Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Ключевые слова: modeling
Показаны 2361−2380 из 4747	< предыдущая 1 ... 117 118 119 120 121 ... 238 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Sugimoto N., Iguchi N., Kusano Y., Fukano T., Hioki T., Ichiki A., Bessho T., Motohiro T.

Compact SMES with a superconducting film in a spiral groove on a Si wafer formed by MEMS technology with possible high-energy storage volume density comparable to that of rechargeable batteries

Ключевые слова: SMES, hybrid systems, substrate Si, NbN, coils helical, modeling, numerical analysis, model small-scale, current-voltage characteristics, critical caracteristics, flux density, charging characteristics

Superconductor Science Technology, 2017, v.30, N 1, p.15014

Полный текст на Sci-Hub

Дополнительная информация

Zhang H., Yuan W., Zhang M.

An efficient 3D finite element method model based on the T–A formulation for superconducting coated conductors

Ключевые слова: HTS, coated conductors, modeling, aspect ratios, penetration depth, current distribution, magnetic field distribution, ac losses, coils racetrack, flux density, transport currents

Superconductor Science Technology, 2017, v.20, N 2, p.24005

Полный текст на Sci-Hub

Дополнительная информация

Wang J., Ma G., Ye C., Liu K.

Observation of the Field, Current and Force Distributions in an Optimized Superconducting Levitation with Translational Symmetry

Ключевые слова: Maglev system, levitation performance, HTS, modeling, numerical analysis, flux density, distribution

J Low Temperature Physics, 2017, v.186, N 1-2, p.106-120

Полный текст на Sci-Hub

Дополнительная информация

Tomsic M., Doll D., Deissler R.J., Amin A.A., Akkus O., Baig T.N., Sabri L., Martens M.A.

Effect of mechanical support conditions of winding on the strain development of a composite MgB2 based full body MRI coil

Ключевые слова: MRI magnets, MgB2, winding techniques, coils, modeling, numerical analysis, mechanical properties, strain effects, distribution

EUROPEAN SUPERCONDUCTIVITY NEWS FORUM, 2017, v.39, N , p.562

Полный текст на Sci-Hub

Дополнительная информация

Bruzzone P., Uglietti D., Muzzi L., Marzi G.D., Bykovsky N.

Magnetization loss for stacks of ReBCO tapes

Ключевые слова: HTS, REBCO, coated conductor modules, stacked blocks, magnetization, modeling, numerical analysis, current distribution, critical state model, ac losses, experimental results

Superconductor Science Technology, 2017, v.30, N 2, p.24010

Полный текст на Sci-Hub

Дополнительная информация

Xiao L., Lin L., Yang J., Zhang G., Guo T., Zhang Z., Qi Q.

Resistance varying characteristics of DC superconducting fault current limiter in MTDC system

Ключевые слова: power equipment, power transmission lines, dc performance, FCL resistive, HTS, YBCO, coated conductors, modeling, numerical analysis, resistance, overcurrent, current waveforms, voltage waveforms, design, inductance, current, voltage, long conductors, current limiting characteristics

Cryogenics, 2017, v.81, N 1, p.1-7

Полный текст на Sci-Hub

Дополнительная информация

Grohmann S., Shabagin E., Heidt C., Strau? S.

Modelling of 3D temperature profiles and pressure drop in concentric three-phase HTS power cables

Ключевые слова: power equipment, HTS, cables three-phase, cables triaxial, temperature distribution, pressure drop, modeling, thermal-hydraulics, nitrogen liquid , cryogenic systems, refrigerator, modeling, ac losses, comparison, test long-term operation, power, dissipative properties

Cryogenics, 2017, v.81, N 1, p.24-32

Полный текст на Sci-Hub

Дополнительная информация

Pitel J.

On one selected problem in mathematical modeling of superconducting cylindrical coils in case of using the Ic(B) characteristic linearized in parts

Ключевые слова: coils solenoidal, magnetic field distribution, homogeneity, MgB2/Ni, wires multifilamentary, critical caracteristics, current-voltage characteristics, geometry effects, modeling, numerical analysis

Cryogenics, 2017, v.81, N 1, p.33-41

Полный текст на Sci-Hub

Дополнительная информация

Fabbricatore P., Gambardella U., Farinon S., Iannone G.

Numerical modeling of critical-state magnetization in type-II superconducting cylinders under parallel and transverse magnetic field

Ключевые слова: cylinders, numerical analysis, modeling, magnetization, critical state model, magnetic field dependence, anisotropy, magnetization curves

Cryogenics, 2017, v.81, N 1, p.107-114

Полный текст на Sci-Hub

Дополнительная информация

Ibrahim D.K., Zahab E.E., Mostafa S.A.

New coordination approach to minimize the number of re-adjusted relays when adding DGs in interconnected power systems with a minimum value of fault current limiter

Ключевые слова: power equipment, power distribution system, modeling, FCL, new

International J Electrical Power Energy Systems, 2017, v.85, N , p.32-41

Полный текст на Sci-Hub

Дополнительная информация

Liu J., Huang C.

Magnetic and mechanical properties of a finite-thickness superconducting strip with a cavity in oblique magnetic fields

Ключевые слова: strips, mechanical properties, crack formation, defects, magnetic field dependence, modeling, numerical analysis, magnetization, torque, stress effects, stress distribution

J Applied Physics, 2017, v.121, N 2, p.23905

Полный текст на Sci-Hub

Дополнительная информация

Grilli F., Stepien M., Zermeno V.M., Habelok K.

A parameter-free method to extract the superconductor's J c(B,theta) field-dependence from in-field current–voltage characteristics of high temperature superconductor tapes

Ключевые слова: HTS, coated conductors, measurement technique, critical caracteristics, current-voltage characteristics, Jc/B curves, critical current density, angular dependence, modeling, numerical analysis

Superconductor Science Technology, 2017, v.30, N 3, p.34001

Полный текст на Sci-Hub

Дополнительная информация

Stenvall A., Lahtinen V., Ruuskanen J.

Predicting Heat Propagation in Roebel-Cable-Based Accelerator Magnet Prototype: One-Dimensional Approach With Coupled Turns

Ключевые слова: accelerator magnets, prototype, Roebel conductors, HTS, coated conductors, heat transfer, modeling, quench protection, numerical analysis, temperature distribution

IEEE Transactions Applied Superconductivity, 2017, v.27, N 4-1, p.600205

Полный текст на Sci-Hub

Дополнительная информация

Ciazynski D., Zani L., Torre A., Turck B., Topin F., Louzguiti A., Duchateau J.

AC Coupling Losses in CICCs: Analytical Modeling at Different Stages

Ключевые слова: cable-in-conduit conductor, ac losses, modeling, nucleation, transient performance

IEEE Transactions Applied Superconductivity, 2017, v.27, N 4-1, p.600505

Полный текст на Sci-Hub

Дополнительная информация

Hossain M.E.

Performance analysis of diode-bridge-type non-superconducting fault current limiter in improving transient stability of DFIG based variablespeed wind generator

Ключевые слова: wind farms application, transient performance, stability, FCL resistive, current limiting characteristics, modeling, numerical analysis, power equipment

Electric Power Systems Research, 2017, v.143, N , p.782-793

Полный текст на Sci-Hub

Дополнительная информация

Yang J., Chen L., Liu Y., Ren L., Chen H., Zhen K.

Coordinated Control of Superconducting Fault Current Limiter and Superconducting Magnetic Energy Storage for Transient Performance Enhancement of Grid-Connected Photovoltaic Generation System

Ключевые слова: grid operation, FCL, SMES, transient performance, modeling, numerical analysis, renewable energy systems, fault currents, current limiting characteristics, control systems, power equipment, solar photovoltaic system

Energies, 2017, v.10, N 1, p.56

Полный текст на Sci-Hub

Дополнительная информация

Garcia-Tabares L., Toral F., Stenvall A., Salmi T., Martinez T., Ruuskanen J., Munilla J.

