Ключевые слова: SULTAN, measurement setup, optical properties, fibers, sensors, temperature dependence, HTS, REBCO, tapes, quench detection, cryogenic systems
Ключевые слова: HTS, Bi2212, wires, insulation coating, fabrication, test results, ceramics
Ключевые слова: fusion magnets, HTS, tapes, coils, quench detection, MgB2, Nb3Sn, pnictides, wires, winding techniques, resistance, SULTAN, hot spots, experimental results
Ключевые слова: REBCO, coated conductors, cable-in-conduit conductor, design parameters, fusion magnets, heat capacity, critical current, angular dependence, quench properties, thermal-hydraulics, normal zone propagation, RRR parameter, twist-pitch, contact characteristics, resistance, n-value, magnetic field dependence, HTS
Ключевые слова: HTS, REBCO, coated conductors, stacked blocks, twisting, cable-in-conduit conductor, quench properties, modeling, thermal-hydraulics, contact characteristics, resistance, DEMO, central coils, coils solenoidal, magnetic field distribution, critical caracteristics, critical current distribution, temperature distribution, interstrand contact resistances, normal zone propagation, hot spots, numerical analysis
Sedlak K., Anvar V.A., Bagrets N., Biancolini M.E., Bonifetto R., Bonne F., Boso D., Brighenti A., Bruzzone P., Celentano G., Chiappa A., D'Auria V., Dan M., Decool P.*10, Corte A.D., Dembkowska A.*11, Dicuonzo O., Duran I.*12, Eisterer M.*13, Ferro A., Zignani C.F., Fietz W.H., Frittitta C., Gaio E., Giannini L., Giorgetti F., Gomory F.*14, Granados X.*15, Guarino R., Heller R., Hoa C., Ivashov I.*16, Jiolat G.*10, Jirsa M.*17, Jose B.*10, Kembleton R.*18, Kumar M., Lacroix B.*10, Coz Q.L.*19, Lewandowska M.*11, Maistrello A., Misiara N.*10, Morici L., Muzzi L., Nicollet S.*10, Nijhuis A., Nunio F.*10, Portafaix C.*10, Romanelli G., Sarasola X., Savoldi L., Stepanov B., Tiseanu I.*20, Tomassetti G., Torre A.*10, Turtщ S., Uglietti D., Vallcorba R.*10, Viererbl L.*21, Vojenciak M.*14, Vorpahl C.*18, Weiss K., Wesche R., Wolf M.J., Zani L.*10, Zanino R., Zappatore A., Corato V.
Ключевые слова: HTS, REBCO, coated conductors, soldered-stacked-square wire, twisting, design parameters, strands, quench, modeling, cable-in-conduit conductor, thermal-hydraulics, critical caracteristics, critical current distribution, angular dependence, inductance, hot spots, minimum quench energy, quench propagation, pressure distributions, heat transfer, interstrand contact resistances
Ключевые слова: HTS, REBCO, coated conductors, stacked blocks, fusion magnets, LTS, NbTi, Bi2223, tapes, comparison, twisting, stability, inductance, ac losses, numerical analysis
Ключевые слова: HTS, REBCO, coated conductors, CORC cables, twisting, stacked blocks, Bi2223/Ag, Bi2212, tapes, LTS, Nb3Sn, wires, cables, Roebel conductors, Rutherford cables, high field magnets, review, commercialization, critical caracteristics, mechanical properties, critical current, magnetic field dependence, angular dependence, economic analysis, review
Ключевые слова: magnets dipole, LTS, Nb3Sn, design parameters, Rutherford cables, diffusion process, solder, welding, comparison, joints, joint resistances, magnetic field dependence, test results
Wesche R., Bruzzone P., Stepanov B., Uglietti D., Muzzi L., Corato V., Corte A.D., Affinito L., Sedlak K., Sarasola X., D'Auria V., Vorpahl C.
