2011, v.471, N 21-22, p.1279-1282

Полный текст на Sci-Hub

Дополнительная информация

Lee S., Lee B., Yoon J., Yang B.

Modeling of a 22.9 kV 50 MVA superconducting power cable based on PSCAD/EMTDC for application to the Icheon substation in Korea

Ключевые слова: HTS, coated conductors, cables three-in-one, YBCO, design parameters, modeling, current distribution, power equipment

Physica C, 2011, v.471, N 21-22, p.1283-1289

Полный текст на Sci-Hub

Дополнительная информация

Watanabe T., Tsuda M., Hamajima T., Hu N., Toda M.

Recovery time analysis in a tri-axial HTS cable after an over-current fault

Ключевые слова: HTS, cables triaxial, power equipment, overcurrent, recovery characteristics, heat transfer, modeling computational, numerical analysis, temperature distribution

Physica C, 2011, v.471, N 21-22, p.1295-1299

Полный текст на Sci-Hub

Дополнительная информация

Sun J., Yamaguchi S., Hamabe M., Watanabe H., Sugino M., Kawahara T., Yamauchi S.

Critical current measurements for design of superconducting DC transmission power cable

Ключевые слова: cables, dc performance, critical caracteristics, DI-Bi2223/Ag, tapes, current-voltage characteristics, magnetic flux distribution, experimental results, power equipment

Physica C, 2011, v.471, N 21-22, p.1313-1316

Полный текст на Sci-Hub

Дополнительная информация

Han S.-C., Han B.-S., Han T.-H., Du H.-I., Kim Y.-J., Song S.-S., Lee D.-H.

Evaluation on current-limiting performance of the YBCO thin-film wire considering electric coupling condition

Ключевые слова: HTS, YBCO, coated conductors, current limiting characteristics, resistance, temperature dependence, FCL inductive, model small-scale, stabilizing layers, cycling, quench time, experimental results

Physica C, 2011, v.471, N 21-22, p.1317-1321

Полный текст на Sci-Hub

Дополнительная информация

Choi H.S., Sung T.H., Cho Y.S., Jung B.I., Chul D.C., Ha K.H., Choi S.G.

Reclosing operation characteristics of the flux-coupling type SFCL in a single-line-to ground fault

Ключевые слова: power equipment, FCL inductive, FCL three-phase, quench properties, recovery characteristics, fault currents, current limiting characteristics, experimental results, FCL flux-coupling

Physica C, 2011, v.471, N 21-22, p.1327-1331

Полный текст на Sci-Hub

Дополнительная информация

Choi H.S., Cho Y.S., Jung B.I., Ha K.H., Choi S.G., Park H.M.

Characteristics of transformer-type superconducting fault current limiter depending on reclosing in changing the number of turns of secondary winding

Ключевые слова: power equipment, FCL inductive, HTS, YBCO, meander, films, substrate sapphire, core iron, fabrication, current limiting characteristics, recovery characteristics, experimental results

Physica C, 2011, v.471, N 21-22, p.1332-1336

Полный текст на Sci-Hub

Дополнительная информация

Choi H.S., Chung D.C., Cho Y.S., Jung B.I., Cheong D.U., Pak B.H.

Characterization of reactors for integrated matrix-type SFCL

Ключевые слова: HTS, YBCO, films, substrate sapphire, matrix, trigger, fabrication, fault currents, critical caracteristics, current-voltage characteristics, experimental results, FCL rectifier type, power equipment

Physica C, 2011, v.471, N 21-22, p.1348-1353

Полный текст на Sci-Hub

Дополнительная информация

Choi H.S., Cho Y.S., Jung B.I.

Operational characteristics in the three-phase transformer-type SFCL with neutral line based on sequential reclosing process

Ключевые слова: power equipment, FCL inductive, FCL three-phase, recovery characteristics, core iron, HTS, critical caracteristics, current-voltage characteristics, current limiting characteristics, quench properties, experimental results

Physica C, 2011, v.471, N 21-22, p.1341-1347

Полный текст на Sci-Hub

Дополнительная информация

Choi H.S., Cho Y.S., Jung B.I., Ha K.H., Choi S.G., Park H.M.