EuroCirCol 16 T Common-Coil Dipole Option for the FCC

Ключевые слова: FCC, magnets dipole, coils, high field magnets, design, design parameters, LTS, Nb3Sn, modeling

IEEE Transactions Applied Superconductivity, 2017, v.27, N 4-2, p.4001105

Полный текст на Sci-Hub

Дополнительная информация

Volpini G., Fabbricatore P., Farinon S., Bellomo G., Sorbi M., Marinozzi V., Caiffi B.

The EuroCirCol 16T Cosine–Theta Dipole Option for the FCC

Ключевые слова: FCC, magnets dipole, modeling, design, design parameters, quench, LTS, Nb3Sn, Rutherford cables, magnetic field distribution

IEEE Transactions Applied Superconductivity, 2017, v.27, N 4-2, p.4001205

Полный текст на Sci-Hub

Дополнительная информация

Tixador P., Bruzek C., Sirois F., Badel A., Escamez G., Tousignant M., Granger C.

Experimental characterization of the constitutive materials of MgB2 multi-filamentary wires for the development of 3D numerical models

Ключевые слова: MgB2/Ni, MgB2/Monel, wires multifilamentary, modeling, numerical analysis, ac losses, magnetization, critical caracteristics, critical current, flux density, n-value, current-voltage characteristics, experimental results

Superconductor Science Technology, 2017, v.30, N 3, p.34008

Полный текст на Sci-Hub

Дополнительная информация

Sykes A., Windsor C.G., Morgan J.G., Buxton P.F., Costley A.E., Smith G.D.

Modelling the power deposition into a spherical tokamak fusion power plant

Ключевые слова: Tokamak, modeling, fusion, magnets, design, modeling, spheres, design parameters, power plants, power, shields

Nuclear Fusion, 2017, v.57, N 3, p.36001

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Ключевые слова: modeling

Compact SMES with a superconducting film in a spiral groove on a Si wafer formed by MEMS technology with possible high-energy storage volume density comparable to that of rechargeable batteries

An efficient 3D finite element method model based on the T–A formulation for superconducting coated conductors

Observation of the Field, Current and Force Distributions in an Optimized Superconducting Levitation with Translational Symmetry

Effect of mechanical support conditions of winding on the strain development of a composite MgB2 based full body MRI coil

Magnetization loss for stacks of ReBCO tapes

Resistance varying characteristics of DC superconducting fault current limiter in MTDC system

Modelling of 3D temperature profiles and pressure drop in concentric three-phase HTS power cables

On one selected problem in mathematical modeling of superconducting cylindrical coils in case of using the Ic(B) characteristic linearized in parts

Numerical modeling of critical-state magnetization in type-II superconducting cylinders under parallel and transverse magnetic field

New coordination approach to minimize the number of re-adjusted relays when adding DGs in interconnected power systems with a minimum value of fault current limiter

Magnetic and mechanical properties of a finite-thickness superconducting strip with a cavity in oblique magnetic fields

A parameter-free method to extract the superconductor's J c(B,theta) field-dependence from in-field current–voltage characteristics of high temperature superconductor tapes

Predicting Heat Propagation in Roebel-Cable-Based Accelerator Magnet Prototype: One-Dimensional Approach With Coupled Turns

AC Coupling Losses in CICCs: Analytical Modeling at Different Stages

Performance analysis of diode-bridge-type non-superconducting fault current limiter in improving transient stability of DFIG based variablespeed wind generator

Coordinated Control of Superconducting Fault Current Limiter and Superconducting Magnetic Energy Storage for Transient Performance Enhancement of Grid-Connected Photovoltaic Generation System

EuroCirCol 16 T Common-Coil Dipole Option for the FCC

The EuroCirCol 16T Cosine–Theta Dipole Option for the FCC

Experimental characterization of the constitutive materials of MgB2 multi-filamentary wires for the development of 3D numerical models

Modelling the power deposition into a spherical tokamak fusion power plant