Ключевые слова: DEMO, coils toroidal, react-and-wind technique, LTS, Nb3Sn, cables, fabrication, jacketing, current sharing, cycling, test results
Ключевые слова: Europe, DEMO, magnetic systems, hybrid systems, central coils, coils solenoidal, design, LTS, Nb3Sn, NbTi, HTS, REBCO, coated conductors, critical caracteristics, magnetic field dependence, critical current density, geometry effects, flux density, design, stainless steel, mechanical properties, stress effects, numerical analysis
Bruzzone P., Stepanov B., Uglietti D., Augieri A., Muzzi L., Corato V., Marzi G.D., Corte A.D., Zignani C.F., Sedlak K.
Ключевые слова: DEMO, Europe, central coils, coils solenoidal, design, HTS, REBCO, coated conductors, high field magnets, hybrid systems, LTS, NbTi, Nb3Sn, react-and-wind technique, mechanical properties, loads, stress distribution, modeling
Ключевые слова: HTS, fusion, DEMO, HTS, central coils, cables, ac losses, experimental results, modeling, scaling law, numerical analysis
Ключевые слова: HTS, cables, high field tests, coated conductors, twisting, stacked blocks, fusion magnets, REBCO, critical temperature, current, operational performance
Ключевые слова: HTS, coated conductors, stacked blocks, twisting, strands, design parameters, wires round, cables, fusion magnets, mechanical properties, stress distribution, stress effects, strain effects, experimental results, critical caracteristics, critical current, loads, cycling, fabrication, prototype
Ключевые слова: DEMO, coils solenoidal, winding configurations, design, HTS, REBCO, coated conductors, LTS, Nb3Sn, NbTi, mechanical properties, stress effects, geometry effects, modeling
Ключевые слова: EDIPO, HTS, high current processing, measurement setup, high field tests, facility
Ключевые слова: fusion magnets, coils toroidal, central coils, coils solenoidal, HTS, cables, coated conductors, twisting, stacked blocks, modeling, mechanical properties, bending process
Ключевые слова: fusion magnets, HTS, coated conductors, Bi2212, Bi2223, REBCO, cables, critical caracteristics, critical current, temperature dependence, DEMO, LTS, Nb3Sn, twist-pitch, bending radius, review, high field magnets
Ключевые слова: EDIPO, magnetic systems, LTG process, Nb3Sn, strands, quench detection, cable-in-conduit conductor, flux jumps, coils racetrack
Ключевые слова: measurement setup, SULTAN, EDIPO, HTS, cables, test results, design, heat exchanger, high current processing, HTS, coated conductors, upgrade
Bruzzone P., Uglietti D., Turtu S., Celentano G., Muzzi L., Marzi G.D., Corte A.D., Seri M., Sedlak K., Bykovsky N.
Ключевые слова: DEMO, LTS, HTS, high current processing, status, coils toroidal, NbTi, Nb3Sn, ITER, design parameters, comparison, coils wind-and-react, react-and-wind technique, prototype, fabrication
Ключевые слова: HTS, REBCO, coated conductors, cables, fusion magnets, prototype, test results, IBAD process, MOCVD process, PLD process, critical caracteristics, current-voltage characteristics, critical current, magnetic field dependence, angular dependence, EDIPO, temperature dependence, dc performance, ac performance, ac losses, high field magnets
Ключевые слова: fusion magnets, HTS, high field magnets, cables, comparison, twist-pitch, strain effects, mechanical properties, fabrication, strands, bending process, critical caracteristics, transverse stress, geometry effects, critical current, magnetic field dependence, ac losses, joints, current-voltage characteristics, review, presentation
Ключевые слова: fusion magnets, ITER, DEMO, HTS, Bi2212, wires, REBCO, coated conductors, strands, fabrication, critical caracteristics, critical current, bending radius, mechanical properties, pressure dependence, transverse stress, magnetic field dependence, cables, twisting, termination, SULTAN, EDIPO, test results, DI-Bi2223, tapes, high field magnets
Ключевые слова: HTS, coated conductors, fusion magnets, cables, design, strands, test results, wires round, stacked blocks, twist-pitch, fabrication, critical caracteristics, critical current, bending process, mechanical properties, torsion strain, current-voltage characteristics, joints, joints, REBCO, YBCO, high field magnets
Wesche R., Bruzzone P., Stepanov B., Uglietti D., Vogel M., Portone A., Cau F., Jenni M., Croari G., March S.
Ключевые слова: measurement setup, EDIPO, high field magnets, LTS, Nb3Sn, cable-in-conduit conductor, installation, cooling technology, commissioning, facility
Ключевые слова: coils solenoidal, high field magnets, HTS, coated conductors, review, YBCO, REBCO, fabrication, doping effect, critical caracteristics, ac losses, substrates, mechanical properties, stability, laminations, strain effects, transverse stress, winding techniques, impregnation, insulation, joints, quench protection, normal zone propagation, insulationless
Ripamonti G., Bruzzone P.L., Uglietti D., Giunchi G., Perini E., Saglietti L., Albisetti A.F., Schiavone C.
Ключевые слова: LTS, Nb3Sn, cable-in-conduit conductor, current sharing, ITER, numerical analysis
Ключевые слова: magnetic systems, hybrid systems, HTS, coils insert, coated conductors, quench protection, design, stabilizing layers, hot spots, YBCO
Ключевые слова: HTS, coils insert, coated conductors, design parameters, REBCO, mechanical properties, stress effects
Ключевые слова: HTS, fusion magnets, thermal stability, quench properties, Bi2212, wires, critical caracteristics, critical current density, mechanical properties, n-value, current leads, Bi2223, cables, prototype, EDIPO, coils insert, YBCO, coated conductors, cryogenic systems, presentation, high field magnets
Uglietti D., Takao T., Kiyoshi T., Takahashi M., Maeda H., Yanagisawa Y., Nakagome H., Hu R., Takematsu T., Kominato Y.
Ключевые слова: HTS, YBCO, coils solenoidal, design parameters, numerical analysis, coated conductors, shielding effects, screen
Uglietti D., Takao T., Kiyoshi T., Takahashi M., Maeda H., Yanagisawa Y., Nakagome H., Hu R., Takematsu T.
Ключевые слова: HTS, YBCO, coated conductors, coils solenoidal, shielding effects, experimental results, screen
Ключевые слова: LTS, Nb3Sn, patents, fabrication, diffusion process, wires multifilamentary
Ключевые слова: MgB2, LTS, Nb3Sn, wires, doping effect, resistivity, pinning force, Jc/B curves, experimental results, critical caracteristics
Ключевые слова: LTS, Nb3Sn, doping effect, wires multifilamentary, bronze process, fabrication, Jc/B curves, n-value, experimental results, critical caracteristics
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, fabrication, comparison, specific heat, critical temperature, measurement technique, critical caracteristics
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, fabrication, composition, grain size
Flukiger R., Wang Y., Uglietti D., Abacherli V., Senatore C.(carmine.senatore@physics.unige.ch)
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, specific heat, experimental results
Ключевые слова: HTS, YBCO, coated conductors, Jc/B curves, strain effects, temperature dependence, n-value, experimental results, critical caracteristics
Flukiger R., Lezza P., Uglietti D., Abacherli V., Pollini A., Eckert D., Seeber B.(bernd.seeber@physics.unige.ch), Bovier P.-A., Kubler G.
Ключевые слова: measurement setup, critical current, strain effects, wires, tapes, LTS, Nb3Sn, HTS, Bi2223, n-value, experimental results, critical caracteristics, length
Ключевые слова: LTS, Nb3Sn, wires, stress effects, strain effects, Jc/B curves, mechanical properties, experimental results, critical caracteristics
Ключевые слова: measurement setup, critical current, mechanical properties, n-value, LTS, HTS, tapes, wires, critical caracteristics, magnetic properties
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.