Recovery behavior based on reclosing operation and a neutral line of three-phase flux-coupling type SFCL

Ключевые слова: FCL inductive, recovery characteristics, FCL three-phase, impedance, critical caracteristics, current-voltage characteristics, voltage waveforms, quench properties, experimental results, modeling, power equipment, HTS, FCL flux-coupling

Physica C, 2011, v.471, N 21-22, p.1337-1340

Полный текст на Sci-Hub

Дополнительная информация

Lim S.H.

Analysis on current limiting characteristics of a flux-lock type SFCL with two triggering current levels

Ключевые слова: power equipment, FCL inductive, HTS, trigger, current limiting characteristics, impedance, YBCO, films, recovery characteristics, experimental results

Physica C, 2011, v.471, N 21-22, p.1354-1357

Полный текст на Sci-Hub

Дополнительная информация

Lim S.H., Kim J.S., Kim J.C.

Analysis on fault current limiting and bus-voltage sag suppressing operations of SFCLs using magnetic coupling of two coils according to their application locations in a power distribution system

Ключевые слова: power equipment, power distribution system, FCL inductive, fault currents, coils, modeling computational, numerical analysis, design parameters, current waveforms

Physica C, 2011, v.471, N 21-22, p.1358-1363

Полный текст на Sci-Hub

Дополнительная информация

Mehta S.

US effort on HTS power transformers

Ключевые слова: power equipment, HTS, transformers, review, coated conductors, quench current, recovery characteristics, transformer current limiting

Physica C, 2011, v.471, N 21-22, p.1364-1366

Полный текст на Sci-Hub

Дополнительная информация

Iijima Y., Izumi T., Shiohara Y., Hayashi H., Iwakuma M., Saito T., Okamoto H., Tomioka A., Tanabe K., Gosho Y., Otonari T., Ogata T.

AC over-current test results of YBCO conductor for YBCO power transformer with fault current limiting function

Ключевые слова: power equipment, transformer current limiting, HTS, YBCO, overcurrent, test results, current waveforms, voltage waveforms, coils model, ac performance

Physica C, 2011, v.471, N 21-22, p.1367-1373

Полный текст на Sci-Hub

Дополнительная информация

Iijima Y., Izumi T., Shiohara Y., Hayashi H., Iwakuma M., Saito T., Okamoto H., Tomioka A., Tanabe K., Gosho Y., Otonari T., Ogata T.

The short-circuit test results of 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer

Ключевые слова: power equipment, HTS, YBCO, transformers, short circuit test, coated conductors, critical caracteristics, current-voltage characteristics

Physica C, 2011, v.471, N 21-22, p.1374-1378

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: current

Cooperative doping effects of Ti and nano-SiC on transport critical current density and grain connectivity of in situ MgB2 tapes

Flux pinning properties of MgB2 thin films on Al tape substrates deposited by electron beam evaporation

Microstructure and transport properties of FeTe0.5Se0.5 superconducting wires fabricated by ex-situ Powder-in-tube process

Numerical investigations on contactless methods for measuring critical current density in HTS: application of modified constitutive-relation method

Progress of 275 kV–3 kA YBCO HTS cable

Design and evaluation of 66 kV-class HTS power cable using REBCO wires

Modeling of a 22.9 kV 50 MVA superconducting power cable based on PSCAD/EMTDC for application to the Icheon substation in Korea

Recovery time analysis in a tri-axial HTS cable after an over-current fault

Critical current measurements for design of superconducting DC transmission power cable

Evaluation on current-limiting performance of the YBCO thin-film wire considering electric coupling condition

Reclosing operation characteristics of the flux-coupling type SFCL in a single-line-to ground fault

Characteristics of transformer-type superconducting fault current limiter depending on reclosing in changing the number of turns of secondary winding

Characterization of reactors for integrated matrix-type SFCL

Operational characteristics in the three-phase transformer-type SFCL with neutral line based on sequential reclosing process

Recovery behavior based on reclosing operation and a neutral line of three-phase flux-coupling type SFCL

Analysis on current limiting characteristics of a flux-lock type SFCL with two triggering current levels

Analysis on fault current limiting and bus-voltage sag suppressing operations of SFCLs using magnetic coupling of two coils according to their application locations in a power distribution system

US effort on HTS power transformers

AC over-current test results of YBCO conductor for YBCO power transformer with fault current limiting function

The short-circuit test results of 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer